Merge branch 'remotes/lorenzo/pci/dt'

- Add MT8188 and MT8195 to mediatek-gen3 DT binding (Jianjun Wang)

- Add 'clock-names' back to fu740 DT binding (Conor Dooley)

- Add 'clocks', 'clock-names', 'dma-ranges' to microchip DT binding (Conor
  Dooley)

- Add 'aggre0' and 'aggre1' clocks to qcom DT binding (Krishna chaitanya
  chundru)

* remotes/lorenzo/pci/dt:
  dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
  dt-bindings: PCI: microchip,pcie-host: fix missing dma-ranges
  dt-bindings: PCI: microchip,pcie-host: fix missing clocks properties
  dt-bindings: PCI: fu740-pci: fix missing clock-names
  dt-bindings: PCI: mediatek-gen3: Add support for MT8188 and MT8195

Author: bjorn-helgaas

Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml

@@ -48,7 +48,13 @@ allOf:
 
 properties:
   compatible:
-    const: mediatek,mt8192-pcie
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
 
   reg:
     maxItems: 1
@@ -84,7 +90,9 @@ properties:
       - const: tl_96m
       - const: tl_32k
       - const: peri_26m
-      - const: top_133m
+      - enum:
+          - top_133m        # for MT8192
+          - peri_mem        # for MT8188/MT8195
 
   assigned-clocks:
     maxItems: 1
@@ -126,6 +134,7 @@ required:
   - interrupts
   - ranges
   - clocks
+  - clock-names
   - '#interrupt-cells'
   - interrupt-controller
 

Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml

@@ -25,6 +25,33 @@ properties:
       - const: cfg
       - const: apb
 
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
   interrupts:
     minItems: 1
     items:
@@ -40,6 +67,10 @@ properties:
   ranges:
     maxItems: 1
 
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
   msi-controller:
     description: Identifies the node as an MSI controller.
 

Documentation/devicetree/bindings/pci/qcom,pcie.yaml

@@ -54,11 +54,11 @@ properties:
   # Platform constraints are described later.
   clocks:
     minItems: 3
-    maxItems: 12
+    maxItems: 13
 
   clock-names:
     minItems: 3
-    maxItems: 12
+    maxItems: 13
 
   resets:
     minItems: 1
@@ -424,8 +424,8 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 11
-          maxItems: 11
+          minItems: 13
+          maxItems: 13
         clock-names:
           items:
             - const: pipe # PIPE clock
@@ -439,6 +439,8 @@ allOf:
             - const: slave_q2a # Slave Q2A clock
             - const: tbu # PCIe TBU clock
             - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
         resets:
           maxItems: 1
         reset-names:

Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml

@@ -51,6 +51,12 @@ properties:
     description: A phandle to the PCIe power up reset line.
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
   pwren-gpios:
     description: Should specify the GPIO for controlling the PCI bus device power on.
     maxItems: 1
@@ -66,6 +72,7 @@ required:
   - interrupt-map-mask
   - interrupt-map
   - clocks
+  - clock-names
   - resets
   - pwren-gpios
   - reset-gpios
@@ -104,6 +111,7 @@ examples:
                             <0x0 0x0 0x0 0x2 &plic0 58>,
                             <0x0 0x0 0x0 0x3 &plic0 59>,
                             <0x0 0x0 0x0 0x4 &plic0 60>;
+            clock-names = "pcie_aux";
             clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
             resets = <&prci 4>;
             pwren-gpios = <&gpio 5 0>;