drm/panel: samsung-s6d7aa0: drop DRM_BUS_FLAG_DE_HIGH for lsl080al02

It turns out that I had misconfigured the device I was using the panel
with; the bus data polarity is not high for this panel, I had to change
the config on the display controller's side.

Fix the panel config to properly reflect its accurate settings.

Fixes: 6810bb3 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105-tab3-display-fixes-v2-2-904d1207bf6f@gmail.com

Author: refractionware

drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c

@@ -309,7 +309,7 @@ static const struct s6d7aa0_panel_desc s6d7aa0_lsl080al02_desc = {
 	.off_func = s6d7aa0_lsl080al02_off,
 	.drm_mode = &s6d7aa0_lsl080al02_mode,
 	.mode_flags = MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_NO_HFP,
-	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.bus_flags = 0,
 
 	.has_backlight = false,
 	.use_passwd3 = false,