Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', 'clk-allwinner' and 'clk-imx' into clk-next

* clk-rockchip:
  dt-bindings: clock: rockchip: change SPDX-License-Identifier
  dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML
  clk: rockchip: Add clock controller support for RV1126 SoC
  dt-bindings: clock: rockchip: Document RV1126 CRU
  clk: rockchip: Add dt-binding header for RV1126
  clk: rockchip: Add MUXTBL variant

* clk-renesas:
  clk: renesas: r8a779g0: Add EtherAVB clocks
  clk: renesas: r8a779g0: Add PFC/GPIO clocks
  clk: renesas: r8a779g0: Add I2C clocks
  clk: renesas: r8a779g0: Add watchdog clock
  dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC
  clk: renesas: r8a779f0: Add MSIOF clocks
  clk: renesas: r9a09g011: Add IIC clock and reset entries
  clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info
  clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks
  clk: renesas: r8a779f0: Add CMT clocks
  clk: renesas: r8a779f0: Add SDH0 clock

* clk-microchip:
  clk: at91: sama5d2: Add Generic Clocks for UART/USART
  clk: microchip: add PolarFire SoC fabric clock support
  dt-bindings: clk: add PolarFire SoC fabric clock ids
  dt-bindings: clk: document PolarFire SoC fabric clocks
  dt-bindings: clk: rename mpfs-clkcfg binding
  clk: microchip: mpfs: update module authorship & licencing
  clk: microchip: mpfs: convert periph_clk to clk_gate
  clk: microchip: mpfs: convert cfg_clk to clk_divider
  clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo()
  clk: microchip: mpfs: simplify control reg access
  clk: microchip: mpfs: move id & offset out of clock structs
  clk: microchip: mpfs: add MSS pll's set & round rate
  MAINTAINERS: add polarfire soc reset controller
  reset: add polarfire soc reset support
  clk: microchip: mpfs: add reset controller
  dt-bindings: clk: microchip: mpfs: add reset controller support
  clk: microchip: mpfs: make the rtc's ahb clock critical
  clk: microchip: mpfs: fix clk_cfg array bounds violation

* clk-allwinner:
  clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper
  clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper
  clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper
  clk: sunxi-ng: d1: Limit PLL rates to stable ranges

* clk-imx:
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: imx93: add SAI IPG clk
  clk: imx93: add MU1/2 clock
  clk: imx93: switch to use new clk gate API
  clk: imx: add i.MX93 clk gate
  clk: imx: clk-composite-93: check white_list
  clk: imx: clk-composite-93: check slice busy
  dt-bindings: clock: imx93-clock: add more MU/SAI clocks
  dt-bindings: clock: imx8mm: don't use multiple blank lines
  clk: imx8mp: tune the order of enet_qos_root_clk

Author: bebarino

Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };

…etree/bindings/clock/microchip,mpfs.yaml …indings/clock/microchip,mpfs-clkcfg.yamlDocumentation/devicetree/bindings/clock/microchip,mpfs.yaml renamed to Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml Documentation/devicetree/bindings/clock/microchip,mpfs.yaml renamed to Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml#
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip PolarFire Clock Control Module Binding
@@ -40,8 +40,21 @@ properties:
     const: 1
     description: |
       The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
-      for the full list of PolarFire clock IDs.
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
 
 required:
   - compatible

Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml

@@ -24,7 +24,7 @@ description: |
 properties:
   compatible:
     enum:
-      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2}
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
       - renesas,r9a07g044-cpg # RZ/G2{L,LC}
       - renesas,r9a07g054-cpg # RZ/V2L
       - renesas,r9a09g011-cpg # RZ/V2M

Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#