dt-bindings: Drop unnecessary pinctrl properties

For a single pinctrl mode, it is not necessary to define pinctrl
properties as the tools always allow pinctrl properties.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220119015325.2438277-1-robh@kernel.org

Author: robherring

Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml

@@ -26,14 +26,6 @@ properties:
   clock-names:
     const: hclk
 
-  pinctrl-0:
-    maxItems: 2
-
-  pinctrl-names:
-    const: default
-    description:
-      Switch the iomux for the HPD/I2C pins to HDMI function.
-
   power-domains:
     maxItems: 1
 

Documentation/devicetree/bindings/input/gpio-keys.yaml

@@ -88,12 +88,6 @@ patternProperties:
             which can be disabled to suppress events from the button.
           type: boolean
 
-        pinctrl-0:
-          maxItems: 1
-
-        pinctrl-names:
-          maxItems: 1
-
       required:
         - linux,code
 

Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml

@@ -51,15 +51,6 @@ properties:
       appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
     maxItems: 1
 
-  pinctrl-0:
-    description:
-      A phandle to the default pinctrl state.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     type: object
     patternProperties:

Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml

@@ -30,16 +30,6 @@ description: |
     Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
 
 properties:
-  pinctrl-0:
-    description:
-      A phandle to the node containing the subnodes containing default
-      configurations.
-
-  pinctrl-names:
-    description:
-      A pinctrl state named "default" must be defined.
-    const: default
-
   pin-settings:
     description:
       One subnode is required to contain the default settings. It

Documentation/devicetree/bindings/sound/samsung-i2s.yaml

@@ -110,12 +110,6 @@ properties:
       Internal DMA register base address of the audio
       subsystem (used in secondary sound source).
 
-  pinctrl-0:
-    description: Should specify pin control groups used for this controller.
-
-  pinctrl-names:
-    const: default
-
   power-domains:
     maxItems: 1