ARM: dts: at91: use generic node name for dataflash

The node names should be generic, so use "flash" for dataflash nodes and
for cfi-flash.

Suggested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220412105013.249793-1-krzysztof.kozlowski@linaro.org

Author: krzk

Documentation/devicetree/bindings/mfd/atmel-flexcom.txt

@@ -54,7 +54,7 @@ flexcom@f8034000 {
 		clock-names = "spi_clk";
 		atmel,fifo-size = <32>;
 
-		mtd_dataflash@0 {
+		flash@0 {
 			compatible = "atmel,at25f512b";
 			reg = <0>;
 			spi-max-frequency = <20000000>;

arch/arm/boot/dts/at91rm9200ek.dts

@@ -73,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -94,7 +94,7 @@
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";

arch/arm/boot/dts/at91sam9260ek.dts

@@ -92,7 +92,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;

arch/arm/boot/dts/at91sam9261ek.dts

@@ -145,7 +145,7 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;

arch/arm/boot/dts/at91sam9263ek.dts

@@ -95,7 +95,7 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -110,7 +110,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -167,7 +167,7 @@
 			spi0: spi@fffa4000{
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;

arch/arm/boot/dts/at91sam9rlek.dts

@@ -180,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;

arch/arm/boot/dts/usb_a9263.dts

@@ -60,7 +60,7 @@
 			spi0: spi@fffa4000 {
 				cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
 				status = "okay";
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;