arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada

Change all 10G port modes in Armada family device trees from
10gbase-kr to 10gbase-r

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Author: Konstantin Porotchkin

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -282,7 +282,7 @@
 &cp0_eth0 {
 	status = "okay";
 	/* Network PHY */
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy2 0>;
 

arch/arm64/boot/dts/marvell/armada-8040-db.dts

@@ -195,7 +195,7 @@
 
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 
 	fixed-link {
 		speed = <10000>;
@@ -348,7 +348,7 @@
 
 &cp1_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 
 	fixed-link {
 		speed = <10000>;

arch/arm64/boot/dts/marvell/cn9130-crb.dtsi

@@ -202,7 +202,7 @@
 &cp0_eth0 {
 	/* This port is connected to 88E6393X switch */
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	managed = "in-band-status";
 	phys = <&cp0_comphy4 0>;
 };

arch/arm64/boot/dts/marvell/cn9130-db.dtsi

@@ -126,7 +126,7 @@
 /* SLM-1521-V2, CON9 */
 &cp0_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp0_comphy4 0>;
 	managed = "in-band-status";

arch/arm64/boot/dts/marvell/cn9131-db.dtsi

@@ -85,7 +85,7 @@
 /* CON50 */
 &cp1_eth0 {
 	status = "okay";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp1_comphy4 0>;
 	managed = "in-band-status";

arch/arm64/boot/dts/marvell/cn9132-db.dtsi

@@ -103,7 +103,7 @@
 /* SLM-1521-V2, CON9 */
 &cp2_eth0 {
 	status = "disabled";
-	phy-mode = "10gbase-kr";
+	phy-mode = "10gbase-r";
 	/* Generic PHY, providing serdes lanes */
 	phys = <&cp2_comphy4 0>;
 	managed = "in-band-status";