dt-bindings: phy: ti,phy-usb3: convert to DT schema

Convert TI PIPE3 PHY binding to DT schema.
Changes during conversion:
- Define a new pattern 'pcie-phy' to match nodes defined in DT.
- Drop obsolete "id" property from the schema.

Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260123-ti-phy-v4-2-b557e2c46e6f@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Author: Charan-Pedumuru

Documentation/devicetree/bindings/phy/ti,phy-usb3.yaml

@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/ti,phy-usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI PIPE3 PHY Module
+
+maintainers:
+  - Roger Quadros <rogerq@ti.com>
+
+description:
+  The TI PIPE3 PHY is a high-speed SerDes (Serializer/Deserializer)
+  transceiver integrated in OMAP5, DRA7xx/AM57xx, and similar SoCs.
+  It supports multiple protocols (USB3, SATA, PCIe) using the PIPE3
+  interface standard, which defines a common physical layer for
+  high-speed serial interfaces.
+
+properties:
+  $nodename:
+    pattern: "^(pcie-phy|usb3-phy|phy)@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - ti,omap-usb3
+      - ti,phy-pipe3-pcie
+      - ti,phy-pipe3-sata
+      - ti,phy-usb3
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: phy_rx
+      - const: phy_tx
+      - const: pll_ctrl
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 7
+
+  clock-names:
+    minItems: 2
+    maxItems: 7
+    items:
+      enum: [wkupclk, sysclk, refclk, dpll_ref,
+             dpll_ref_m2, phy-div, div-clk]
+
+  syscon-phy-power:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    items:
+      items:
+        - description: Phandle to the system control module
+        - description: Register offset controlling PHY power
+
+  syscon-pllreset:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    items:
+      items:
+        - description: Phandle to the system control module
+        - description: Register offset of CTRL_CORE_SMA_SW_0
+
+  syscon-pcs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    items:
+      items:
+        - description: Phandle to the system control module
+        - description: Register offset for PCS delay programming
+
+  ctrl-module:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of control module for PHY power on.
+    deprecated: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,phy-pipe3-sata
+    then:
+      properties:
+        syscon-pllreset: true
+    else:
+      properties:
+        syscon-pllreset: false
+
+required:
+  - reg
+  - compatible
+  - reg-names
+  - "#phy-cells"
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* TI PIPE3 USB3 PHY */
+    usb3-phy@4a084400 {
+        compatible = "ti,phy-usb3";
+        reg = <0x4a084400 0x80>,
+              <0x4a084800 0x64>,
+              <0x4a084c00 0x40>;
+        reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+        #phy-cells = <0>;
+        clocks = <&usb_phy_cm_clk32k>,
+                 <&sys_clkin>,
+                 <&usb_otg_ss_refclk960m>;
+        clock-names = "wkupclk", "sysclk", "refclk";
+        ctrl-module = <&omap_control_usb>;
+    };
+
+  - |
+    /* TI PIPE3 SATA PHY */
+    phy@4a096000 {
+        compatible = "ti,phy-pipe3-sata";
+        reg = <0x4a096000 0x80>,  /* phy_rx */
+              <0x4a096400 0x64>,  /* phy_tx */
+              <0x4a096800 0x40>;  /* pll_ctrl */
+        reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+        clocks = <&sys_clkin1>, <&sata_ref_clk>;
+        clock-names = "sysclk", "refclk";
+        syscon-pllreset = <&scm_conf 0x3fc>;
+        #phy-cells = <0>;
+    };
+...