Merge tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  There are a few fixes for new code bugs, including the Mellanox one
  noted in the last networking pull. No known regressions outstanding.

  Current release - regressions:

   - sched: clear actions pointer in miss cookie init fail

   - mptcp: fix accept vs worker race

   - bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390

   - eth: bnxt_en: fix a possible NULL pointer dereference in unload
     path

   - eth: veth: take into account peer device for
     NETDEV_XDP_ACT_NDO_XMIT xdp_features flag

  Current release - new code bugs:

   - eth: revert "net/mlx5: Enable management PF initialization"

  Previous releases - regressions:

   - netfilter: fix recent physdev match breakage

   - bpf: fix incorrect verifier pruning due to missing register
     precision taints

   - eth: virtio_net: fix overflow inside xdp_linearize_page()

   - eth: cxgb4: fix use after free bugs caused by circular dependency
     problem

   - eth: mlxsw: pci: fix possible crash during initialization

  Previous releases - always broken:

   - sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg

   - netfilter: validate catch-all set elements

   - bridge: don't notify FDB entries with "master dynamic"

   - eth: bonding: fix memory leak when changing bond type to ethernet

   - eth: i40e: fix accessing vsi->active_filters without holding lock

  Misc:

   - Mat is back as MPTCP co-maintainer"

* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
  net: bridge: switchdev: don't notify FDB entries with "master dynamic"
  Revert "net/mlx5: Enable management PF initialization"
  MAINTAINERS: Resume MPTCP co-maintainer role
  mailmap: add entries for Mat Martineau
  e1000e: Disable TSO on i219-LM card to increase speed
  bnxt_en: fix free-runnig PHC mode
  net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
  bpf: Fix incorrect verifier pruning due to missing register precision taints
  hamradio: drop ISA_DMA_API dependency
  mlxsw: pci: Fix possible crash during initialization
  mptcp: fix accept vs worker race
  mptcp: stops worker on unaccepted sockets at listener close
  net: rpl: fix rpl header size calculation
  net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
  bonding: Fix memory leak when changing bond type to Ethernet
  veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
  mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
  bnxt_en: Fix a possible NULL pointer dereference in unload path
  bnxt_en: Do not initialize PTP on older P3/P4 chips
  netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
  ...

Author: torvalds

.mailmap

@@ -299,6 +299,8 @@ Martin Kepplinger <martink@posteo.de> <martin.kepplinger@puri.sm>
 Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
 Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com> <martyna.szapar-mudlaw@intel.com>
 Mathieu Othacehe <m.othacehe@gmail.com>
+Mat Martineau <martineau@kernel.org> <mathew.j.martineau@linux.intel.com>
+Mat Martineau <martineau@kernel.org> <mathewm@codeaurora.org>
 Matthew Wilcox <willy@infradead.org> <matthew.r.wilcox@intel.com>
 Matthew Wilcox <willy@infradead.org> <matthew@wil.cx>
 Matthew Wilcox <willy@infradead.org> <mawilcox@linuxonhyperv.com>

Documentation/networking/devlink/ice.rst

@@ -7,6 +7,21 @@ ice devlink support
 This document describes the devlink features implemented by the ``ice``
 device driver.
 
+Parameters
+==========
+
+.. list-table:: Generic parameters implemented
+
+   * - Name
+     - Mode
+     - Notes
+   * - ``enable_roce``
+     - runtime
+     - mutually exclusive with ``enable_iwarp``
+   * - ``enable_iwarp``
+     - runtime
+     - mutually exclusive with ``enable_roce``
+
 Info versions
 =============
 

MAINTAINERS

@@ -14594,6 +14594,7 @@ F:	net/netlabel/
 
 NETWORKING [MPTCP]
 M:	Matthieu Baerts <matthieu.baerts@tessares.net>
+M:	Mat Martineau <martineau@kernel.org>
 L:	netdev@vger.kernel.org
 L:	mptcp@lists.linux.dev
 S:	Maintained

arch/s390/net/bpf_jit_comp.c

@@ -539,7 +539,7 @@ static void bpf_jit_plt(void *plt, void *ret, void *target)
 {
 	memcpy(plt, bpf_plt, BPF_PLT_SIZE);
 	*(void **)((char *)plt + (bpf_plt_ret - bpf_plt)) = ret;
-	*(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target;
+	*(void **)((char *)plt + (bpf_plt_target - bpf_plt)) = target ?: ret;
 }
 
 /*
@@ -2010,7 +2010,9 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 	} __packed insn;
 	char expected_plt[BPF_PLT_SIZE];
 	char current_plt[BPF_PLT_SIZE];
+	char new_plt[BPF_PLT_SIZE];
 	char *plt;
+	char *ret;
 	int err;
 
 	/* Verify the branch to be patched. */
@@ -2032,12 +2034,15 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t,
 		err = copy_from_kernel_nofault(current_plt, plt, BPF_PLT_SIZE);
 		if (err < 0)
 			return err;
-		bpf_jit_plt(expected_plt, (char *)ip + 6, old_addr);
+		ret = (char *)ip + 6;
+		bpf_jit_plt(expected_plt, ret, old_addr);
 		if (memcmp(current_plt, expected_plt, BPF_PLT_SIZE))
 			return -EINVAL;
 		/* Adjust the call address. */
+		bpf_jit_plt(new_plt, ret, new_addr);
 		s390_kernel_write(plt + (bpf_plt_target - bpf_plt),
-				  &new_addr, sizeof(void *));
+				  new_plt + (bpf_plt_target - bpf_plt),
+				  sizeof(void *));
 	}
 
 	/* Adjust the mask of the branch. */

drivers/net/bonding/bond_main.c

@@ -1777,14 +1777,15 @@ void bond_lower_state_changed(struct slave *slave)
 
 /* The bonding driver uses ether_setup() to convert a master bond device
  * to ARPHRD_ETHER, that resets the target netdevice's flags so we always
- * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE if it was set
+ * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE and IFF_UP
+ * if they were set
  */
 static void bond_ether_setup(struct net_device *bond_dev)
 {
-	unsigned int slave_flag = bond_dev->flags & IFF_SLAVE;
+	unsigned int flags = bond_dev->flags & (IFF_SLAVE | IFF_UP);
 
 	ether_setup(bond_dev);
-	bond_dev->flags |= IFF_MASTER | slave_flag;
+	bond_dev->flags |= IFF_MASTER | flags;
 	bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING;
 }
 

drivers/net/dsa/microchip/ksz8795.c

@@ -96,7 +96,7 @@ static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size)
 
 	if (frame_size > KSZ8_LEGAL_PACKET_SIZE)
 		ctrl2 |= SW_LEGAL_PACKET_DISABLE;
-	else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
+	if (frame_size > KSZ8863_NORMAL_PACKET_SIZE)
 		ctrl1 |= SW_HUGE_PACKET;
 
 	ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1);

drivers/net/ethernet/broadcom/bnxt/bnxt.c

@@ -2388,7 +2388,7 @@ static int bnxt_async_event_process(struct bnxt *bp,
 	case ASYNC_EVENT_CMPL_EVENT_ID_PHC_UPDATE: {
 		switch (BNXT_EVENT_PHC_EVENT_TYPE(data1)) {
 		case ASYNC_EVENT_CMPL_PHC_UPDATE_EVENT_DATA1_FLAGS_PHC_RTC_UPDATE:
-			if (bp->fw_cap & BNXT_FW_CAP_PTP_RTC) {
+			if (BNXT_PTP_USE_RTC(bp)) {
 				struct bnxt_ptp_cfg *ptp = bp->ptp_cfg;
 				u64 ns;
 
@@ -7627,7 +7627,7 @@ static int __bnxt_hwrm_ptp_qcfg(struct bnxt *bp)
 	u8 flags;
 	int rc;
 
-	if (bp->hwrm_spec_code < 0x10801) {
+	if (bp->hwrm_spec_code < 0x10801 || !BNXT_CHIP_P5_THOR(bp)) {
 		rc = -ENODEV;
 		goto no_ptp;
 	}

drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c

@@ -304,7 +304,7 @@ void bnxt_rdma_aux_device_uninit(struct bnxt *bp)
 	struct auxiliary_device *adev;
 
 	/* Skip if no auxiliary device init was done. */
-	if (!(bp->flags & BNXT_FLAG_ROCE_CAP))
+	if (!bp->aux_priv)
 		return;
 
 	aux_priv = bp->aux_priv;
@@ -324,6 +324,7 @@ static void bnxt_aux_dev_release(struct device *dev)
 	bp->edev = NULL;
 	kfree(aux_priv->edev);
 	kfree(aux_priv);
+	bp->aux_priv = NULL;
 }
 
 static void bnxt_set_edev_info(struct bnxt_en_dev *edev, struct bnxt *bp)
@@ -359,19 +360,18 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp)
 	if (!(bp->flags & BNXT_FLAG_ROCE_CAP))
 		return;
 
-	bp->aux_priv = kzalloc(sizeof(*bp->aux_priv), GFP_KERNEL);
-	if (!bp->aux_priv)
+	aux_priv = kzalloc(sizeof(*bp->aux_priv), GFP_KERNEL);
+	if (!aux_priv)
 		goto exit;
 
-	bp->aux_priv->id = ida_alloc(&bnxt_aux_dev_ids, GFP_KERNEL);
-	if (bp->aux_priv->id < 0) {
+	aux_priv->id = ida_alloc(&bnxt_aux_dev_ids, GFP_KERNEL);
+	if (aux_priv->id < 0) {
 		netdev_warn(bp->dev,
 			    "ida alloc failed for ROCE auxiliary device\n");
-		kfree(bp->aux_priv);
+		kfree(aux_priv);
 		goto exit;
 	}
 
-	aux_priv = bp->aux_priv;
 	aux_dev = &aux_priv->aux_dev;
 	aux_dev->id = aux_priv->id;
 	aux_dev->name = "rdma";
@@ -380,10 +380,11 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp)
 
 	rc = auxiliary_device_init(aux_dev);
 	if (rc) {
-		ida_free(&bnxt_aux_dev_ids, bp->aux_priv->id);
-		kfree(bp->aux_priv);
+		ida_free(&bnxt_aux_dev_ids, aux_priv->id);
+		kfree(aux_priv);
 		goto exit;
 	}
+	bp->aux_priv = aux_priv;
 
 	/* From this point, all cleanup will happen via the .release callback &
 	 * any error unwinding will need to include a call to

drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_flower.c

@@ -1135,7 +1135,7 @@ void cxgb4_cleanup_tc_flower(struct adapter *adap)
 		return;
 
 	if (adap->flower_stats_timer.function)
-		del_timer_sync(&adap->flower_stats_timer);
+		timer_shutdown_sync(&adap->flower_stats_timer);
 	cancel_work_sync(&adap->flower_stats_work);
 	rhashtable_destroy(&adap->flower_tbl);
 	adap->tc_flower_initialized = false;

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -5288,31 +5288,6 @@ static void e1000_watchdog_task(struct work_struct *work)
 				ew32(TARC(0), tarc0);
 			}
 
-			/* disable TSO for pcie and 10/100 speeds, to avoid
-			 * some hardware issues
-			 */
-			if (!(adapter->flags & FLAG_TSO_FORCE)) {
-				switch (adapter->link_speed) {
-				case SPEED_10:
-				case SPEED_100:
-					e_info("10/100 speed: disabling TSO\n");
-					netdev->features &= ~NETIF_F_TSO;
-					netdev->features &= ~NETIF_F_TSO6;
-					break;
-				case SPEED_1000:
-					netdev->features |= NETIF_F_TSO;
-					netdev->features |= NETIF_F_TSO6;
-					break;
-				default:
-					/* oops */
-					break;
-				}
-				if (hw->mac.type == e1000_pch_spt) {
-					netdev->features &= ~NETIF_F_TSO;
-					netdev->features &= ~NETIF_F_TSO6;
-				}
-			}
-
 			/* enable transmits in the hardware, need to do this
 			 * after setting TARC(0)
 			 */
@@ -7526,6 +7501,32 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			    NETIF_F_RXCSUM |
 			    NETIF_F_HW_CSUM);
 
+	/* disable TSO for pcie and 10/100 speeds to avoid
+	 * some hardware issues and for i219 to fix transfer
+	 * speed being capped at 60%
+	 */
+	if (!(adapter->flags & FLAG_TSO_FORCE)) {
+		switch (adapter->link_speed) {
+		case SPEED_10:
+		case SPEED_100:
+			e_info("10/100 speed: disabling TSO\n");
+			netdev->features &= ~NETIF_F_TSO;
+			netdev->features &= ~NETIF_F_TSO6;
+			break;
+		case SPEED_1000:
+			netdev->features |= NETIF_F_TSO;
+			netdev->features |= NETIF_F_TSO6;
+			break;
+		default:
+			/* oops */
+			break;
+		}
+		if (hw->mac.type == e1000_pch_spt) {
+			netdev->features &= ~NETIF_F_TSO;
+			netdev->features &= ~NETIF_F_TSO6;
+		}
+	}
+
 	/* Set user-changeable features (subset of all device features) */
 	netdev->hw_features = netdev->features;
 	netdev->hw_features |= NETIF_F_RXFCS;