Merge tag 'usb-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a small number of USB fixes for 5.12-rc3 to resolve a bunch
  of reported issues:

   - usbip fixups for issues found by syzbot

   - xhci driver fixes and quirk additions

   - gadget driver fixes

   - dwc3 QCOM driver fix

   - usb-serial new ids and fixes

   - usblp fix for a long-time issue

   - cdc-acm quirk addition

   - other tiny fixes for reported problems

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
  xhci: Fix repeated xhci wake after suspend due to uncleared internal wake state
  usb: xhci: Fix ASMedia ASM1042A and ASM3242 DMA addressing
  xhci: Improve detection of device initiated wake signal.
  usb: xhci: do not perform Soft Retry for some xHCI hosts
  usbip: fix vudc usbip_sockfd_store races leading to gpf
  usbip: fix vhci_hcd attach_store() races leading to gpf
  usbip: fix stub_dev usbip_sockfd_store() races leading to gpf
  usbip: fix vudc to check for stream socket
  usbip: fix vhci_hcd to check for stream socket
  usbip: fix stub_dev to check for stream socket
  usb: dwc3: qcom: Add missing DWC3 OF node refcount decrement
  USB: usblp: fix a hang in poll() if disconnected
  USB: gadget: udc: s3c2410_udc: fix return value check in s3c2410_udc_probe()
  usb: renesas_usbhs: Clear PIPECFG for re-enabling pipe with other EPNUM
  usb: dwc3: qcom: Honor wakeup enabled/disabled state
  usb: gadget: f_uac1: stop playback on function disable
  usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot
  USB: gadget: u_ether: Fix a configfs return code
  usb: dwc3: qcom: add ACPI device id for sc8180x
  Goodix Fingerprint device is not a modem
  ...

Author: torvalds

drivers/usb/class/cdc-acm.c

@@ -1935,6 +1935,11 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = SEND_ZERO_PACKET,
 	},
 
+	/* Exclude Goodix Fingerprint Reader */
+	{ USB_DEVICE(0x27c6, 0x5395),
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },

drivers/usb/class/usblp.c

@@ -494,16 +494,24 @@ static int usblp_release(struct inode *inode, struct file *file)
 /* No kernel lock - fine */
 static __poll_t usblp_poll(struct file *file, struct poll_table_struct *wait)
 {
-	__poll_t ret;
+	struct usblp *usblp = file->private_data;
+	__poll_t ret = 0;
 	unsigned long flags;
 
-	struct usblp *usblp = file->private_data;
 	/* Should we check file->f_mode & FMODE_WRITE before poll_wait()? */
 	poll_wait(file, &usblp->rwait, wait);
 	poll_wait(file, &usblp->wwait, wait);
+
+	mutex_lock(&usblp->mut);
+	if (!usblp->present)
+		ret |= EPOLLHUP;
+	mutex_unlock(&usblp->mut);
+
 	spin_lock_irqsave(&usblp->lock, flags);
-	ret = ((usblp->bidir && usblp->rcomplete) ? EPOLLIN  | EPOLLRDNORM : 0) |
-	   ((usblp->no_paper || usblp->wcomplete) ? EPOLLOUT | EPOLLWRNORM : 0);
+	if (usblp->bidir && usblp->rcomplete)
+		ret |= EPOLLIN  | EPOLLRDNORM;
+	if (usblp->no_paper || usblp->wcomplete)
+		ret |= EPOLLOUT | EPOLLWRNORM;
 	spin_unlock_irqrestore(&usblp->lock, flags);
 	return ret;
 }

drivers/usb/dwc3/dwc3-qcom.c

@@ -358,8 +358,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 	if (ret)
 		dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
 
+	if (device_may_wakeup(qcom->dev))
+		dwc3_qcom_enable_interrupts(qcom);
+
 	qcom->is_suspended = true;
-	dwc3_qcom_enable_interrupts(qcom);
 
 	return 0;
 }
@@ -372,7 +374,8 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 	if (!qcom->is_suspended)
 		return 0;
 
-	dwc3_qcom_disable_interrupts(qcom);
+	if (device_may_wakeup(qcom->dev))
+		dwc3_qcom_disable_interrupts(qcom);
 
 	for (i = 0; i < qcom->num_clocks; i++) {
 		ret = clk_prepare_enable(qcom->clks[i]);
@@ -650,16 +653,19 @@ static int dwc3_qcom_of_register_core(struct platform_device *pdev)
 	ret = of_platform_populate(np, NULL, NULL, dev);
 	if (ret) {
 		dev_err(dev, "failed to register dwc3 core - %d\n", ret);
-		return ret;
+		goto node_put;
 	}
 
 	qcom->dwc3 = of_find_device_by_node(dwc3_np);
 	if (!qcom->dwc3) {
+		ret = -ENODEV;
 		dev_err(dev, "failed to get dwc3 platform device\n");
-		return -ENODEV;
 	}
 
-	return 0;
+node_put:
+	of_node_put(dwc3_np);
+
+	return ret;
 }
 
 static struct platform_device *
@@ -938,6 +944,8 @@ static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = {
 static const struct acpi_device_id dwc3_qcom_acpi_match[] = {
 	{ "QCOM2430", (unsigned long)&sdm845_acpi_pdata },
 	{ "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata },
+	{ "QCOM04A6", (unsigned long)&sdm845_acpi_pdata },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match);

drivers/usb/gadget/function/f_uac1.c

@@ -499,6 +499,7 @@ static void f_audio_disable(struct usb_function *f)
 	uac1->as_out_alt = 0;
 	uac1->as_in_alt = 0;
 
+	u_audio_stop_playback(&uac1->g_audio);
 	u_audio_stop_capture(&uac1->g_audio);
 }
 

drivers/usb/gadget/function/f_uac2.c

@@ -478,7 +478,7 @@ static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 	}
 
 	max_size_bw = num_channels(chmask) * ssize *
-		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
+		((srate / (factor / (1 << (ep_desc->bInterval - 1)))) + 1);
 	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
 						    max_size_ep));
 

drivers/usb/gadget/function/u_ether_configfs.h

@@ -182,12 +182,11 @@ out:									\
 						size_t len)		\
 	{								\
 		struct f_##_f_##_opts *opts = to_f_##_f_##_opts(item);	\
-		int ret;						\
+		int ret = -EINVAL;					\
 		u8 val;							\
 									\
 		mutex_lock(&opts->lock);				\
-		ret = sscanf(page, "%02hhx", &val);			\
-		if (ret > 0) {						\
+		if (sscanf(page, "%02hhx", &val) > 0) {			\
 			opts->_n_ = val;				\
 			ret = len;					\
 		}							\

drivers/usb/gadget/udc/s3c2410_udc.c

@@ -1773,8 +1773,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
 	udc_info = dev_get_platdata(&pdev->dev);
 
 	base_addr = devm_platform_ioremap_resource(pdev, 0);
-	if (!base_addr) {
-		retval = -ENOMEM;
+	if (IS_ERR(base_addr)) {
+		retval = PTR_ERR(base_addr);
 		goto err_mem;
 	}
 

drivers/usb/host/xhci-pci.c

@@ -66,6 +66,7 @@
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
+#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -276,11 +277,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
 		xhci->quirks |= XHCI_BROKEN_STREAMS;
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
-		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
+		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
+	}
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 	    (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
-	     pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI))
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
+	     pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
 		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 
 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
@@ -295,6 +299,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == 0x9026)
 		xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
+	    (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
+	     pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
+		xhci->quirks |= XHCI_NO_SOFT_RETRY;
+
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 				"QUIRK: Resetting on resume");

drivers/usb/host/xhci-ring.c

@@ -2484,7 +2484,8 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		remaining	= 0;
 		break;
 	case COMP_USB_TRANSACTION_ERROR:
-		if ((ep_ring->err_count++ > MAX_SOFT_RETRY) ||
+		if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
+		    (ep_ring->err_count++ > MAX_SOFT_RETRY) ||
 		    le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
 			break;
 

drivers/usb/host/xhci.c

@@ -883,44 +883,42 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci)
 	xhci_set_cmd_ring_deq(xhci);
 }
 
-static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+/*
+ * Disable port wake bits if do_wakeup is not set.
+ *
+ * Also clear a possible internal port wake state left hanging for ports that
+ * detected termination but never successfully enumerated (trained to 0U).
+ * Internal wake causes immediate xHCI wake after suspend. PORT_CSC write done
+ * at enumeration clears this wake, force one here as well for unconnected ports
+ */
+
+static void xhci_disable_hub_port_wake(struct xhci_hcd *xhci,
+				       struct xhci_hub *rhub,
+				       bool do_wakeup)
 {
-	struct xhci_port **ports;
-	int port_index;
 	unsigned long flags;
 	u32 t1, t2, portsc;
+	int i;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
-	/* disable usb3 ports Wake bits */
-	port_index = xhci->usb3_rhub.num_ports;
-	ports = xhci->usb3_rhub.ports;
-	while (port_index--) {
-		t1 = readl(ports[port_index]->addr);
-		portsc = t1;
-		t1 = xhci_port_state_to_neutral(t1);
-		t2 = t1 & ~PORT_WAKE_BITS;
-		if (t1 != t2) {
-			writel(t2, ports[port_index]->addr);
-			xhci_dbg(xhci, "disable wake bits port %d-%d, portsc: 0x%x, write: 0x%x\n",
-				 xhci->usb3_rhub.hcd->self.busnum,
-				 port_index + 1, portsc, t2);
-		}
-	}
+	for (i = 0; i < rhub->num_ports; i++) {
+		portsc = readl(rhub->ports[i]->addr);
+		t1 = xhci_port_state_to_neutral(portsc);
+		t2 = t1;
+
+		/* clear wake bits if do_wake is not set */
+		if (!do_wakeup)
+			t2 &= ~PORT_WAKE_BITS;
+
+		/* Don't touch csc bit if connected or connect change is set */
+		if (!(portsc & (PORT_CSC | PORT_CONNECT)))
+			t2 |= PORT_CSC;
 
-	/* disable usb2 ports Wake bits */
-	port_index = xhci->usb2_rhub.num_ports;
-	ports = xhci->usb2_rhub.ports;
-	while (port_index--) {
-		t1 = readl(ports[port_index]->addr);
-		portsc = t1;
-		t1 = xhci_port_state_to_neutral(t1);
-		t2 = t1 & ~PORT_WAKE_BITS;
 		if (t1 != t2) {
-			writel(t2, ports[port_index]->addr);
-			xhci_dbg(xhci, "disable wake bits port %d-%d, portsc: 0x%x, write: 0x%x\n",
-				 xhci->usb2_rhub.hcd->self.busnum,
-				 port_index + 1, portsc, t2);
+			writel(t2, rhub->ports[i]->addr);
+			xhci_dbg(xhci, "config port %d-%d wake bits, portsc: 0x%x, write: 0x%x\n",
+				 rhub->hcd->self.busnum, i + 1, portsc, t2);
 		}
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
@@ -983,8 +981,8 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 		return -EINVAL;
 
 	/* Clear root port wake on bits if wakeup not allowed. */
-	if (!do_wakeup)
-		xhci_disable_port_wake_on_bits(xhci);
+	xhci_disable_hub_port_wake(xhci, &xhci->usb3_rhub, do_wakeup);
+	xhci_disable_hub_port_wake(xhci, &xhci->usb2_rhub, do_wakeup);
 
 	if (!HCD_HW_ACCESSIBLE(hcd))
 		return 0;
@@ -1088,6 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
 	bool			comp_timer_running = false;
+	bool			pending_portevent = false;
 
 	if (!hcd->state)
 		return 0;
@@ -1226,13 +1225,22 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
  done:
 	if (retval == 0) {
-		/* Resume root hubs only when have pending events. */
-		if (xhci_pending_portevent(xhci)) {
+		/*
+		 * Resume roothubs only if there are pending events.
+		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+		 * the first wake signalling failed, give it that chance.
+		 */
+		pending_portevent = xhci_pending_portevent(xhci);
+		if (!pending_portevent) {
+			msleep(120);
+			pending_portevent = xhci_pending_portevent(xhci);
+		}
+
+		if (pending_portevent) {
 			usb_hcd_resume_root_hub(xhci->shared_hcd);
 			usb_hcd_resume_root_hub(hcd);
 		}
 	}
-
 	/*
 	 * If system is subject to the Quirk, Compliance Mode Timer needs to
 	 * be re-initialized Always after a system resume. Ports are subject