Merge tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Two driver bugfixes and a typo fix"

* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Change large transfer count reset logic to be unconditional
  i2c: imx: fix typo in comment
  i2c: mlxcpld: Fix register setting for 400KHz frequency

Author: torvalds

drivers/i2c/busses/i2c-cadence.c

@@ -388,9 +388,9 @@ static irqreturn_t cdns_i2c_slave_isr(void *ptr)
  */
 static irqreturn_t cdns_i2c_master_isr(void *ptr)
 {
-	unsigned int isr_status, avail_bytes, updatetx;
+	unsigned int isr_status, avail_bytes;
 	unsigned int bytes_to_send;
-	bool hold_quirk;
+	bool updatetx;
 	struct cdns_i2c *id = ptr;
 	/* Signal completion only after everything is updated */
 	int done_flag = 0;
@@ -410,11 +410,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 	 * Check if transfer size register needs to be updated again for a
 	 * large data receive operation.
 	 */
-	updatetx = 0;
-	if (id->recv_count > id->curr_recv_count)
-		updatetx = 1;
-
-	hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
+	updatetx = id->recv_count > id->curr_recv_count;
 
 	/* When receiving, handle data interrupt and completion interrupt */
 	if (id->p_recv_buf &&
@@ -445,7 +441,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 				break;
 			}
 
-			if (cdns_is_holdquirk(id, hold_quirk))
+			if (cdns_is_holdquirk(id, updatetx))
 				break;
 		}
 
@@ -456,7 +452,7 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 		 * maintain transfer size non-zero while performing a large
 		 * receive operation.
 		 */
-		if (cdns_is_holdquirk(id, hold_quirk)) {
+		if (cdns_is_holdquirk(id, updatetx)) {
 			/* wait while fifo is full */
 			while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
 			       (id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
@@ -478,22 +474,6 @@ static irqreturn_t cdns_i2c_master_isr(void *ptr)
 						  CDNS_I2C_XFER_SIZE_OFFSET);
 				id->curr_recv_count = id->recv_count;
 			}
-		} else if (id->recv_count && !hold_quirk &&
-						!id->curr_recv_count) {
-
-			/* Set the slave address in address register*/
-			cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
-						CDNS_I2C_ADDR_OFFSET);
-
-			if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
-				cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
-						CDNS_I2C_XFER_SIZE_OFFSET);
-				id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
-			} else {
-				cdns_i2c_writereg(id->recv_count,
-						CDNS_I2C_XFER_SIZE_OFFSET);
-				id->curr_recv_count = id->recv_count;
-			}
 		}
 
 		/* Clear hold (if not repeated start) and signal completion */

drivers/i2c/busses/i2c-imx.c

@@ -66,7 +66,7 @@
 
 /* IMX I2C registers:
  * the I2C register offset is different between SoCs,
- * to provid support for all these chips, split the
+ * to provide support for all these chips, split the
  * register offset into a fixed base address and a
  * variable shift value, then the full register offset
  * will be calculated by

drivers/i2c/busses/i2c-mlxcpld.c

@@ -49,7 +49,7 @@
 #define MLXCPLD_LPCI2C_NACK_IND		2
 
 #define MLXCPLD_I2C_FREQ_1000KHZ_SET	0x04
-#define MLXCPLD_I2C_FREQ_400KHZ_SET	0x0c
+#define MLXCPLD_I2C_FREQ_400KHZ_SET	0x0e
 #define MLXCPLD_I2C_FREQ_100KHZ_SET	0x42
 
 enum mlxcpld_i2c_frequency {