Merge tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal updates from Daniel Lezcano:

 - Remove duplicate error message for the amlogic driver (Tang Bin)

 - Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury)

 - Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund)

 - Remove duplicate include in ti-bandgap (Zhang Yunkai)

 - Assign error code in the error path in the function
   thermal_of_populate_bind_params() (Jia-Ju Bai)

 - Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian
   King)

 - Use the device name instead of auto-numbering for a better
   identification of the cooling device (Daniel Lezcano)

 - Improve a bit the division accuracy in the power allocator governor
   (Jeson Gao)

 - Enable the missing third sensor on msm8976 (Konrad Dybcio)

 - Add QCom tsens driver co-maintainer (Thara Gopinath)

 - Fix memory leak and use after free errors in the core code (Daniel
   Lezcano)

 - Add the MDM9607 compatible bindings (Konrad Dybcio)

 - Fix trivial spello in the copyright name for Hisilicon (Hao Fang)

 - Fix negative index array access when converting the frequency to
   power in the energy model (Brian-sy Yang)

 - Add support for Gen2 new PMIC support for Qcom SPMI (David Collins)

 - Update maintainer file for CPU cooling device section (Lukasz Luba)

 - Fix missing put_device on error in the Qcom tsens driver (Guangqing
   Zhu)

 - Add compatible DT binding for sm8350 (Robert Foss)

 - Add support for the MDM9607's tsens driver (Konrad Dybcio)

 - Remove duplicate error messages in thermal_mmio and the bcm2835
   driver (Ruiqi Gong)

 - Add the Thermal Temperature Cooling driver (Zhang Rui)

 - Remove duplicate error messages in the Hisilicon sensor driver (Ye
   Bin)

 - Use the devm_platform_ioremap_resource_byname() function instead of a
   couple of corresponding calls (dingsenjie)

 - Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei)

 - Add missing property in the DT thermal sensor binding (Rafał Miłecki)

 - Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe)

 - Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki)

 - Replace the thermal_notify_framework() call by a call to the
   thermal_zone_device_update() function. Remove the function as well as
   the corresponding documentation (Thara Gopinath)

 - Add support for the ipq8064-tsens sensor along with a set of cleanups
   and code preparation (Ansuel Smith)

 - Add a lockless __thermal_cdev_update() function to improve the
   locking scheme in the core code and governors (Lukasz Luba)

 - Fix multiple cooling device notification changes (Lukasz Luba)

 - Remove unneeded variable initialization (Colin Ian King)

* tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits)
  thermal/drivers/mtk_thermal: Remove redundant initializations of several variables
  thermal/core/power allocator: Use the lockless __thermal_cdev_update() function
  thermal/core/fair share: Use the lockless __thermal_cdev_update() function
  thermal/core/fair share: Lock the thermal zone while looping over instances
  thermal/core/power_allocator: Update once cooling devices when temp is low
  thermal/core/power_allocator: Maintain the device statistics from going stale
  thermal/core: Create a helper __thermal_cdev_update() without a lock
  dt-bindings: thermal: tsens: Document ipq8064 bindings
  thermal/drivers/tsens: Add support for ipq8064-tsens
  thermal/drivers/tsens: Drop unused define for msm8960
  thermal/drivers/tsens: Replace custom 8960 apis with generic apis
  thermal/drivers/tsens: Fix bug in sensor enable for msm8960
  thermal/drivers/tsens: Use init_common for msm8960
  thermal/drivers/tsens: Add VER_0 tsens version
  thermal/drivers/tsens: Convert msm8960 to reg_field
  thermal/drivers/tsens: Don't hardcode sensor slope
  Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation
  thermal/core: Remove thermal_notify_framework
  iwlwifi: mvm: tt: Replace thermal_notify_framework
  dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema
  ...

Author: torvalds

Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Thermal
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+  Thermal sensor that is part of Northstar's DMU (Device Management Unit).
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: brcm,ns-thermal
+
+  reg:
+    description: PVTMON registers range
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    thermal: thermal@1800c2c0 {
+        compatible = "brcm,ns-thermal";
+        reg = <0x1800c2c0 0x10>;
+        #thermal-sensor-cells = <0>;
+    };
+
+    thermal-zones {
+        cpu-thermal {
+            polling-delay-passive = <0>;
+            polling-delay = <1000>;
+            coefficients = <(-556) 418000>;
+            thermal-sensors = <&thermal>;
+
+            trips {
+                cpu-crit {
+                    temperature = <125000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+
+            cooling-maps {
+            };
+        };
+    };

Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml

@@ -19,9 +19,15 @@ description: |
 properties:
   compatible:
     oneOf:
+      - description: msm9860 TSENS based
+        items:
+          - enum:
+              - qcom,ipq8064-tsens
+
       - description: v0.1 of TSENS
         items:
           - enum:
+              - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
               - qcom,msm8939-tsens
               - qcom,msm8974-tsens
@@ -43,6 +49,7 @@ properties:
               - qcom,sdm845-tsens
               - qcom,sm8150-tsens
               - qcom,sm8250-tsens
+              - qcom,sm8350-tsens
           - const: qcom,tsens-v2
 
   reg:
@@ -73,7 +80,9 @@ properties:
     maxItems: 2
     items:
       - const: calib
-      - const: calib_sel
+      - enum:
+          - calib_backup
+          - calib_sel
 
   "#qcom,sensors":
     description:
@@ -88,12 +97,21 @@ properties:
       Number of cells required to uniquely identify the thermal sensors. Since
       we have multiple sensors this is set to 1
 
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#thermal-sensor-cells"
+  - "#qcom,sensors"
+
 allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,ipq8064-tsens
+              - qcom,mdm9607-tsens
               - qcom,msm8916-tsens
               - qcom,msm8974-tsens
               - qcom,msm8976-tsens
@@ -114,17 +132,42 @@ allOf:
         interrupt-names:
           minItems: 2
 
-required:
-  - compatible
-  - reg
-  - "#qcom,sensors"
-  - interrupts
-  - interrupt-names
-  - "#thermal-sensor-cells"
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,tsens-v0_1
+              - qcom,tsens-v1
+              - qcom,tsens-v2
+
+    then:
+      required:
+        - reg
 
 additionalProperties: false
 
 examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    // Example msm9860 based SoC (ipq8064):
+    gcc: clock-controller {
+
+           /* ... */
+
+           tsens: thermal-sensor {
+                compatible = "qcom,ipq8064-tsens";
+
+                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+                 nvmem-cell-names = "calib", "calib_backup";
+                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                 interrupt-names = "uplow";
+
+                 #qcom,sensors = <11>;
+                 #thermal-sensor-cells = <1>;
+          };
+    };
+
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):

Documentation/devicetree/bindings/thermal/qcom-tsens.yaml

@@ -28,14 +28,7 @@ properties:
       - renesas,r8a77980-thermal # R-Car V3H
       - renesas,r8a779a0-thermal # R-Car V3U
 
-  reg:
-    minItems: 2
-    maxItems: 4
-    items:
-      - description: TSC1 registers
-      - description: TSC2 registers
-      - description: TSC3 registers
-      - description: TSC4 registers
+  reg: true
 
   interrupts:
     items:
@@ -71,8 +64,25 @@ if:
           enum:
             - renesas,r8a779a0-thermal
 then:
+  properties:
+    reg:
+      minItems: 2
+      maxItems: 3
+      items:
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
   required:
     - interrupts
+else:
+  properties:
+    reg:
+      items:
+        - description: TSC0 registers
+        - description: TSC1 registers
+        - description: TSC2 registers
+        - description: TSC3 registers
+        - description: TSC4 registers
 
 additionalProperties: false
 
@@ -111,3 +121,20 @@ examples:
                     };
             };
     };
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    tsc_r8a779a0: thermal@e6190000 {
+            compatible = "renesas,r8a779a0-thermal";
+            reg = <0xe6190000 0x200>,
+                  <0xe6198000 0x200>,
+                  <0xe61a0000 0x200>,
+                  <0xe61a8000 0x200>,
+                  <0xe61b0000 0x200>;
+            clocks = <&cpg CPG_MOD 919>;
+            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+            resets = <&cpg 919>;
+            #thermal-sensor-cells = <1>;
+    };

Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml

@@ -36,6 +36,9 @@ properties:
       containing several internal sensors.
     enum: [0, 1]
 
+required:
+  - "#thermal-sensor-cells"
+
 additionalProperties: true
 
 examples:

Documentation/devicetree/bindings/thermal/thermal-sensor.yaml

@@ -730,17 +730,7 @@ This function returns the thermal_instance corresponding to a given
 {thermal_zone, cooling_device, trip_point} combination. Returns NULL
 if such an instance does not exist.
 
-4.3. thermal_notify_framework
------------------------------
-
-This function handles the trip events from sensor drivers. It starts
-throttling the cooling devices according to the policy configured.
-For CRITICAL and HOT trip points, this notifies the respective drivers,
-and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
-The throttling policy is based on the configured platform data; if no
-platform data is provided, this uses the step_wise throttling policy.
-
-4.4. thermal_cdev_update
+4.3. thermal_cdev_update
 ------------------------
 
 This function serves as an arbitrator to set the state of a cooling

Documentation/driver-api/thermal/sysfs-api.rst

@@ -15197,6 +15197,7 @@ F:	include/linux/if_rmnet.h
 
 QUALCOMM TSENS THERMAL DRIVER
 M:	Amit Kucheria <amitk@kernel.org>
+M:	Thara Gopinath <thara.gopinath@linaro.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@@ -18101,7 +18102,7 @@ THERMAL/CPU_COOLING
 M:	Amit Daniel Kachhap <amit.kachhap@gmail.com>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
-M:	Javi Merino <javi.merino@kernel.org>
+R:	Lukasz Luba <lukasz.luba@arm.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	Documentation/driver-api/thermal/cpu-cooling-api.rst

MAINTAINERS

@@ -132,7 +132,7 @@ static int mlxsw_get_cooling_device_idx(struct mlxsw_thermal *thermal,
 	/* Allow mlxsw thermal zone binding to an external cooling device */
 	for (i = 0; i < ARRAY_SIZE(mlxsw_thermal_external_allowed_cdev); i++) {
 		if (strnstr(cdev->type, mlxsw_thermal_external_allowed_cdev[i],
-			    sizeof(cdev->type)))
+			    strlen(cdev->type)))
 			return 0;
 	}
 

drivers/net/ethernet/mellanox/mlxsw/core_thermal.c

@@ -146,8 +146,8 @@ void iwl_mvm_temp_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb)
 	if (mvm->tz_device.tzone) {
 		struct iwl_mvm_thermal_device *tz_dev = &mvm->tz_device;
 
-		thermal_notify_framework(tz_dev->tzone,
-					 tz_dev->fw_trips_index[ths_crossed]);
+		thermal_zone_device_update(tz_dev->tzone,
+					   THERMAL_TRIP_VIOLATED);
 	}
 #endif /* CONFIG_THERMAL */
 }

drivers/net/wireless/intel/iwlwifi/mvm/tt.c

@@ -254,10 +254,8 @@ static int amlogic_thermal_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, pdata);
 
 	base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(base)) {
-		dev_err(dev, "failed to get io address\n");
+	if (IS_ERR(base))
 		return PTR_ERR(base);
-	}
 
 	pdata->regmap = devm_regmap_init_mmio(dev, base,
 					      pdata->data->regmap_config);