Merge patch series "RISC-V interrupt controller select cleanup"

Conor Dooley <conor@kernel.org> says:

From: Conor Dooley <conor.dooley@microchip.com>

Submitted a patch yesterday defaulting the SiFive PLIC driver to
enabled [0], and in the ensuing conversation Marc suggested just doing a
select at the arch level and dropping the user selectability completely.

* b4-shazam-merge:
  RISC-V: stop selecting SIFIVE_PLIC at the SoC level
  irqchip/riscv-intc: remove user selectability of RISCV_INTC
  irqchip/sifive-plic: remove user selectability of SIFIVE_PLIC

Link: https://lore.kernel.org/r/20221118104300.85016-1-conor@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/87zgceszp8.wl-maz@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

Author: palmer-dabbelt

arch/riscv/Kconfig

@@ -127,6 +127,7 @@ config RISCV
 	select PCI_MSI if PCI
 	select RISCV_INTC
 	select RISCV_TIMER if RISCV_SBI
+	select SIFIVE_PLIC
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK

arch/riscv/Kconfig.socs

@@ -3,7 +3,6 @@ menu "SoC selection"
 config SOC_MICROCHIP_POLARFIRE
 	bool "Microchip PolarFire SoCs"
 	select MCHP_CLK_MPFS
-	select SIFIVE_PLIC
 	help
 	  This enables support for Microchip PolarFire SoC platforms.
 
@@ -13,7 +12,6 @@ config SOC_SIFIVE
 	select SERIAL_SIFIVE_CONSOLE if TTY
 	select CLK_SIFIVE
 	select CLK_SIFIVE_PRCI
-	select SIFIVE_PLIC
 	select ERRATA_SIFIVE if !XIP_KERNEL
 	help
 	  This enables support for SiFive SoC platform hardware.
@@ -22,7 +20,6 @@ config SOC_STARFIVE
 	bool "StarFive SoCs"
 	select PINCTRL
 	select RESET_CONTROLLER
-	select SIFIVE_PLIC
 	help
 	  This enables support for StarFive SoC platform hardware.
 
@@ -34,7 +31,6 @@ config SOC_VIRT
 	select POWER_RESET_SYSCON_POWEROFF
 	select GOLDFISH
 	select RTC_DRV_GOLDFISH if RTC_CLASS
-	select SIFIVE_PLIC
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select RISCV_SBI_CPUIDLE if CPU_IDLE && RISCV_SBI
@@ -47,7 +43,6 @@ config SOC_CANAAN
 	select CLINT_TIMER if RISCV_M_MODE
 	select SERIAL_SIFIVE if TTY
 	select SERIAL_SIFIVE_CONSOLE if TTY
-	select SIFIVE_PLIC
 	select ARCH_HAS_RESET_CONTROLLER
 	select PINCTRL
 	select COMMON_CLK

drivers/irqchip/Kconfig

@@ -538,31 +538,14 @@ config TI_PRUSS_INTC
 	  different processors within the SoC.
 
 config RISCV_INTC
-	bool "RISC-V Local Interrupt Controller"
+	bool
 	depends on RISCV
-	default y
-	help
-	   This enables support for the per-HART local interrupt controller
-	   found in standard RISC-V systems.  The per-HART local interrupt
-	   controller handles timer interrupts, software interrupts, and
-	   hardware interrupts. Without a per-HART local interrupt controller,
-	   a RISC-V system will be unable to handle any interrupts.
-
-	   If you don't know what to do here, say Y.
 
 config SIFIVE_PLIC
-	bool "SiFive Platform-Level Interrupt Controller"
+	bool
 	depends on RISCV
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
-	help
-	   This enables support for the PLIC chip found in SiFive (and
-	   potentially other) RISC-V systems.  The PLIC controls devices
-	   interrupts and connects them to each core's local interrupt
-	   controller.  Aside from timer and software interrupts, all other
-	   interrupt sources are subordinate to the PLIC.
-
-	   If you don't know what to do here, say Y.
 
 config EXYNOS_IRQ_COMBINER
 	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST