Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add some new hardware support (for example, IceLake-D idle
  states in intel_idle), fix some issues (for example, the handling of
  negative "sleep length" values in cpuidle governors), add new
  functionality to the existing drivers (for example, scale-invariance
  support in the ACPI CPPC cpufreq driver) and clean up code all over.

  Specifics:

   - Add idle states table for IceLake-D to the intel_idle driver and
     update IceLake-X C6 data in it (Artem Bityutskiy).

   - Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
     drop the unused do_idle() firmware call from it (Dmitry Osipenko).

   - Fix cpuidle-qcom-spm Kconfig entry (He Ying).

   - Fix handling of possible negative tick_nohz_get_next_hrtimer()
     return values of in cpuidle governors (Rafael Wysocki).

   - Add support for frequency-invariance to the ACPI CPPC cpufreq
     driver and update the frequency-invariance engine (FIE) to use it
     as needed (Viresh Kumar).

   - Simplify the default delay_us setting in the ACPI CPPC cpufreq
     driver (Tom Saeger).

   - Clean up frequency-related computations in the intel_pstate cpufreq
     driver (Rafael Wysocki).

   - Fix TBG parent setting for load levels in the armada-37xx cpufreq
     driver and drop the CPU PM clock .set_parent method for armada-37xx
     (Marek Behún).

   - Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).

   - Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
     cpufreq-dt to take the -EPROBE_DEFER one into acconut as
     appropriate (Quanyang Wang).

   - Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).

   - Drop the unused for_each_policy() macro from cpufreq (Shaokun
     Zhang).

   - Simplify computations in the schedutil cpufreq governor to avoid
     unnecessary overhead (Yue Hu).

   - Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).

   - Fix cpufreq documentation links in Kconfig (Alexander Monakov).

   - Fix PCI device power state handling in pci_enable_device_flags() to
     avoid issuse in some cases when the device depends on an ACPI power
     resource (Rafael Wysocki).

   - Add missing documentation of pm_runtime_resume_and_get() (Alan
     Stern).

   - Add missing static inline stub for pm_runtime_has_no_callbacks() to
     pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
     (YueHaibing).

   - Drop duplicate struct device declaration from pm.h and fix a
     structure type declaration in intel_rapl.h (Wan Jiabing).

   - Use dev_set_name() instead of an open-coded equivalent of it in the
     wakeup sources code and drop a redundant local variable
     initialization from it (Andy Shevchenko, Colin Ian King).

   - Use crc32 instead of md5 for e820 memory map integrity check during
     resume from hibernation on x86 (Chris von Recklinghausen).

   - Fix typos in comments in the system-wide and hibernation support
     code (Lu Jialin).

   - Modify the generic power domains (genpd) code to avoid resuming
     devices in the "prepare" phase of system-wide suspend and
     hibernation (Ulf Hansson).

   - Add Hygon Fam18h RAPL support to the intel_rapl power capping
     driver (Pu Wen).

   - Add MAINTAINERS entry for the dynamic thermal power management
     (DTPM) code (Daniel Lezcano).

   - Add devm variants of operating performance points (OPP) API
     functions and switch over some users of the OPP framework to the
     new resource-managed API (Yangtao Li and Dmitry Osipenko).

   - Update devfreq core:

      * Register devfreq devices as cooling devices on demand (Daniel
        Lezcano).

      * Add missing unlock opeation in devfreq_add_device() (Lukasz
        Luba).

      * Use the next frequency as resume_freq instead of the previous
        frequency when using the opp-suspend property (Dong Aisheng).

      * Check get_dev_status in devfreq_update_stats() (Dong Aisheng).

      * Fix set_freq path for the userspace governor in Kconfig (Dong
        Aisheng).

      * Remove invalid description of get_target_freq() (Dong Aisheng).

   - Update devfreq drivers:

      * imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
        of_match_ptr() (Dong Aisheng, Fabio Estevam).

      * rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
        references to undefined symbols (Enric Balletbo i Serra, Gaël
        PORTAY).

      * rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
        Kozlowski).

      * imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).

   - Fix kernel-doc warnings in three places (Pierre-Louis Bossart).

   - Fix typo in the pm-graph utility code (Ricardo Ribalda)"

* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  PM: wakeup: remove redundant assignment to variable retval
  PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
  cpufreq: Kconfig: fix documentation links
  PM: wakeup: use dev_set_name() directly
  PM: runtime: Add documentation for pm_runtime_resume_and_get()
  cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
  cpufreq: armada-37xx: Fix module unloading
  cpufreq: armada-37xx: Remove cur_frequency variable
  cpufreq: armada-37xx: Fix determining base CPU frequency
  cpufreq: armada-37xx: Fix driver cleanup when registration failed
  clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
  clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
  cpufreq: armada-37xx: Fix the AVS value for load L1
  clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
  cpufreq: armada-37xx: Fix setting TBG parent for load levels
  cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
  cpuidle: tegra: Remove do_idle firmware call
  cpuidle: tegra: Fix C7 idling state on Tegra114
  PM: sleep: fix typos in comments
  cpufreq: Remove unused for_each_policy macro
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-class-devfreq

@@ -97,10 +97,7 @@ Description:
 		object. The values are represented in ms. If the value is
 		less than 1 jiffy, it is considered to be 0, which means
 		no polling. This value is meaningless if the governor is
-		not polling; thus. If the governor is not using
-		devfreq-provided central polling
-		(/sys/class/devfreq/.../central_polling is 0), this value
-		may be useless.
+		not polling.
 
 		A list of governors that support the node:
 		- simple_ondmenad

Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt

@@ -12,6 +12,8 @@ Required properties:
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
+- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
+			 files".
 
 Optional properties:
 - interrupts:		 The CPU interrupt number. The interrupt specifier
@@ -77,24 +79,23 @@ Following properties relate to DDR timing:
 
 - rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
 				  the DRAM side driver strength in ohms. Default
-				  value is DDR3_DS_40ohm.
+				  value is 40.
 
 - rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
 				  the DRAM side ODT strength in ohms. Default value
-				  is DDR3_ODT_120ohm.
+				  is 120.
 
 - rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
 				  the phy side CA line (incluing command line,
 				  address line and clock line) driver strength.
-				  Default value is PHY_DRV_ODT_40.
+				  Default value is 40.
 
 - rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
 				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is PHY_DRV_ODT_40.
+				  driver strength. Default value is 40.
 
 - rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is
-				  PHY_DRV_ODT_240.
+				  the PHY side ODT strength. Default value is 240.
 
 - rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
 				  then ODT disable frequency in MHz (Mega Hz).
@@ -104,25 +105,23 @@ Following properties relate to DDR timing:
 
 - rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
 				  the DRAM side driver strength in ohms. Default
-				  value is LP3_DS_34ohm.
+				  value is 34.
 
 - rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
 				  the DRAM side ODT strength in ohms. Default value
-				  is LP3_ODT_240ohm.
+				  is 240.
 
 - rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
 				  the PHY side CA line (including command line,
 				  address line and clock line) driver strength.
-				  Default value is PHY_DRV_ODT_40.
+				  Default value is 40.
 
 - rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
 				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is
-				  PHY_DRV_ODT_40.
+				  driver strength. Default value is 40.
 
 - rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is
-				  PHY_DRV_ODT_240.
+				  the phy side odt strength, default value is 240.
 
 - rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
 				  defines the ODT disable frequency in
@@ -132,32 +131,30 @@ Following properties relate to DDR timing:
 
 - rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
 				  the DRAM side driver strength in ohms. Default
-				  value is LP4_PDDS_60ohm.
+				  value is 60.
 
 - rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
 				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is LP4_DQ_ODT_40ohm.
+				  Default value is 40.
 
 - rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
 				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is LP4_CA_ODT_40ohm.
+				  Default value is 40.
 
 - rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
 				  the PHY side CA line (including command address
-				  line) driver strength. Default value is
-				  PHY_DRV_ODT_40.
+				  line) driver strength. Default value is 40.
 
 - rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
 				  the PHY side clock line and CS line driver
-				  strength. Default value is PHY_DRV_ODT_80.
+				  strength. Default value is 80.
 
 - rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
 				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is PHY_DRV_ODT_80.
+				  driver strength. Default value is 80.
 
 - rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is
-				  PHY_DRV_ODT_60.
+				  the PHY side ODT strength. Default value is 60.
 
 Example:
 	dmc_opp_table: dmc_opp_table {
@@ -193,23 +190,23 @@ Example:
 		rockchip,phy_dll_dis_freq = <125>;
 		rockchip,auto_pd_dis_freq = <666>;
 		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <DDR3_DS_40ohm>;
-		rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
-		rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
+		rockchip,ddr3_drv = <40>;
+		rockchip,ddr3_odt = <120>;
+		rockchip,phy_ddr3_ca_drv = <40>;
+		rockchip,phy_ddr3_dq_drv = <40>;
+		rockchip,phy_ddr3_odt = <240>;
 		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <LP3_DS_34ohm>;
-		rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
-		rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
+		rockchip,lpddr3_drv = <34>;
+		rockchip,lpddr3_odt = <240>;
+		rockchip,phy_lpddr3_ca_drv = <40>;
+		rockchip,phy_lpddr3_dq_drv = <40>;
+		rockchip,phy_lpddr3_odt = <240>;
 		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
-		rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
-		rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
-		rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
-		rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
-		rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
+		rockchip,lpddr4_drv = <60>;
+		rockchip,lpddr4_dq_odt = <40>;
+		rockchip,lpddr4_ca_odt = <40>;
+		rockchip,phy_lpddr4_ca_drv = <40>;
+		rockchip,phy_lpddr4_ck_cs_drv = <80>;
+		rockchip,phy_lpddr4_dq_drv = <80>;
+		rockchip,phy_lpddr4_odt = <60>;
 	};

Documentation/power/runtime_pm.rst

@@ -339,6 +339,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       checked additionally, and -EACCES means that 'power.disable_depth' is
       different from 0
 
+  `int pm_runtime_resume_and_get(struct device *dev);`
+    - run pm_runtime_resume(dev) and if successful, increment the device's
+      usage counter; return the result of pm_runtime_resume
+
   `int pm_request_idle(struct device *dev);`
     - submit a request to execute the subsystem-level idle callback for the
       device (the request is represented by a work item in pm_wq); returns 0 on

MAINTAINERS

@@ -14439,6 +14439,15 @@ F:	include/linux/pm_*
 F:	include/linux/powercap.h
 F:	kernel/configs/nopm.config
 
+DYNAMIC THERMAL POWER MANAGEMENT (DTPM)
+M:	Daniel Lezcano <daniel.lezcano@kernel.org>
+L:	linux-pm@vger.kernel.org
+S:	Supported
+B:	https://bugzilla.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+F:	drivers/powercap/dtpm*
+F:	include/linux/dtpm.h
+
 POWER STATE COORDINATION INTERFACE (PSCI)
 M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

arch/arm64/include/asm/topology.h

@@ -17,17 +17,9 @@ int pcibus_to_node(struct pci_bus *bus);
 #include <linux/arch_topology.h>
 
 void update_freq_counters_refs(void);
-void topology_scale_freq_tick(void);
-
-#ifdef CONFIG_ARM64_AMU_EXTN
-/*
- * Replace task scheduler's default counter-based
- * frequency-invariance scale factor setting.
- */
-#define arch_scale_freq_tick topology_scale_freq_tick
-#endif /* CONFIG_ARM64_AMU_EXTN */
 
 /* Replace task scheduler's default frequency-invariant accounting */
+#define arch_scale_freq_tick topology_scale_freq_tick
 #define arch_set_freq_scale topology_set_freq_scale
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant

arch/arm64/kernel/topology.c

@@ -199,12 +199,47 @@ static int freq_inv_set_max_ratio(int cpu, u64 max_rate, u64 ref_rate)
 	return 0;
 }
 
-static DEFINE_STATIC_KEY_FALSE(amu_fie_key);
-#define amu_freq_invariant() static_branch_unlikely(&amu_fie_key)
+static void amu_scale_freq_tick(void)
+{
+	u64 prev_core_cnt, prev_const_cnt;
+	u64 core_cnt, const_cnt, scale;
+
+	prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
+	prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
+
+	update_freq_counters_refs();
+
+	const_cnt = this_cpu_read(arch_const_cycles_prev);
+	core_cnt = this_cpu_read(arch_core_cycles_prev);
+
+	if (unlikely(core_cnt <= prev_core_cnt ||
+		     const_cnt <= prev_const_cnt))
+		return;
+
+	/*
+	 *	    /\core    arch_max_freq_scale
+	 * scale =  ------- * --------------------
+	 *	    /\const   SCHED_CAPACITY_SCALE
+	 *
+	 * See validate_cpu_freq_invariance_counters() for details on
+	 * arch_max_freq_scale and the use of SCHED_CAPACITY_SHIFT.
+	 */
+	scale = core_cnt - prev_core_cnt;
+	scale *= this_cpu_read(arch_max_freq_scale);
+	scale = div64_u64(scale >> SCHED_CAPACITY_SHIFT,
+			  const_cnt - prev_const_cnt);
+
+	scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
+	this_cpu_write(arch_freq_scale, (unsigned long)scale);
+}
+
+static struct scale_freq_data amu_sfd = {
+	.source = SCALE_FREQ_SOURCE_ARCH,
+	.set_freq_scale = amu_scale_freq_tick,
+};
 
 static void amu_fie_setup(const struct cpumask *cpus)
 {
-	bool invariant;
 	int cpu;
 
 	/* We are already set since the last insmod of cpufreq driver */
@@ -221,25 +256,10 @@ static void amu_fie_setup(const struct cpumask *cpus)
 
 	cpumask_or(amu_fie_cpus, amu_fie_cpus, cpus);
 
-	invariant = topology_scale_freq_invariant();
-
-	/* We aren't fully invariant yet */
-	if (!invariant && !cpumask_equal(amu_fie_cpus, cpu_present_mask))
-		return;
-
-	static_branch_enable(&amu_fie_key);
+	topology_set_scale_freq_source(&amu_sfd, amu_fie_cpus);
 
 	pr_debug("CPUs[%*pbl]: counters will be used for FIE.",
 		 cpumask_pr_args(cpus));
-
-	/*
-	 * Task scheduler behavior depends on frequency invariance support,
-	 * either cpufreq or counter driven. If the support status changes as
-	 * a result of counter initialisation and use, retrigger the build of
-	 * scheduling domains to ensure the information is propagated properly.
-	 */
-	if (!invariant)
-		rebuild_sched_domains_energy();
 }
 
 static int init_amu_fie_callback(struct notifier_block *nb, unsigned long val,
@@ -256,8 +276,8 @@ static int init_amu_fie_callback(struct notifier_block *nb, unsigned long val,
 	 * initialized AMU support and enabled invariance. The AMU counters will
 	 * keep on working just fine in the absence of the cpufreq driver, and
 	 * for the CPUs for which there are no counters available, the last set
-	 * value of freq_scale will remain valid as that is the frequency those
-	 * CPUs are running at.
+	 * value of arch_freq_scale will remain valid as that is the frequency
+	 * those CPUs are running at.
 	 */
 
 	return 0;
@@ -283,53 +303,6 @@ static int __init init_amu_fie(void)
 }
 core_initcall(init_amu_fie);
 
-bool arch_freq_counters_available(const struct cpumask *cpus)
-{
-	return amu_freq_invariant() &&
-	       cpumask_subset(cpus, amu_fie_cpus);
-}
-
-void topology_scale_freq_tick(void)
-{
-	u64 prev_core_cnt, prev_const_cnt;
-	u64 core_cnt, const_cnt, scale;
-	int cpu = smp_processor_id();
-
-	if (!amu_freq_invariant())
-		return;
-
-	if (!cpumask_test_cpu(cpu, amu_fie_cpus))
-		return;
-
-	prev_const_cnt = this_cpu_read(arch_const_cycles_prev);
-	prev_core_cnt = this_cpu_read(arch_core_cycles_prev);
-
-	update_freq_counters_refs();
-
-	const_cnt = this_cpu_read(arch_const_cycles_prev);
-	core_cnt = this_cpu_read(arch_core_cycles_prev);
-
-	if (unlikely(core_cnt <= prev_core_cnt ||
-		     const_cnt <= prev_const_cnt))
-		return;
-
-	/*
-	 *	    /\core    arch_max_freq_scale
-	 * scale =  ------- * --------------------
-	 *	    /\const   SCHED_CAPACITY_SCALE
-	 *
-	 * See validate_cpu_freq_invariance_counters() for details on
-	 * arch_max_freq_scale and the use of SCHED_CAPACITY_SHIFT.
-	 */
-	scale = core_cnt - prev_core_cnt;
-	scale *= this_cpu_read(arch_max_freq_scale);
-	scale = div64_u64(scale >> SCHED_CAPACITY_SHIFT,
-			  const_cnt - prev_const_cnt);
-
-	scale = min_t(unsigned long, scale, SCHED_CAPACITY_SCALE);
-	this_cpu_write(freq_scale, (unsigned long)scale);
-}
-
 #ifdef CONFIG_ACPI_CPPC_LIB
 #include <acpi/cppc_acpi.h>
 

arch/x86/kernel/e820.c

@@ -31,8 +31,8 @@
  *       - inform the user about the firmware's notion of memory layout
  *         via /sys/firmware/memmap
  *
- *       - the hibernation code uses it to generate a kernel-independent MD5
- *         fingerprint of the physical memory layout of a system.
+ *       - the hibernation code uses it to generate a kernel-independent CRC32
+ *         checksum of the physical memory layout of a system.
  *
  * - 'e820_table_kexec': a slightly modified (by the kernel) firmware version
  *   passed to us by the bootloader - the major difference between