Merge branch 'pci/controller/qcom'

- Use correct PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register for v2.7.0
  (Manivannan Sadhasivam)

- Remove "PCIE20_" prefix from register definitions (Manivannan Sadhasivam)

- Sort registers and bitfield declarations (Manivannan Sadhasivam)

- Convert to GENMASK and FIELD_PREP (Manivannan Sadhasivam)

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 (Manivannan
  Sadhasivam)

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 (Manivannan Sadhasivam)

- Rename qcom_pcie_config_sid_sm8250() to be non SM8250-specific
  (Manivannan Sadhasivam)

- Add DT "mhi" register region for supported SoCs (Manivannan Sadhasivam)

- Expose link transition counts via debugfs to help debug low power issues
  (Manivannan Sadhasivam)

- Support system suspend and resume; reduce interconnect bandwidth and turn
  off clock and PHY if there are no active devices (Manivannan Sadhasivam)

- Enable async probe by default to reduce boot time (Manivannan Sadhasivam)

- Add Manivannan Sadhasivam as qcom DT binding maintainer, replacing
  Stanimir Varbanov (Manivannan Sadhasivam)

- Add DT binding and driver support for Qcom SDX55 SoC (Manivannan
  Sadhasivam)

- Add DT binding and driver support for SM8550 SoC (Abel Vesa)

- Document msi-map and msi-map-mask DT properties (Manivannan Sadhasivam)

* pci/controller/qcom:
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  PCI: qcom: Add SM8550 PCIe support
  dt-bindings: PCI: qcom: Add SM8550 compatible
  PCI: qcom: Add support for SDX55 SoC
  dt-bindings: PCI: qcom-ep: Fix the unit address used in example
  dt-bindings: PCI: qcom: Add SDX55 SoC
  dt-bindings: PCI: qcom: Update maintainers entry
  PCI: qcom: Enable async probe by default
  PCI: qcom: Add support for system suspend and resume
  PCI: qcom: Expose link transition counts via debugfs
  dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
  PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
  PCI: qcom: Use macros for defining total no. of clocks & supplies
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
  PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
  PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
  PCI: qcom: Use lower case for hex
  PCI: qcom: Add missing macros for register fields
  PCI: qcom: Use bitfield definitions for register fields
  PCI: qcom: Sort and group registers and bitfield definitions
  PCI: qcom: Remove PCIE20_ prefix from register definitions
  PCI: qcom: Fix the incorrect register usage in v2.7.0 config

Author: bjorn-helgaas

Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml

@@ -166,7 +166,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdx55.h>
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    pcie_ep: pcie-ep@40000000 {
+    pcie_ep: pcie-ep@1c00000 {
         compatible = "qcom,sdx55-pcie-ep";
         reg = <0x01c00000 0x3000>,
               <0x40000000 0xf1d>,

Documentation/devicetree/bindings/pci/qcom,pcie.yaml

@@ -8,7 +8,7 @@ title: Qualcomm PCI express root complex
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Stanimir Varbanov <svarbanov@mm-sol.com>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description: |
   Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
@@ -33,22 +33,24 @@ properties:
           - qcom,pcie-sc8180x
           - qcom,pcie-sc8280xp
           - qcom,pcie-sdm845
+          - qcom,pcie-sdx55
           - qcom,pcie-sm8150
           - qcom,pcie-sm8250
           - qcom,pcie-sm8350
           - qcom,pcie-sm8450-pcie0
           - qcom,pcie-sm8450-pcie1
+          - qcom,pcie-sm8550
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
 
   reg:
     minItems: 4
-    maxItems: 5
+    maxItems: 6
 
   reg-names:
     minItems: 4
-    maxItems: 5
+    maxItems: 6
 
   interrupts:
     minItems: 1
@@ -58,6 +60,9 @@ properties:
     minItems: 1
     maxItems: 8
 
+  iommu-map:
+    maxItems: 2
+
   # Common definitions for clocks, clock-names and reset.
   # Platform constraints are described later.
   clocks:
@@ -120,14 +125,20 @@ required:
   - compatible
   - reg
   - reg-names
-  - interrupts
-  - interrupt-names
-  - "#interrupt-cells"
   - interrupt-map-mask
   - interrupt-map
   - clocks
   - clock-names
 
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
   - if:
@@ -185,13 +196,15 @@ allOf:
       properties:
         reg:
           minItems: 4
-          maxItems: 4
+          maxItems: 5
         reg-names:
+          minItems: 4
           items:
             - const: parf # Qualcomm specific registers
             - const: dbi # DesignWare PCIe registers
             - const: elbi # External local bus interface registers
             - const: config # PCIe configuration space
+            - const: mhi # MHI registers
 
   - if:
       properties:
@@ -201,22 +214,26 @@ allOf:
               - qcom,pcie-sc7280
               - qcom,pcie-sc8180x
               - qcom,pcie-sc8280xp
+              - qcom,pcie-sdx55
               - qcom,pcie-sm8250
               - qcom,pcie-sm8350
               - qcom,pcie-sm8450-pcie0
               - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
     then:
       properties:
         reg:
           minItems: 5
-          maxItems: 5
+          maxItems: 6
         reg-names:
+          minItems: 5
           items:
             - const: parf # Qualcomm specific registers
             - const: dbi # DesignWare PCIe registers
             - const: elbi # External local bus interface registers
             - const: atu # ATU address space
             - const: config # PCIe configuration space
+            - const: mhi # MHI registers
 
   - if:
       properties:
@@ -639,6 +656,37 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 8
+        clock-names:
+          minItems: 7
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr # Aggre NoC PCIe AXI clock
+            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+        resets:
+          minItems: 1
+          maxItems: 2
+        reset-names:
+          minItems: 1
+          items:
+            - const: pci # PCIe core reset
+            - const: link_down # PCIe link down reset
+
   - if:
       properties:
         compatible:
@@ -669,6 +717,32 @@ allOf:
           items:
             - const: pci # PCIe core reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdx55
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: sleep # PCIe Sleep clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
   - if:
       properties:
         compatible:
@@ -724,6 +798,7 @@ allOf:
               - qcom,pcie-sm8350
               - qcom,pcie-sm8450-pcie0
               - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
     then:
       oneOf:
         - properties: