Merge tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Removed Drivers:
   - Remove support for TI TPS80031/TPS80032 PMICs

  New Device Support:
   - Add support for Magnetic Reader to TI AM335x
   - Add support for DA9063_EA to Dialog DA9063
   - Add support for SC2730 PMIC to Spreadtrum SC27xx
   - Add support for MacBookPro16,2 ICL-N UART Intel LPSS PCI
   - Add support for lots of new PMICS in QCom SPMI PMIC
   - Add support for ADC to Diolan DLN2

  New Functionality:
   - Add support for Power Off to Rockchip RK817

  Fix-ups:
   - Simplify Regmap passing to child devices in hi6421-spmi-pmic
   - SPDX licensing updates in ti_am335x_tscadc
   - Improve error handling in ti_am335x_tscadc
   - Expedite clock search in ti_am335x_tscadc
   - Generic simplifications in ti_am335x_tscadc
   - Use generic macros/defines in ti_am335x_tscadc
   - Remove unused code in ti_am335x_tscadc, cros_ec_dev
   - Convert to GPIOD in wcd934x
   - Add namespacing in ti_am335x_tscadc
   - Restrict compilation to relevant arches in intel_pmt
   - Provide better description/documentation in exynos_lpass
   - Add SPI device ID table in altera-a10sr, motorola-cpcap,
     sprd-sc27xx-spi
   - Change IRQ handling in qcom-pm8xxx
   - Split out I2C and SPI code in arizona
   - Explicitly include used headers in altera-a10sr
   - Convert sysfs show() function to in sysfs_emit
   - Standardise *_exit() and *_remove() return values in mc13xxx,
     stmpe, tps65912
   - Trivial (style/spelling/whitespace) fixups in ti_am335x_tscadc,
     qcom-spmi-pmic, max77686-private
   - Device Tree fix-ups in ti,am3359-tscadc, samsung,s2mps11,
     samsung,s2mpa01, samsung,s5m8767, brcm,misc, brcm,cru, syscon,
     qcom,tcsr, xylon,logicvc, max77686, x-powers,ac100,
     x-powers,axp152, x-powers,axp209-gpio, syscon, qcom,spmi-pmic

  Bug Fixes:
   - Balance refcounting (get/put) in ti_am335x_tscadc, mfd-core
   - Fix IRQ trigger type in sec-irq, max77693, max14577
   - Repair off-by-one in altera-sysmgr
   - Add explicit 'select MFD_CORE' to MFD_SIMPLE_MFD_I2C"

* tag 'mfd-next-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (95 commits)
  mfd: simple-mfd-i2c: Select MFD_CORE to fix build error
  mfd: tps80031: Remove driver
  mfd: max77686: Correct tab-based alignment of register addresses
  mfd: wcd934x: Replace legacy gpio interface for gpiod
  dt-bindings: mfd: qcom: pm8xxx: Add pm8018 compatible
  mfd: dln2: Add cell for initializing DLN2 ADC
  mfd: qcom-spmi-pmic: Add missing PMICs supported by socinfo
  mfd: qcom-spmi-pmic: Document ten more PMICs in the binding
  mfd: qcom-spmi-pmic: Sort compatibles in the driver
  mfd: qcom-spmi-pmic: Sort the compatibles in the binding
  mfd: janz-cmoio: Replace snprintf in show functions with sysfs_emit
  mfd: altera-a10sr: Include linux/module.h
  mfd: tps65912: Make tps65912_device_exit() return void
  mfd: stmpe: Make stmpe_remove() return void
  mfd: mc13xxx: Make mc13xxx_common_exit() return void
  dt-bindings: mfd: syscon: Add samsung,exynosautov9-sysreg compatible
  mfd: altera-sysmgr: Fix a mistake caused by resource_size conversion
  dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
  dt-bindings: mfd: syscon: Add rk3368 QoS register compatible
  mfd: arizona: Split of_match table into I2C and SPI versions
  ...

Author: torvalds

Documentation/devicetree/bindings/clock/maxim,max77686.txt

@@ -49,7 +49,7 @@ Example:
 		max77686: max77686@9 {
 			compatible = "maxim,max77686";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
@@ -74,7 +74,7 @@ Example:
 		max77802: max77802@9 {
 			compatible = "maxim,max77802";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 

Documentation/devicetree/bindings/gpio/gpio-axp209.txt

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: X-Powers AXP209 GPIO Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number and the second is the GPIO flags.
+
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp209-gpio
+          - x-powers,axp813-gpio
+      - items:
+          - const: x-powers,axp803-gpio
+          - const: x-powers,axp813-gpio
+
+  gpio-controller: true
+
+patternProperties:
+  "^.*-pins?$":
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+
+    properties:
+      pins:
+        items:
+          enum:
+            - GPIO0
+            - GPIO1
+            - GPIO2
+
+      function:
+        enum:
+          - adc
+          - ldo
+          - gpio_in
+          - gpio_out
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+...

Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml

@@ -55,7 +55,7 @@ examples:
         #size-cells = <0>;
 
         axp221: pmic@68 {
-            compatible = "x-powers,axp221";
+            /* compatible = "x-powers,axp221"; */
             reg = <0x68>;
         };
     };

Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,am3359-adc
+      - ti,am4372-adc
+
+  '#io-channel-cells':
+    const: 1
+
+  ti,adc-channels:
+    description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
+      so on until AIN7 = 7.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-opendelay:
+    description: List of open delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to wait after applying the step configuration registers and before sending
+      the start of ADC conversion. Maximum value is 0x3FFFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-sampledelay:
+    description: List of sample delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to sample (to hold start of conversion high). Maximum value is 0xFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-avg:
+    description: Number of averages to be performed for each channel of ADC. If
+      average is 16 (this is also the maximum) then input is sampled 16 times
+      and averaged to get more accurate value. This increases the time taken by
+      ADC to generate a sample. Maximum value is 16.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - ti,adc-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "ti,am3359-adc";
+        #io-channel-cells = <1>;
+        ti,adc-channels = <4 5 6 7>;
+        ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
+        ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
+        ti,chan-step-avg = <16 2 4 8>;
+    };

Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };