Merge tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull mtd fixes from Miquel Raynal:
 "Many NAND page layouts have been added to the Marvell NAND controller
  but could not be used in practice so they are being removed.

  Regarding the SPI-NAND area, Gigadevice chips were not using the right
  buffer for an ECC status check operation.

  Aside from these driver fixes, there is also a refcount fix in the MTD
  core nodes parsing logic"

* tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: marvell: fix layouts
  mtd: Fix possible refcounting issue when going through partition nodes
  mtd: spinand: gigadevice: Fix the get ecc status issue

Author: torvalds

drivers/mtd/mtdcore.c

@@ -621,6 +621,7 @@ static void mtd_check_of_node(struct mtd_info *mtd)
 		if (plen == mtd_name_len &&
 		    !strncmp(mtd->name, pname + offset, plen)) {
 			mtd_set_of_node(mtd, mtd_dn);
+			of_node_put(mtd_dn);
 			break;
 		}
 	}

drivers/mtd/nand/raw/marvell_nand.c

@@ -290,16 +290,13 @@ static const struct marvell_hw_ecc_layout marvell_nfc_layouts[] = {
 	MARVELL_LAYOUT( 2048,   512,  4,  1,  1, 2048, 32, 30,  0,  0,  0),
 	MARVELL_LAYOUT( 2048,   512,  8,  2,  1, 1024,  0, 30,1024,32, 30),
 	MARVELL_LAYOUT( 2048,   512,  8,  2,  1, 1024,  0, 30,1024,64, 30),
-	MARVELL_LAYOUT( 2048,   512,  12, 3,  2, 704,   0, 30,640,  0, 30),
-	MARVELL_LAYOUT( 2048,   512,  16, 5,  4, 512,   0, 30,  0, 32, 30),
+	MARVELL_LAYOUT( 2048,   512,  16, 4,  4, 512,   0, 30,  0, 32, 30),
 	MARVELL_LAYOUT( 4096,   512,  4,  2,  2, 2048, 32, 30,  0,  0,  0),
-	MARVELL_LAYOUT( 4096,   512,  8,  5,  4, 1024,  0, 30,  0, 64, 30),
-	MARVELL_LAYOUT( 4096,   512,  12, 6,  5, 704,   0, 30,576, 32, 30),
-	MARVELL_LAYOUT( 4096,   512,  16, 9,  8, 512,   0, 30,  0, 32, 30),
+	MARVELL_LAYOUT( 4096,   512,  8,  4,  4, 1024,  0, 30,  0, 64, 30),
+	MARVELL_LAYOUT( 4096,   512,  16, 8,  8, 512,   0, 30,  0, 32, 30),
 	MARVELL_LAYOUT( 8192,   512,  4,  4,  4, 2048,  0, 30,  0,  0,  0),
-	MARVELL_LAYOUT( 8192,   512,  8,  9,  8, 1024,  0, 30,  0, 160, 30),
-	MARVELL_LAYOUT( 8192,   512,  12, 12, 11, 704,  0, 30,448,  64, 30),
-	MARVELL_LAYOUT( 8192,   512,  16, 17, 16, 512,  0, 30,  0,  32, 30),
+	MARVELL_LAYOUT( 8192,   512,  8,  8,  8, 1024,  0, 30,  0, 160, 30),
+	MARVELL_LAYOUT( 8192,   512,  16, 16, 16, 512,  0, 30,  0,  32, 30),
 };
 
 /**

drivers/mtd/nand/spi/gigadevice.c

@@ -186,7 +186,7 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 {
 	u8 status2;
 	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
-						      &status2);
+						      spinand->scratchbuf);
 	int ret;
 
 	switch (status & STATUS_ECC_MASK) {
@@ -207,6 +207,7 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 		 * report the maximum of 4 in this case
 		 */
 		/* bits sorted this way (3...0): ECCS1,ECCS0,ECCSE1,ECCSE0 */
+		status2 = *(spinand->scratchbuf);
 		return ((status & STATUS_ECC_MASK) >> 2) |
 			((status2 & STATUS_ECC_MASK) >> 4);
 
@@ -228,7 +229,7 @@ static int gd5fxgq5xexxg_ecc_get_status(struct spinand_device *spinand,
 {
 	u8 status2;
 	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
-						      &status2);
+						      spinand->scratchbuf);
 	int ret;
 
 	switch (status & STATUS_ECC_MASK) {
@@ -248,6 +249,7 @@ static int gd5fxgq5xexxg_ecc_get_status(struct spinand_device *spinand,
 		 * 1 ... 4 bits are flipped (and corrected)
 		 */
 		/* bits sorted this way (1...0): ECCSE1, ECCSE0 */
+		status2 = *(spinand->scratchbuf);
 		return ((status2 & STATUS_ECC_MASK) >> 4) + 1;
 
 	case STATUS_ECC_UNCOR_ERROR: