Merge tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.6:

- A couple of i.MX8MP device tree changes from Adam Ford to fix clock
  configuration regressions caused by 16c9845 ("arm64: dts: imx8mp:
  don't initialize audio clocks from CCM node").
- Fix pmic-irq-hog GPIO line in imx93-tqma9352 device tree.
- Fix a mmemory leak with error handling path of imx_dsp_setup_channels()
  in imx-dsp driver.
- Fix HDMI node in imx8mm-evk device tree.
- Add missing clock enable functionality for imx8mm_soc_uid() function
  in soc-imx8m driver.
- Add missing imx8mm-prt8mm.dtb build target.

* tag 'imx-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
  arm64: dts: imx8mm-evk: Fix hdmi@3d node
  soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
  arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
  arm64: dts: imx8mp: Fix SDMA2/3 clocks
  arm64: dts: freescale: tqma9352: Fix gpio hog
  firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()

Link: https://lore.kernel.org/r/20230926123710.GT7231@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: arndb

arch/arm64/boot/dts/freescale/Makefile

@@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-prt8mm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb

arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi

@@ -26,7 +26,7 @@
 
 		port {
 			hdmi_connector_in: endpoint {
-				remote-endpoint = <&adv7533_out>;
+				remote-endpoint = <&adv7535_out>;
 			};
 		};
 	};
@@ -72,6 +72,13 @@
 		enable-active-high;
 	};
 
+	reg_vddext_3v3: regulator-vddext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDEXT_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
@@ -317,15 +324,16 @@
 
 	hdmi@3d {
 		compatible = "adi,adv7535";
-		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
-		reg-names = "main", "cec", "edid", "packet";
+		reg = <0x3d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-		adi,input-style = <1>;
-		adi,input-justification = "evenly";
+		avdd-supply = <&buck5_reg>;
+		dvdd-supply = <&buck5_reg>;
+		pvdd-supply = <&buck5_reg>;
+		a2vdd-supply = <&buck5_reg>;
+		v3p3-supply = <&reg_vddext_3v3>;
+		v1p2-supply = <&buck5_reg>;
 
 		ports {
 			#address-cells = <1>;
@@ -334,15 +342,15 @@
 			port@0 {
 				reg = <0>;
 
-				adv7533_in: endpoint {
+				adv7535_in: endpoint {
 					remote-endpoint = <&dsi_out>;
 				};
 			};
 
 			port@1 {
 				reg = <1>;
 
-				adv7533_out: endpoint {
+				adv7535_out: endpoint {
 					remote-endpoint = <&hdmi_connector_in>;
 				};
 			};
@@ -448,7 +456,7 @@
 			reg = <1>;
 
 			dsi_out: endpoint {
-				remote-endpoint = <&adv7533_in>;
+				remote-endpoint = <&adv7535_in>;
 				data-lanes = <1 2 3 4>;
 			};
 		};

arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts

@@ -381,9 +381,10 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>,
+			  <&clk IMX8MP_AUDIO_PLL2> ;
 	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL2_OUT>;
-	assigned-clock-rates = <12288000>;
+	assigned-clock-rates = <12288000>, <361267200>;
 	fsl,sai-mclk-direction-output;
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -790,6 +790,12 @@
 						reg = <IMX8MP_POWER_DOMAIN_AUDIOMIX>;
 						clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
 							 <&clk IMX8MP_CLK_AUDIO_AXI>;
+						assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>,
+								  <&clk IMX8MP_CLK_AUDIO_AXI_SRC>;
+						assigned-clock-parents =  <&clk IMX8MP_SYS_PLL1_800M>,
+									  <&clk IMX8MP_SYS_PLL1_800M>;
+						assigned-clock-rates = <400000000>,
+								       <600000000>;
 					};
 
 					pgc_gpu2d: power-domain@6 {

arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi

@@ -81,7 +81,7 @@
 &gpio1 {
 	pmic-irq-hog {
 		gpio-hog;
-		gpios = <2 GPIO_ACTIVE_LOW>;
+		gpios = <3 GPIO_ACTIVE_LOW>;
 		input;
 		line-name = "PMIC_IRQ#";
 	};

drivers/firmware/imx/imx-dsp.c

@@ -114,6 +114,7 @@ static int imx_dsp_setup_channels(struct imx_dsp_ipc *dsp_ipc)
 		dsp_chan->idx = i % 2;
 		dsp_chan->ch = mbox_request_channel_byname(cl, chan_name);
 		if (IS_ERR(dsp_chan->ch)) {
+			kfree(dsp_chan->name);
 			ret = PTR_ERR(dsp_chan->ch);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to request mbox chan %s ret %d\n",

drivers/soc/imx/soc-imx8m.c

@@ -100,6 +100,7 @@ static void __init imx8mm_soc_uid(void)
 {
 	void __iomem *ocotp_base;
 	struct device_node *np;
+	struct clk *clk;
 	u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
 		     IMX8MP_OCOTP_UID_OFFSET : 0;
 
@@ -109,11 +110,20 @@ static void __init imx8mm_soc_uid(void)
 
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
+	clk = of_clk_get_by_name(np, NULL);
+	if (IS_ERR(clk)) {
+		WARN_ON(IS_ERR(clk));
+		return;
+	}
+
+	clk_prepare_enable(clk);
 
 	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
 	soc_uid <<= 32;
 	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
 
+	clk_disable_unprepare(clk);
+	clk_put(clk);
 	iounmap(ocotp_base);
 	of_node_put(np);
 }