ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports

When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).

While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
   not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link

This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.

Fixes: ba4aebc ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>

Author: Rafał Miłecki

arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi

@@ -181,5 +181,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts

@@ -85,5 +85,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts

@@ -88,5 +88,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts

@@ -122,5 +122,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts

@@ -145,6 +145,14 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 

arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts

@@ -145,5 +145,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts

@@ -81,5 +81,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts

@@ -148,5 +148,13 @@
 		port@5 {
 			label = "cpu";
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts

@@ -227,6 +227,14 @@
 			label = "wan";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};

arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts

@@ -160,6 +160,14 @@
 			nvmem-cell-names = "mac-address";
 		};
 
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
 		port@8 {
 			label = "cpu";
 		};