scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63

When upper inbound and outbound queues 32-63 are enabled, we see upper
vectors 32-63 in interrupt service routine. We need corresponding registers
to handle masking and unmasking of these upper interrupts.

To achieve this, we use registers MSGU_ODMR_U(0x34) to mask and
MSGU_ODMR_CLR_U(0x3C) to unmask the interrupts. In these registers bit 0-31
represents interrupt vectors 32-63.

Link: https://lore.kernel.org/r/20220411064603.668448-2-Ajish.Koshy@microchip.com
Fixes: 05c6c02 ("scsi: pm80xx: Increase number of supported queues")
Reviewed-by: John Garry <john.garry@huawei.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Author: Ajish Koshy

drivers/scsi/pm8001/pm80xx_hwi.c

@@ -1727,10 +1727,11 @@ static void
 pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
 #ifdef PM8001_USE_MSIX
-	u32 mask;
-	mask = (u32)(1 << vec);
-
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF));
+	if (vec < 32)
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, 1U << vec);
+	else
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U,
+			    1U << (vec - 32));
 	return;
 #endif
 	pm80xx_chip_intx_interrupt_enable(pm8001_ha);
@@ -1746,12 +1747,15 @@ static void
 pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
 #ifdef PM8001_USE_MSIX
-	u32 mask;
-	if (vec == 0xFF)
-		mask = 0xFFFFFFFF;
+	if (vec == 0xFF) {
+		/* disable all vectors 0-31, 32-63 */
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 0xFFFFFFFF);
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 0xFFFFFFFF);
+	} else if (vec < 32)
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 1U << vec);
 	else
-		mask = (u32)(1 << vec);
-	pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF));
+		pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U,
+			    1U << (vec - 32));
 	return;
 #endif
 	pm80xx_chip_intx_interrupt_disable(pm8001_ha);