pinctrl: mvebu: Fix i2c sda definition for 98DX3236

Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
the board tested 0x4 resulted in a non-functioning i2c bus so stick with
0x1 which works.

Fixes: d7ae8f8 ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20200907211712.9697-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Author: cpackham-atlnz

drivers/pinctrl/mvebu/pinctrl-armada-xp.c

@@ -414,7 +414,7 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
 		 MPP_VAR_FUNCTION(0x1, "i2c0", "sck",        V_98DX3236_PLUS)),
 	MPP_MODE(15,
 		 MPP_VAR_FUNCTION(0x0, "gpio", NULL,         V_98DX3236_PLUS),
-		 MPP_VAR_FUNCTION(0x4, "i2c0", "sda",        V_98DX3236_PLUS)),
+		 MPP_VAR_FUNCTION(0x1, "i2c0", "sda",        V_98DX3236_PLUS)),
 	MPP_MODE(16,
 		 MPP_VAR_FUNCTION(0x0, "gpo", NULL,          V_98DX3236_PLUS),
 		 MPP_VAR_FUNCTION(0x4, "dev", "oe",          V_98DX3236_PLUS)),