Merge tag 'usb-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are some small bugfixes and new device ids for USB and
  Thunderbolt drivers for 6.7-rc7. Included in here are:

   - new usb-serial device ids

   - thunderbolt driver fixes

   - typec driver fix

   - usb-storage driver quirk added

   - fotg210 driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Quectel EG912Y module support
  USB: serial: ftdi_sio: update Actisense PIDs constant names
  usb: fotg210-hcd: delete an incorrect bounds test
  usb-storage: Add quirk for incorrect WP on Kingston DT Ultimate 3.0 G3
  usb: typec: ucsi: fix gpio-based orientation detection
  net: usb: ax88179_178a: avoid failed operations when device is disconnected
  USB: serial: option: add Quectel RM500Q R13 firmware support
  USB: serial: option: add Foxconn T99W265 with new baseline
  thunderbolt: Fix minimum allocated USB 3.x and PCIe bandwidth
  thunderbolt: Fix memory leak in margining_port_remove()

Author: torvalds

drivers/net/usb/ax88179_178a.c

@@ -173,6 +173,7 @@ struct ax88179_data {
 	u8 in_pm;
 	u32 wol_supported;
 	u32 wolopts;
+	u8 disconnecting;
 };
 
 struct ax88179_int_data {
@@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
 		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 {
 	int ret;
 	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
 
 	BUG_ON(!dev);
 
@@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 value, index, data, size);
 
-	if (unlikely(ret < 0))
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
 		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
 			    index, ret);
 
@@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf)
 	return usbnet_resume(intf);
 }
 
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+
+	if (!dev)
+		return;
+
+	ax179_data = dev->driver_priv;
+	ax179_data->disconnecting = 1;
+
+	usbnet_disconnect(intf);
+}
+
 static void
 ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
@@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.suspend =	ax88179_suspend,
 	.resume =	ax88179_resume,
 	.reset_resume =	ax88179_resume,
-	.disconnect =	usbnet_disconnect,
+	.disconnect =	ax88179_disconnect,
 	.supports_autosuspend = 1,
 	.disable_hub_initiated_lpm = 1,
 };

drivers/thunderbolt/debugfs.c

@@ -959,7 +959,7 @@ static void margining_port_remove(struct tb_port *port)
 	snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
 	parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
 	if (parent)
-		debugfs_remove_recursive(debugfs_lookup("margining", parent));
+		debugfs_lookup_and_remove("margining", parent);
 
 	kfree(port->usb4->margining);
 	port->usb4->margining = NULL;

drivers/thunderbolt/usb4.c

@@ -2311,13 +2311,13 @@ int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw,
 		goto err_request;
 
 	/*
-	 * Always keep 1000 Mb/s to make sure xHCI has at least some
+	 * Always keep 900 Mb/s to make sure xHCI has at least some
 	 * bandwidth available for isochronous traffic.
 	 */
-	if (consumed_up < 1000)
-		consumed_up = 1000;
-	if (consumed_down < 1000)
-		consumed_down = 1000;
+	if (consumed_up < 900)
+		consumed_up = 900;
+	if (consumed_down < 900)
+		consumed_down = 900;
 
 	ret = usb4_usb3_port_write_allocated_bandwidth(port, consumed_up,
 						       consumed_down);

drivers/usb/fotg210/fotg210-hcd.c

@@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh,
 			temp = size;
 		size -= temp;
 		next += temp;
-		if (temp == size)
-			goto done;
 	}
 
 	temp = snprintf(next, size, "\n");
@@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh,
 	size -= temp;
 	next += temp;
 
-done:
 	*sizep = size;
 	*nextp = next;
 }

drivers/usb/serial/ftdi_sio.c

@@ -1033,9 +1033,9 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) },
-	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_UID_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_USA_PID) },
+	{ USB_DEVICE(FTDI_VID, ACTISENSE_NGX_PID) },
 	{ USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) },
 	{ USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -1568,9 +1568,9 @@
 #define ACTISENSE_USG_PID		0xD9A9 /* USG USB Serial Adapter */
 #define ACTISENSE_NGT_PID		0xD9AA /* NGT NMEA2000 Interface */
 #define ACTISENSE_NGW_PID		0xD9AB /* NGW NMEA2000 Gateway */
-#define ACTISENSE_D9AC_PID		0xD9AC /* Actisense Reserved */
-#define ACTISENSE_D9AD_PID		0xD9AD /* Actisense Reserved */
-#define ACTISENSE_D9AE_PID		0xD9AE /* Actisense Reserved */
+#define ACTISENSE_UID_PID		0xD9AC /* USB Isolating Device */
+#define ACTISENSE_USA_PID		0xD9AD /* USB to Serial Adapter */
+#define ACTISENSE_NGX_PID		0xD9AE /* NGX NMEA2000 Gateway */
 #define ACTISENSE_D9AF_PID		0xD9AF /* Actisense Reserved */
 #define CHETCO_SEAGAUGE_PID		0xA548 /* SeaGauge USB Adapter */
 #define CHETCO_SEASWITCH_PID		0xA549 /* SeaSwitch USB Adapter */

drivers/usb/serial/option.c

@@ -272,6 +272,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200U			0x0901
+#define QUECTEL_PRODUCT_EG912Y			0x6001
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200A			0x6005
 #define QUECTEL_PRODUCT_EM061K_LWW		0x6008
@@ -1232,6 +1233,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */
 	  .driver_info = RSVD(3) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
 	  .driver_info = ZLP },
@@ -1244,6 +1246,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG912Y, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
 
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
@@ -2242,6 +2245,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(0x0489, 0xe0b5),						/* Foxconn T77W968 ESIM */
 	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0da, 0xff),                     /* Foxconn T99W265 MBIM variant */
+	  .driver_info = RSVD(3) | RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0db, 0xff),			/* Foxconn T99W265 MBIM */
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0ee, 0xff),			/* Foxconn T99W368 MBIM */

drivers/usb/storage/unusual_devs.h

@@ -1305,6 +1305,17 @@ UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_INITIAL_READ10 ),
 
+/*
+ * Patch by Tasos Sahanidis <tasos@tasossah.com>
+ * This flash drive always shows up with write protect enabled
+ * during the first mode sense.
+ */
+UNUSUAL_DEV(0x0951, 0x1697, 0x0100, 0x0100,
+		"Kingston",
+		"DT Ultimate G3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT),
+
 /*
  * This Pentax still camera is not conformant
  * to the USB storage specification: -

drivers/usb/typec/ucsi/ucsi_glink.c

@@ -228,7 +228,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 
 	con_num = UCSI_CCI_CONNECTOR(cci);
 	if (con_num) {
-		if (con_num < PMIC_GLINK_MAX_PORTS &&
+		if (con_num <= PMIC_GLINK_MAX_PORTS &&
 		    ucsi->port_orientation[con_num - 1]) {
 			int orientation = gpiod_get_value(ucsi->port_orientation[con_num - 1]);