i2c: hisi: Add support to get clock frequency from clock

The clk_rate attribute is not generic device tree bindings for I2C
busses described in Documentation/devicetree/bindings/i2c/i2c.txt.
It can be managed by clock binding.

Support the driver to obtain clock information by clk_rate or
clock property. Find clock first, if not, fall back to clk_rate.

Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Author: Weilong Chen

drivers/i2c/busses/i2c-hisi.c

@@ -7,6 +7,7 @@
 
 #include <linux/bits.h>
 #include <linux/bitfield.h>
+#include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -88,6 +89,7 @@ struct hisi_i2c_controller {
 	struct i2c_adapter adapter;
 	void __iomem *iobase;
 	struct device *dev;
+	struct clk *clk;
 	int irq;
 
 	/* Intermediates for recording the transfer process */
@@ -454,10 +456,15 @@ static int hisi_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
-	if (ret) {
-		dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
-		return ret;
+	ctlr->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
+	if (IS_ERR_OR_NULL(ctlr->clk)) {
+		ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
+		if (ret) {
+			dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
+			return ret;
+		}
+	} else {
+		clk_rate_hz = clk_get_rate(ctlr->clk);
 	}
 
 	ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(clk_rate_hz, HZ_PER_KHZ);