Merge tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - support for NCT6116D

 - several small fixes and improvements

* tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits)
  watchdog: jz4740: Drop dependency on MACH_JZ47xx
  watchdog: jz4740: Use regmap provided by TCU driver
  watchdog: jz4740: Use WDT clock provided by TCU driver
  dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible
  watchdog: sama5d4_wdt: cleanup the bit definitions
  watchdog: sprd: Fix the incorrect pointer getting from driver data
  watchdog: aspeed: Fix clock behaviour for ast2600
  watchdog: imx7ulp: Fix reboot hang
  watchdog: make nowayout sysfs file writable
  watchdog: prevent deferral of watchdogd wakeup on RT
  watchdog: imx7ulp: Use definitions instead of magic values
  watchdog: imx7ulp: Remove inline annotations
  watchdog: imx7ulp: Remove unused structure member
  watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()
  watchdog: wdat_wdt: Spelling s/configrable/configurable/
  watchdog: bd70528: Trivial function documentation fix
  watchdog: cadence: Do not show error in case of deferred probe
  watchdog: Fix the race between the release of watchdog_core_data and cdev
  watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning
  watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-class-watchdog

@@ -17,8 +17,13 @@ What:		/sys/class/watchdog/watchdogn/nowayout
 Date:		August 2015
 Contact:	Wim Van Sebroeck <wim@iguana.be>
 Description:
-		It is a read only file. While reading, it gives '1' if that
-		device supports nowayout feature else, it gives '0'.
+		It is a read/write file. While reading, it gives '1'
+		if the device has the nowayout feature set, otherwise
+		it gives '0'. Writing a '1' to the file enables the
+		nowayout feature. Once set, the nowayout feature
+		cannot be disabled, so writing a '0' either has no
+		effect (if the feature was already disabled) or
+		results in a permission error.
 
 What:		/sys/class/watchdog/watchdogn/state
 Date:		August 2015

Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

@@ -1,7 +1,7 @@
 * Atmel SAMA5D4 Watchdog Timer (WDT) Controller
 
 Required properties:
-- compatible: "atmel,sama5d4-wdt"
+- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
 - reg: base physical address and length of memory mapped region.
 
 Optional properties:

drivers/watchdog/Kconfig

@@ -1485,6 +1485,7 @@ config W83627HF_WDT
 		NCT6791
 		NCT6792
 		NCT6102D/04D/06D
+		NCT6116D
 
 	  This watchdog simply watches your kernel to make sure it doesn't
 	  freeze, and if it does, it reboots your computer after a certain
@@ -1641,8 +1642,10 @@ config INDYDOG
 
 config JZ4740_WDT
 	tristate "Ingenic jz4740 SoC hardware watchdog"
-	depends on MACH_JZ4740 || MACH_JZ4780
+	depends on MIPS
+	depends on COMMON_CLK
 	select WATCHDOG_CORE
+	select MFD_SYSCON
 	help
 	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
 

drivers/watchdog/aspeed_wdt.c

@@ -258,11 +258,6 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	/*
-	 * The ast2400 wdt can run at PCLK, or 1MHz. The ast2500 only
-	 * runs at 1MHz. We chose to always run at 1MHz, as there's no
-	 * good reason to have a faster watchdog counter.
-	 */
 	wdt->wdd.info = &aspeed_wdt_info;
 	wdt->wdd.ops = &aspeed_wdt_ops;
 	wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
@@ -278,7 +273,16 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 		return -EINVAL;
 	config = ofdid->data;
 
-	wdt->ctrl = WDT_CTRL_1MHZ_CLK;
+	/*
+	 * On clock rates:
+	 *  - ast2400 wdt can run at PCLK, or 1MHz
+	 *  - ast2500 only runs at 1MHz, hard coding bit 4 to 1
+	 *  - ast2600 always runs at 1MHz
+	 *
+	 * Set the ast2400 to run at 1MHz as it simplifies the driver.
+	 */
+	if (of_device_is_compatible(np, "aspeed,ast2400-wdt"))
+		wdt->ctrl = WDT_CTRL_1MHZ_CLK;
 
 	/*
 	 * Control reset on a per-device basis to ensure the

drivers/watchdog/at91sam9_wdt.h

@@ -4,33 +4,37 @@
  *
  * Copyright (C) 2007 Andrew Victor
  * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
  *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
+ * Based on SAM9X60 datasheet.
  *
  */
 
 #ifndef AT91_WDT_H
 #define AT91_WDT_H
 
+#include <linux/bits.h>
+
 #define AT91_WDT_CR		0x00			/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+#define  AT91_WDT_WDRSTT	BIT(0)			/* Restart */
+#define  AT91_WDT_KEY		(0xa5UL << 24)		/* KEY Password */
 
 #define AT91_WDT_MR		0x04			/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define			AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define			AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+#define  AT91_WDT_WDV		(0xfffUL << 0)		/* Counter Value */
+#define  AT91_WDT_SET_WDV(x)	((x) & AT91_WDT_WDV)
+#define  AT91_WDT_WDFIEN	BIT(12)		/* Fault Interrupt Enable */
+#define  AT91_WDT_WDRSTEN	BIT(13)		/* Reset Processor */
+#define  AT91_WDT_WDRPROC	BIT(14)		/* Timer Restart */
+#define  AT91_WDT_WDDIS		BIT(15)		/* Watchdog Disable */
+#define  AT91_WDT_WDD		(0xfffUL << 16)		/* Delta Value */
+#define  AT91_WDT_SET_WDD(x)	(((x) << 16) & AT91_WDT_WDD)
+#define  AT91_WDT_WDDBGHLT	BIT(28)		/* Debug Halt */
+#define  AT91_WDT_WDIDLEHLT	BIT(29)		/* Idle Halt */
 
-#define AT91_WDT_SR		0x08			/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+#define AT91_WDT_SR		0x08		/* Watchdog Status Register */
+#define  AT91_WDT_WDUNF		BIT(0)		/* Watchdog Underflow */
+#define  AT91_WDT_WDERR		BIT(1)		/* Watchdog Error */
 
 #endif

drivers/watchdog/bd70528_wdt.c

@@ -97,7 +97,7 @@ EXPORT_SYMBOL(bd70528_wdt_set);
 /**
  * bd70528_wdt_lock - take WDT lock
  *
- * @bd70528:	device data for the PMIC instance we want to operate on
+ * @data:	device data for the PMIC instance we want to operate on
  *
  * Lock WDT for arming/disarming in order to avoid race condition caused
  * by WDT state changes initiated by WDT and RTC drivers.
@@ -114,7 +114,7 @@ EXPORT_SYMBOL(bd70528_wdt_lock);
 /**
  * bd70528_wdt_unlock - unlock WDT lock
  *
- * @bd70528:	device data for the PMIC instance we want to operate on
+ * @data:	device data for the PMIC instance we want to operate on
  *
  * Unlock WDT lock which has previously been taken by call to
  * bd70528_wdt_lock.

drivers/watchdog/cadence_wdt.c

@@ -335,8 +335,10 @@ static int cdns_wdt_probe(struct platform_device *pdev)
 
 	wdt->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(wdt->clk)) {
-		dev_err(dev, "input clock not found\n");
-		return PTR_ERR(wdt->clk);
+		ret = PTR_ERR(wdt->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "input clock not found\n");
+		return ret;
 	}
 
 	ret = clk_prepare_enable(wdt->clk);

drivers/watchdog/imx2_wdt.c

@@ -72,7 +72,6 @@ module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
-
 static unsigned timeout;
 module_param(timeout, uint, 0);
 MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default="
@@ -247,30 +246,31 @@ static const struct regmap_config imx2_wdt_regmap_config = {
 
 static int __init imx2_wdt_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct imx2_wdt_device *wdev;
 	struct watchdog_device *wdog;
 	void __iomem *base;
 	int ret;
 	u32 val;
 
-	wdev = devm_kzalloc(&pdev->dev, sizeof(*wdev), GFP_KERNEL);
+	wdev = devm_kzalloc(dev, sizeof(*wdev), GFP_KERNEL);
 	if (!wdev)
 		return -ENOMEM;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
-	wdev->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+	wdev->regmap = devm_regmap_init_mmio_clk(dev, NULL, base,
 						 &imx2_wdt_regmap_config);
 	if (IS_ERR(wdev->regmap)) {
-		dev_err(&pdev->dev, "regmap init failed\n");
+		dev_err(dev, "regmap init failed\n");
 		return PTR_ERR(wdev->regmap);
 	}
 
-	wdev->clk = devm_clk_get(&pdev->dev, NULL);
+	wdev->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(wdev->clk)) {
-		dev_err(&pdev->dev, "can't get Watchdog clock\n");
+		dev_err(dev, "can't get Watchdog clock\n");
 		return PTR_ERR(wdev->clk);
 	}
 
@@ -280,12 +280,12 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	wdog->min_timeout	= 1;
 	wdog->timeout		= IMX2_WDT_DEFAULT_TIME;
 	wdog->max_hw_heartbeat_ms = IMX2_WDT_MAX_TIME * 1000;
-	wdog->parent		= &pdev->dev;
+	wdog->parent		= dev;
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret > 0)
-		if (!devm_request_irq(&pdev->dev, ret, imx2_wdt_isr, 0,
-				      dev_name(&pdev->dev), wdog))
+		if (!devm_request_irq(dev, ret, imx2_wdt_isr, 0,
+				      dev_name(dev), wdog))
 			wdog->info = &imx2_wdt_pretimeout_info;
 
 	ret = clk_prepare_enable(wdev->clk);
@@ -295,13 +295,13 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val);
 	wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0;
 
-	wdev->ext_reset = of_property_read_bool(pdev->dev.of_node,
+	wdev->ext_reset = of_property_read_bool(dev->of_node,
 						"fsl,ext-reset-output");
 	platform_set_drvdata(pdev, wdog);
 	watchdog_set_drvdata(wdog, wdev);
 	watchdog_set_nowayout(wdog, nowayout);
 	watchdog_set_restart_priority(wdog, 128);
-	watchdog_init_timeout(wdog, timeout, &pdev->dev);
+	watchdog_init_timeout(wdog, timeout, dev);
 
 	if (imx2_wdt_is_running(wdev)) {
 		imx2_wdt_set_timeout(wdog, wdog->timeout);
@@ -319,7 +319,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_clk;
 
-	dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n",
+	dev_info(dev, "timeout %d sec (nowayout=%d)\n",
 		 wdog->timeout, nowayout);
 
 	return 0;
@@ -359,9 +359,8 @@ static void imx2_wdt_shutdown(struct platform_device *pdev)
 	}
 }
 
-#ifdef CONFIG_PM_SLEEP
 /* Disable watchdog if it is active or non-active but still running */
-static int imx2_wdt_suspend(struct device *dev)
+static int __maybe_unused imx2_wdt_suspend(struct device *dev)
 {
 	struct watchdog_device *wdog = dev_get_drvdata(dev);
 	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
@@ -382,7 +381,7 @@ static int imx2_wdt_suspend(struct device *dev)
 }
 
 /* Enable watchdog and configure it if necessary */
-static int imx2_wdt_resume(struct device *dev)
+static int __maybe_unused imx2_wdt_resume(struct device *dev)
 {
 	struct watchdog_device *wdog = dev_get_drvdata(dev);
 	struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
@@ -407,7 +406,6 @@ static int imx2_wdt_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(imx2_wdt_pm_ops, imx2_wdt_suspend,
 			 imx2_wdt_resume);

drivers/watchdog/imx7ulp_wdt.c

@@ -17,6 +17,9 @@
 #define WDOG_CS_CMD32EN		BIT(13)
 #define WDOG_CS_ULK		BIT(11)
 #define WDOG_CS_RCS		BIT(10)
+#define LPO_CLK			0x1
+#define LPO_CLK_SHIFT		8
+#define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
 #define WDOG_CS_EN		BIT(7)
 #define WDOG_CS_UPDATE		BIT(5)
 
@@ -41,24 +44,25 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
 struct imx7ulp_wdt_device {
-	struct notifier_block restart_handler;
 	struct watchdog_device wdd;
 	void __iomem *base;
 	struct clk *clk;
 };
 
-static inline void imx7ulp_wdt_enable(void __iomem *base, bool enable)
+static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
 {
-	u32 val = readl(base + WDOG_CS);
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
-	writel(UNLOCK, base + WDOG_CNT);
+	u32 val = readl(wdt->base + WDOG_CS);
+
+	writel(UNLOCK, wdt->base + WDOG_CNT);
 	if (enable)
-		writel(val | WDOG_CS_EN, base + WDOG_CS);
+		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
 	else
-		writel(val & ~WDOG_CS_EN, base + WDOG_CS);
+		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
 }
 
-static inline bool imx7ulp_wdt_is_enabled(void __iomem *base)
+static bool imx7ulp_wdt_is_enabled(void __iomem *base)
 {
 	u32 val = readl(base + WDOG_CS);
 
@@ -76,18 +80,15 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
 
 static int imx7ulp_wdt_start(struct watchdog_device *wdog)
 {
-	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
-	imx7ulp_wdt_enable(wdt->base, true);
+	imx7ulp_wdt_enable(wdog, true);
 
 	return 0;
 }
 
 static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
 {
-	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
-
-	imx7ulp_wdt_enable(wdt->base, false);
+	imx7ulp_wdt_enable(wdog, false);
 
 	return 0;
 }
@@ -106,12 +107,28 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
 	return 0;
 }
 
+static int imx7ulp_wdt_restart(struct watchdog_device *wdog,
+			       unsigned long action, void *data)
+{
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+
+	imx7ulp_wdt_enable(wdt->base, true);
+	imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
+
+	/* wait for wdog to fire */
+	while (true)
+		;
+
+	return NOTIFY_DONE;
+}
+
 static const struct watchdog_ops imx7ulp_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = imx7ulp_wdt_start,
 	.stop  = imx7ulp_wdt_stop,
 	.ping  = imx7ulp_wdt_ping,
 	.set_timeout = imx7ulp_wdt_set_timeout,
+	.restart = imx7ulp_wdt_restart,
 };
 
 static const struct watchdog_info imx7ulp_wdt_info = {
@@ -120,7 +137,7 @@ static const struct watchdog_info imx7ulp_wdt_info = {
 		    WDIOF_MAGICCLOSE,
 };
 
-static inline void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
+static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 {
 	u32 val;
 
@@ -131,7 +148,7 @@ static inline void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
-	val = BIT(13) | BIT(8) | BIT(5);
+	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
 	writel(val, base + WDOG_CS);
 }
 

drivers/watchdog/intel-mid_wdt.c

@@ -134,6 +134,7 @@ static int mid_wdt_probe(struct platform_device *pdev)
 	wdt_dev->timeout = MID_WDT_DEFAULT_TIMEOUT;
 	wdt_dev->parent = dev;
 
+	watchdog_set_nowayout(wdt_dev, WATCHDOG_NOWAYOUT);
 	watchdog_set_drvdata(wdt_dev, dev);
 
 	ret = devm_request_irq(dev, pdata->irq, mid_wdt_irq,