regulator: bd9576: switch to using devm_fwnode_gpiod_get()

I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.

While at it switch the rest of the calls to read properties in
bd957x_probe() to the generic device property API as well.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-9-b29adfb27a6c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Author: dtor

drivers/regulator/bd9576-regulator.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
@@ -939,19 +940,19 @@ static int bd957x_probe(struct platform_device *pdev)
 	}
 
 	ic_data->regmap = regmap;
-	vout_mode = of_property_read_bool(pdev->dev.parent->of_node,
-					 "rohm,vout1-en-low");
+	vout_mode = device_property_read_bool(pdev->dev.parent,
+					      "rohm,vout1-en-low");
 	if (vout_mode) {
 		struct gpio_desc *en;
 
 		dev_dbg(&pdev->dev, "GPIO controlled mode\n");
 
 		/* VOUT1 enable state judged by VOUT1_EN pin */
 		/* See if we have GPIO defined */
-		en = devm_gpiod_get_from_of_node(&pdev->dev,
-						 pdev->dev.parent->of_node,
-						 "rohm,vout1-en-gpios", 0,
-						 GPIOD_OUT_LOW, "vout1-en");
+		en = devm_fwnode_gpiod_get(&pdev->dev,
+					   dev_fwnode(pdev->dev.parent),
+					   "rohm,vout1-en", GPIOD_OUT_LOW,
+					   "vout1-en");
 		if (!IS_ERR(en)) {
 			/* VOUT1_OPS gpio ctrl */
 			/*
@@ -986,8 +987,8 @@ static int bd957x_probe(struct platform_device *pdev)
 	 * like DDR voltage selection.
 	 */
 	platform_set_drvdata(pdev, ic_data);
-	ddr_sel =  of_property_read_bool(pdev->dev.parent->of_node,
-					 "rohm,ddr-sel-low");
+	ddr_sel = device_property_read_bool(pdev->dev.parent,
+					    "rohm,ddr-sel-low");
 	if (ddr_sel)
 		ic_data->regulator_data[2].desc.fixed_uV = 1350000;
 	else