octeontx2-af: cn10kb: fix interrupt csr addresses

The current design is that, for asynchronous events like link_up and
link_down firmware raises the interrupt to kernel. The previous patch
which added RPM_USX driver has a bug where it uses old csr addresses
for configuring interrupts. Which is resulting in losing interrupts
from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes: b9d0fed ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Author: Hariprasad Kelam

drivers/net/ethernet/marvell/octeontx2/af/rpm.c

@@ -47,7 +47,7 @@ static struct mac_ops		rpm2_mac_ops   = {
 	.int_set_reg    =       RPM2_CMRX_SW_INT_ENA_W1S,
 	.irq_offset     =       1,
 	.int_ena_bit    =       BIT_ULL(0),
-	.lmac_fwi	=	RPM_LMAC_FWI,
+	.lmac_fwi	=	RPM2_LMAC_FWI,
 	.non_contiguous_serdes_lane = true,
 	.rx_stats_cnt   =       43,
 	.tx_stats_cnt   =       34,

drivers/net/ethernet/marvell/octeontx2/af/rpm.h

@@ -94,7 +94,8 @@
 
 /* CN10KB CSR Declaration */
 #define  RPM2_CMRX_SW_INT				0x1b0
-#define  RPM2_CMRX_SW_INT_ENA_W1S			0x1b8
+#define  RPM2_CMRX_SW_INT_ENA_W1S			0x1c8
+#define  RPM2_LMAC_FWI					0x12
 #define  RPM2_CMR_CHAN_MSK_OR				0x3120
 #define  RPM2_CMR_RX_OVR_BP_EN				BIT_ULL(2)
 #define  RPM2_CMR_RX_OVR_BP_BP				BIT_ULL(1)