arm64: dts: qcom: sa8775p: Add PCIe bridge node

On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge
for each controller instance. Hence, add a node to represent the bridge.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-8-1eb790c53e43@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Author: Mani-Sadhasivam

arch/arm64/boot/dts/qcom/sa8775p.dtsi

@@ -3677,6 +3677,16 @@
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie0_phy: phy@1c04000 {
@@ -3777,6 +3787,16 @@
 		phy-names = "pciephy";
 
 		status = "disabled";
+
+		pcie@0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			bus-range = <0x01 0xff>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+		};
 	};
 
 	pcie1_phy: phy@1c14000 {