Merge tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert FPGA bridge, all TPMs (finally), and Rockchip HDMI bindings
   to schemas

 - Improvements in Samsung GPU schemas

 - A few more cases of dropping unneeded quotes in schemas

 - Merge QCom idle-states txt binding into common idle-states schema

 - Add X1E80100, SM8650, SM8650, and SDX75 SoCs to QCom Power Domain
   Controller

 - Add NXP i.mx8dl to SCU PD

 - Add synaptics r63353 panel controller

 - Clarify the wording around the use of 'wakeup-source' property

 - Add a DTS coding style doc

 - Add smi vendor prefix

 - Fix DT_SCHEMA_FILES incorrect matching of paths outside the kernel
   tree

 - Disable sysfb (e.g. EFI FB) when simple-framebuffer node is present

 - Fix double free in of_parse_phandle_with_args_map()

 - A couple of kerneldoc fixes

* tag 'devicetree-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (37 commits)
  of: unittest: Fix of_count_phandle_with_args() expected value message
  dt-bindings: fpga: altera: Convert bridge bindings to yaml
  dt-bindings: fpga: Convert bridge binding to yaml
  dt-bindings: vendor-prefixes: Add smi
  dt-bindings: power: Clarify wording for wakeup-source property
  of: Fix double free in of_parse_phandle_with_args_map
  dt-bindings: ignore paths outside kernel for DT_SCHEMA_FILES
  drivers: of: Fixed kernel doc warning
  dt-bindings: tpm: Document Microsoft fTPM bindings
  dt-bindings: tpm: Convert IBM vTPM bindings to DT schema
  dt-bindings: tpm: Convert Google Cr50 bindings to DT schema
  dt-bindings: tpm: Consolidate TCG TIS bindings
  dt-bindings: display: rockchip,inno-hdmi: Document RK3128 compatible
  dt-bindings: arm: Add remote etm dt-binding
  dt-bindings: mmc: sdhci-pxa: Fix 'regs' typo
  media: dt-bindings: samsung,s5p-mfc: Fix iommu properties schemas
  dt-bindings: display: panel: Add synaptics r63353 panel controller
  dt-bindings: arm: merge qcom,idle-state with idle-state
  dt-bindings: drm: rockchip: convert inno_hdmi-rockchip.txt to yaml
  dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries
  ...

Author: torvalds

Documentation/devicetree/bindings/Makefile

@@ -28,7 +28,7 @@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
 		-name 'processed-schema*' \)
 
-find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+find_cmd = $(find_all_cmd) | sed 's|^$(srctree)/$(src)/||' | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | sed 's|^|$(srctree)/$(src)/|'
 CHK_DT_DOCS := $(shell $(find_cmd))
 
 quiet_cmd_yamllint = LINT    $(src)

Documentation/devicetree/bindings/arm/calxeda/l2ecc.yaml

@@ -16,7 +16,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "calxeda,hb-sregs-l2-ecc"
+    const: calxeda,hb-sregs-l2-ecc
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-remote-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coresight Remote ETM(Embedded Trace Macrocell)
+
+maintainers:
+  - Jinlong Mao <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+description:
+  Support for ETM trace collection on remote processor using coresight
+  framework. Enabling this will allow turning on ETM tracing on remote
+  processor like modem processor via sysfs and collecting the trace
+  via coresight TMC sinks.
+
+properties:
+  compatible:
+    const: qcom,coresight-remote-etm
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    etm {
+        compatible = "qcom,coresight-remote-etm";
+
+        out-ports {
+            port {
+                modem_etm0_out_funnel_modem: endpoint {
+                    remote-endpoint = <&funnel_modem_in_modem_etm0>;
+                };
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/arm/qcom,coresight-remote-etm.yaml

@@ -113,7 +113,7 @@ examples:
     hd44780 {
             compatible = "hit,hd44780";
             display-height-chars = <2>;
-            display-width-chars  = <16>;
+            display-width-chars = <16>;
             data-gpios = <&pcf8574 4 0>,
                          <&pcf8574 5 0>,
                          <&pcf8574 6 0>,

Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml

@@ -66,6 +66,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qdu1000-llcc
               - qcom,sc7180-llcc
               - qcom,sm6350-llcc
     then:
@@ -103,7 +104,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,qdu1000-llcc
               - qcom,sc8180x-llcc
               - qcom,sc8280xp-llcc
               - qcom,x1e80100-llcc

Documentation/devicetree/bindings/cache/qcom,llcc.yaml

@@ -125,7 +125,7 @@ examples:
     clk25m: clock-oscillator-25m {
       compatible = "fixed-clock";
       #clock-cells = <0>;
-      clock-frequency  = <25000000>;
+      clock-frequency = <25000000>;
       clock-output-names = "clk25m";
     };
 ...

Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml

@@ -243,7 +243,64 @@ description: |+
   just supports idle_standby, an idle-states node is not required.
 
   ===========================================
-  6 - References
+  6 - Qualcomm specific STATES
+  ===========================================
+
+  Idle states have different enter/exit latency and residency values.
+  The idle states supported by the QCOM SoC are defined as -
+
+    * Standby
+    * Retention
+    * Standalone Power Collapse (Standalone PC or SPC)
+    * Power Collapse (PC)
+
+  Standby: Standby does a little more in addition to architectural clock gating.
+  When the WFI instruction is executed the ARM core would gate its internal
+  clocks. In addition to gating the clocks, QCOM cpus use this instruction as a
+  trigger to execute the SPM state machine. The SPM state machine waits for the
+  interrupt to trigger the core back in to active. This triggers the cache
+  hierarchy to enter standby states, when all cpus are idle. An interrupt brings
+  the SPM state machine out of its wait, the next step is to ensure that the
+  cache hierarchy is also out of standby, and then the cpu is allowed to resume
+  execution. This state is defined as a generic ARM WFI state by the ARM cpuidle
+  driver and is not defined in the DT. The SPM state machine should be
+  configured to execute this state by default and after executing every other
+  state below.
+
+  Retention: Retention is a low power state where the core is clock gated and
+  the memory and the registers associated with the core are retained. The
+  voltage may be reduced to the minimum value needed to keep the processor
+  registers active. The SPM should be configured to execute the retention
+  sequence and would wait for interrupt, before restoring the cpu to execution
+  state. Retention may have a slightly higher latency than Standby.
+
+  Standalone PC: A cpu can power down and warmboot if there is a sufficient time
+  between the time it enters idle and the next known wake up. SPC mode is used
+  to indicate a core entering a power down state without consulting any other
+  cpu or the system resources. This helps save power only on that core.  The SPM
+  sequence for this idle state is programmed to power down the supply to the
+  core, wait for the interrupt, restore power to the core, and ensure the
+  system state including cache hierarchy is ready before allowing core to
+  resume. Applying power and resetting the core causes the core to warmboot
+  back into Elevation Level (EL) which trampolines the control back to the
+  kernel. Entering a power down state for the cpu, needs to be done by trapping
+  into a EL. Failing to do so, would result in a crash enforced by the warm boot
+  code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to
+  be flushed in s/w, before powering down the core.
+
+  Power Collapse: This state is similar to the SPC mode, but distinguishes
+  itself in that the cpu acknowledges and permits the SoC to enter deeper sleep
+  modes. In a hierarchical power domain SoC, this means L2 and other caches can
+  be flushed, system bus, clocks - lowered, and SoC main XO clock gated and
+  voltages reduced, provided all cpus enter this state.  Since the span of low
+  power modes possible at this state is vast, the exit latency and the residency
+  of this low power mode would be considered high even though at a cpu level,
+  this essentially is cpu power down. The SPM in this state also may handshake
+  with the Resource power manager (RPM) processor in the SoC to indicate a
+  complete application processor subsystem shut down.
+
+  ===========================================
+  7 - References
   ===========================================
 
   [1] ARM Linux Kernel documentation - CPUs bindings
@@ -301,9 +358,16 @@ patternProperties:
 
     properties:
       compatible:
-        enum:
-          - arm,idle-state
-          - riscv,idle-state
+        oneOf:
+          - items:
+              - enum:
+                  - qcom,idle-state-ret
+                  - qcom,idle-state-spc
+                  - qcom,idle-state-pc
+              - const: arm,idle-state
+          - enum:
+              - arm,idle-state
+              - riscv,idle-state
 
       arm,psci-suspend-param:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -852,4 +916,13 @@ examples:
         };
     };
 
+    // Example 4 - Qualcomm SPC
+    idle-states {
+      cpu_spc: cpu-spc {
+        compatible = "qcom,idle-state-spc", "arm,idle-state";
+        entry-latency-us = <150>;
+        exit-latency-us = <200>;
+        min-residency-us = <2000>;
+      };
+    };
 ...

Documentation/devicetree/bindings/cpu/idle-states.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls068b3sx02
+      - const: syna,r63353
+
+  avdd-supply: true
+  dvdd-supply: true
+  reg: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls068b3sx02", "syna,r63353";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...