net: ethernet: mtk_eth_soc: net: revise NETSYSv3 hardware configuration

Change hardware configuration for the NETSYSv3.
 - Enable PSE dummy page mechanism for the GDM1/2/3
 - Enable PSE drop mechanism when the WDMA Rx ring full
 - Enable PSE no-drop mechanism for packets from the WDMA Tx
 - Correct PSE free drop threshold
 - Correct PSE CDMA high threshold

Fixes: 1953f13 ("net: ethernet: mtk_eth_soc: add NETSYS_V3 version support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b71f8fd9d4bb69c646c4d558f9331dd965068606.1744907886.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Author: bcchen28411

drivers/net/ethernet/mediatek/mtk_eth_soc.c

@@ -4043,11 +4043,27 @@ static int mtk_hw_init(struct mtk_eth *eth, bool reset)
 	mtk_w32(eth, 0x21021000, MTK_FE_INT_GRP);
 
 	if (mtk_is_netsys_v3_or_greater(eth)) {
-		/* PSE should not drop port1, port8 and port9 packets */
-		mtk_w32(eth, 0x00000302, PSE_DROP_CFG);
+		/* PSE dummy page mechanism */
+		mtk_w32(eth, PSE_DUMMY_WORK_GDM(1) | PSE_DUMMY_WORK_GDM(2) |
+			PSE_DUMMY_WORK_GDM(3) | DUMMY_PAGE_THR, PSE_DUMY_REQ);
+
+		/* PSE free buffer drop threshold */
+		mtk_w32(eth, 0x00600009, PSE_IQ_REV(8));
+
+		/* PSE should not drop port8, port9 and port13 packets from
+		 * WDMA Tx
+		 */
+		mtk_w32(eth, 0x00002300, PSE_DROP_CFG);
+
+		/* PSE should drop packets to port8, port9 and port13 on WDMA Rx
+		 * ring full
+		 */
+		mtk_w32(eth, 0x00002300, PSE_PPE_DROP(0));
+		mtk_w32(eth, 0x00002300, PSE_PPE_DROP(1));
+		mtk_w32(eth, 0x00002300, PSE_PPE_DROP(2));
 
 		/* GDM and CDM Threshold */
-		mtk_w32(eth, 0x00000707, MTK_CDMW0_THRES);
+		mtk_w32(eth, 0x08000707, MTK_CDMW0_THRES);
 		mtk_w32(eth, 0x00000077, MTK_CDMW1_THRES);
 
 		/* Disable GDM1 RX CRC stripping */
@@ -4064,7 +4080,7 @@ static int mtk_hw_init(struct mtk_eth *eth, bool reset)
 		mtk_w32(eth, 0x00000300, PSE_DROP_CFG);
 
 		/* PSE should drop packets to port 8/9 on WDMA Rx ring full */
-		mtk_w32(eth, 0x00000300, PSE_PPE0_DROP);
+		mtk_w32(eth, 0x00000300, PSE_PPE_DROP(0));
 
 		/* PSE Free Queue Flow Control  */
 		mtk_w32(eth, 0x01fa01f4, PSE_FQFC_CFG2);

drivers/net/ethernet/mediatek/mtk_eth_soc.h

@@ -151,7 +151,15 @@
 #define PSE_FQFC_CFG1		0x100
 #define PSE_FQFC_CFG2		0x104
 #define PSE_DROP_CFG		0x108
-#define PSE_PPE0_DROP		0x110
+#define PSE_PPE_DROP(x)		(0x110 + ((x) * 0x4))
+
+/* PSE Last FreeQ Page Request Control */
+#define PSE_DUMY_REQ		0x10C
+/* PSE_DUMY_REQ is not a typo but actually called like that also in
+ * MediaTek's datasheet
+ */
+#define PSE_DUMMY_WORK_GDM(x)	BIT(16 + (x))
+#define DUMMY_PAGE_THR		0x1
 
 /* PSE Input Queue Reservation Register*/
 #define PSE_IQ_REV(x)		(0x140 + (((x) - 1) << 2))