MIPS: AR7: remove platform

After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].

[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7

Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Author: Wolfram Sang

arch/mips/Kbuild.platforms

@@ -2,7 +2,6 @@
 # All platforms listed in alphabetic order
 
 platform-$(CONFIG_MIPS_ALCHEMY)		+= alchemy/
-platform-$(CONFIG_AR7)			+= ar7/
 platform-$(CONFIG_ATH25)		+= ath25/
 platform-$(CONFIG_ATH79)		+= ath79/
 platform-$(CONFIG_BCM47XX)		+= bcm47xx/

arch/mips/Kconfig

@@ -202,28 +202,6 @@ config MIPS_ALCHEMY
 	select SYS_SUPPORTS_ZBOOT
 	select COMMON_CLK
 
-config AR7
-	bool "Texas Instruments AR7"
-	select BOOT_ELF32
-	select COMMON_CLK
-	select DMA_NONCOHERENT
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_MIPS_CPU
-	select NO_EXCEPT_FILL
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_EARLY_PRINTK
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MIPS16
-	select SYS_SUPPORTS_ZBOOT_UART16550
-	select GPIOLIB
-	select VLYNQ
-	help
-	  Support for the Texas Instruments AR7 System-on-a-Chip
-	  family: TNETD7100, 7200 and 7300.
-
 config ATH25
 	bool "Atheros AR231x/AR531x SoC support"
 	select CEVT_R4K