Merge tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver updates from Greg KH:
 "Here is the large set of USB and Thunderbolt driver changes for
  6.2-rc1. Overall, thanks to the removal of a driver, more lines were
  removed than added, a nice change. Highlights include:

   - removal of the sisusbvga driver that was not used by anyone anymore

   - minor thunderbolt driver changes and tweaks

   - chipidea driver updates

   - usual set of typec driver features and hardware support added

   - musb minor driver fixes

   - fotg210 driver fixes, bringing that hardware back from the "dead"

   - minor dwc3 driver updates

   - addition, and then removal, of a list.h helper function for many
     USB and other subsystem drivers, that ended up breaking the build.
     That will come back for 6.3-rc1, it missed this merge window.

   - usual xhci updates and enhancements

   - usb-serial driver updates and support for new devices

   - other minor USB driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
  usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
  usb: dwc2: power on/off phy for peripheral mode in dual-role mode
  usb: dwc2: disable lpm feature on Rockchip SoCs
  dt-bindings: usb: mtk-xhci: add support for mt7986
  usb: dwc3: core: defer probe on ulpi_read_id timeout
  usb: ulpi: defer ulpi_register on ulpi_read_id timeout
  usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
  dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
  dt-bindings: vendor-prefixes: add Genesys Logic
  usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
  usb: typec: tipd: Set mode of operation for USB Type-C connector
  usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
  usb: musb: remove extra check in musb_gadget_vbus_draw
  usb: gadget: uvc: Prevent buffer overflow in setup handler
  usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
  usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
  usb: storage: Add check for kcalloc
  USB: sisusbvga: use module_usb_driver()
  USB: sisusbvga: rename sisusb.c to sisusbvga.c
  USB: sisusbvga: remove console support
  ...

Author: torvalds

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -197,7 +197,7 @@ Description:	Specific MJPEG format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
@@ -253,7 +253,7 @@ Description:	Specific uncompressed format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only

Documentation/ABI/testing/sysfs-bus-usb

@@ -264,6 +264,17 @@ Description:
 		attached to the port will not be detected, initialized,
 		or enumerated.
 
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/early_stop
+Date:		Sep 2022
+Contact:	Ray Chi <raychi@google.com>
+Description:
+		Some USB hosts have some watchdog mechanisms so that the device
+		may enter ramdump if it takes a long time during port initialization.
+		This attribute allows each port just has two attempts so that the
+		port initialization will be failed quickly. In addition, if a port
+		which is marked with early_stop has failed to initialize, it will ignore
+		all future connections until this attribute is clear.
+
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>

Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml

@@ -28,6 +28,9 @@ properties:
     items:
       - const: phy
 
+  power-domains:
+    maxItems: 1
+
   vbus-supply:
     description:
       A phandle to the regulator for USB VBUS.

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -43,7 +43,10 @@ properties:
           - const: rockchip,rk3066-usb
           - const: snps,dwc2
       - const: lantiq,arx100-usb
+      - const: lantiq,ase-usb
+      - const: lantiq,danube-usb
       - const: lantiq,xrx200-usb
+      - const: lantiq,xrx300-usb
       - items:
           - enum:
               - amlogic,meson8-usb

Documentation/devicetree/bindings/usb/genesys,gl850g.yaml

@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Genesys Logic GL850G USB 2.0 hub controller
+
+maintainers:
+  - Icenowy Zheng <uwu@icenowy.me>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb5e3,608
+
+  reg: true
+
+  reset-gpios:
+    description: GPIO controlling the RESET# pin.
+
+  vdd-supply:
+    description:
+      the regulator that provides 3.3V core power to the hub.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub: hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+            reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
+        };
+    };

Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml

@@ -28,6 +28,7 @@ properties:
           - mediatek,mt7622-xhci
           - mediatek,mt7623-xhci
           - mediatek,mt7629-xhci
+          - mediatek,mt7986-xhci
           - mediatek,mt8173-xhci
           - mediatek,mt8183-xhci
           - mediatek,mt8186-xhci

Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml

@@ -24,6 +24,7 @@ properties:
           - mediatek,mt2712-mtu3
           - mediatek,mt8173-mtu3
           - mediatek,mt8183-mtu3
+          - mediatek,mt8186-mtu3
           - mediatek,mt8188-mtu3
           - mediatek,mt8192-mtu3
           - mediatek,mt8195-mtu3

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -39,6 +39,7 @@ properties:
           - qcom,sm8250-dwc3
           - qcom,sm8350-dwc3
           - qcom,sm8450-dwc3
+          - qcom,sm8550-dwc3
       - const: qcom,dwc3
 
   reg:
@@ -301,6 +302,7 @@ allOf:
               - qcom,sm8150-dwc3
               - qcom,sm8250-dwc3
               - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
     then:
       properties:
         clocks:
@@ -358,6 +360,7 @@ allOf:
               - qcom,sm8250-dwc3
               - qcom,sm8350-dwc3
               - qcom,sm8450-dwc3
+              - qcom,sm8550-dwc3
     then:
       properties:
         interrupts:

Documentation/devicetree/bindings/usb/usb-drd.yaml

@@ -27,6 +27,7 @@ properties:
       should default to OTG.
     $ref: /schemas/types.yaml#/definitions/string
     enum: [host, peripheral, otg]
+    default: otg
 
   hnp-disable:
     description:

Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml

@@ -39,6 +39,11 @@ properties:
       the VBus line.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  wakeup-source:
+    description:
+      Specify if the USB phy can detect the remote wakeup signal
+      while the system sleep.
+
 required:
   - compatible
   - '#phy-cells'