clk: imx: fracn-gppll: disable hardware select control

When programming PLL, should disable Hardware control select to make PLL
controlled by register, not hardware inputs through OSCPLL.

Fixes: 1b26cb8 ("clk: imx: support fracn gppll")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230403095300.3386988-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

Author: MrVan

drivers/clk/imx/clk-fracn-gppll.c

@@ -15,6 +15,7 @@
 #include "clk.h"
 
 #define PLL_CTRL		0x0
+#define HW_CTRL_SEL		BIT(16)
 #define CLKMUX_BYPASS		BIT(2)
 #define CLKMUX_EN		BIT(1)
 #define POWERUP_MASK		BIT(0)
@@ -193,6 +194,11 @@ static int clk_fracn_gppll_set_rate(struct clk_hw *hw, unsigned long drate,
 
 	rate = imx_get_pll_settings(pll, drate);
 
+	/* Hardware control select disable. PLL is control by register */
+	tmp = readl_relaxed(pll->base + PLL_CTRL);
+	tmp &= ~HW_CTRL_SEL;
+	writel_relaxed(tmp, pll->base + PLL_CTRL);
+
 	/* Disable output */
 	tmp = readl_relaxed(pll->base + PLL_CTRL);
 	tmp &= ~CLKMUX_EN;