Merge tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - error path fixes (qcom-geni)

 - polling mode fix (rk3x)

 - target mode state machine fix (aspeed)

* tag 'i2c-for-6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Handle the coalesced stop conditions with the start conditions.
  i2c: rk3x: fix potential spinlock recursion on poll
  i2c: qcom-geni: fix missing clk_disable_unprepare() and geni_se_resources_off()

Author: torvalds

drivers/i2c/busses/i2c-aspeed.c

@@ -249,18 +249,46 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 	if (!slave)
 		return 0;
 
-	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	/*
+	 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive
+	 * transfers with low enough latency between the nak/stop phase of the current
+	 * command and the start/address phase of the following command that the
+	 * interrupts are coalesced by the time we process them.
+	 */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
+	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
+		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	/* Propagate any stop conditions to the slave implementation. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+	}
 
-	/* Slave was requested, restart state machine. */
+	/*
+	 * Now that we've dealt with any potentially coalesced stop conditions,
+	 * address any start conditions.
+	 */
 	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
 		irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
 		bus->slave_state = ASPEED_I2C_SLAVE_START;
 	}
 
-	/* Slave is not currently active, irq was for someone else. */
+	/*
+	 * If the slave has been stopped and not started then slave interrupt
+	 * handling is complete.
+	 */
 	if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 		return irq_handled;
 
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
 	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 		irq_status, command);
 
@@ -279,17 +307,6 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 	}
 
-	/* Slave was asked to stop. */
-	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
-		irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-	if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
-	    bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
-		irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
-		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
-	}
-
 	switch (bus->slave_state) {
 	case ASPEED_I2C_SLAVE_READ_REQUESTED:
 		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
@@ -324,8 +341,7 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 		break;
 	case ASPEED_I2C_SLAVE_STOP:
-		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
-		bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
+		/* Stop event handling is done early. Unreachable. */
 		break;
 	case ASPEED_I2C_SLAVE_START:
 		/* Slave was just started. Waiting for the next event. */;

drivers/i2c/busses/i2c-qcom-geni.c

@@ -858,6 +858,7 @@ static int geni_i2c_probe(struct platform_device *pdev)
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
 		dev_err(dev, "Error turning on resources %d\n", ret);
+		clk_disable_unprepare(gi2c->core_clk);
 		return ret;
 	}
 	proto = geni_se_read_proto(&gi2c->se);
@@ -877,8 +878,11 @@ static int geni_i2c_probe(struct platform_device *pdev)
 		/* FIFO is disabled, so we can only use GPI DMA */
 		gi2c->gpi_mode = true;
 		ret = setup_gpi_dma(gi2c);
-		if (ret)
+		if (ret) {
+			geni_se_resources_off(&gi2c->se);
+			clk_disable_unprepare(gi2c->core_clk);
 			return dev_err_probe(dev, ret, "Failed to setup GPI DMA mode\n");
+		}
 
 		dev_dbg(dev, "Using GPI DMA mode for I2C\n");
 	} else {
@@ -891,6 +895,8 @@ static int geni_i2c_probe(struct platform_device *pdev)
 
 		if (!tx_depth) {
 			dev_err(dev, "Invalid TX FIFO depth\n");
+			geni_se_resources_off(&gi2c->se);
+			clk_disable_unprepare(gi2c->core_clk);
 			return -EINVAL;
 		}
 

drivers/i2c/busses/i2c-rk3x.c

@@ -178,6 +178,7 @@ struct rk3x_i2c_soc_data {
  * @clk: function clk for rk3399 or function & Bus clks for others
  * @pclk: Bus clk for rk3399
  * @clk_rate_nb: i2c clk rate change notify
+ * @irq: irq number
  * @t: I2C known timing information
  * @lock: spinlock for the i2c bus
  * @wait: the waitqueue to wait for i2c transfer
@@ -200,6 +201,7 @@ struct rk3x_i2c {
 	struct clk *clk;
 	struct clk *pclk;
 	struct notifier_block clk_rate_nb;
+	int irq;
 
 	/* Settings */
 	struct i2c_timings t;
@@ -1087,13 +1089,18 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
 
 		spin_unlock_irqrestore(&i2c->lock, flags);
 
-		rk3x_i2c_start(i2c);
-
 		if (!polling) {
+			rk3x_i2c_start(i2c);
+
 			timeout = wait_event_timeout(i2c->wait, !i2c->busy,
 						     msecs_to_jiffies(WAIT_TIMEOUT));
 		} else {
+			disable_irq(i2c->irq);
+			rk3x_i2c_start(i2c);
+
 			timeout = rk3x_i2c_wait_xfer_poll(i2c);
+
+			enable_irq(i2c->irq);
 		}
 
 		spin_lock_irqsave(&i2c->lock, flags);
@@ -1310,6 +1317,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	i2c->irq = irq;
+
 	platform_set_drvdata(pdev, i2c);
 
 	if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) {