Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.4-rc1:

 - Fix the frequency unit in cpufreq_verify_current_freq checks()
   (Sanjay Chandrashekara).

 - Make mode_state_machine in amd-pstate static (Tom Rix).

 - Make the cpufreq core require drivers with target_index() to set
   freq_table (Viresh Kumar).

 - Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).

 - Use of_property_read_bool() for boolean properties in the pmac32
   cpufreq driver (Rob Herring).

 - Make the cpufreq sysfs interface return proper error codes on
   obviously invalid input (qinyu).

 - Add guided autonomous mode support to the AMD P-state driver (Wyes
   Karny).

 - Make the Intel P-state driver enable HWP IO boost on all server
   platforms (Srinivas Pandruvada).

 - Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
   Gupta).

 - Use of_property_present() for testing DT property presence (Rob
   Herring).

 - Remove MODULE_LICENSE in non-modules (Nick Alcock).

 - Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).

 - Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
   Kozlowski, Konrad Dybcio, and Bjorn Andersson).

 - DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
   Bartosz Golaszewski).

 - Updates and fixes for mediatek driver (Jia-Wei Chang and
   AngeloGioacchino Del Regno).

* pm-cpufreq: (29 commits)
  cpufreq: use correct unit when verify cur freq
  cpufreq: tegra194: add OPP support and set bandwidth
  cpufreq: amd-pstate: Make varaiable mode_state_machine static
  cpufreq: drivers with target_index() must set freq_table
  cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
  dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
  dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
  cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
  cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
  cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
  cpufreq: mediatek: raise proc/sram max voltage for MT8516
  cpufreq: mediatek: fix KP caused by handler usage after regulator_put/clk_put
  cpufreq: mediatek: fix passing zero to 'PTR_ERR'
  cpufreq: pmac32: Use of_property_read_bool() for boolean properties
  cpufreq: Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry
  cpufreq: warn about invalid vals to scaling_max/min_freq interfaces
  Documentation: cpufreq: amd-pstate: Update amd_pstate status sysfs for guided
  cpufreq: amd-pstate: Add guided mode control support via sysfs
  cpufreq: amd-pstate: Add guided autonomous mode
  ...

Author: rafaeljw

Documentation/admin-guide/kernel-parameters.txt

@@ -339,6 +339,29 @@
 			             This mode requires kvm-amd.avic=1.
 			             (Default when IOMMU HW support is present.)
 
+	amd_pstate=	[X86]
+			disable
+			  Do not enable amd_pstate as the default
+			  scaling driver for the supported processors
+			passive
+			  Use amd_pstate with passive mode as a scaling driver.
+			  In this mode autonomous selection is disabled.
+			  Driver requests a desired performance level and platform
+			  tries to match the same performance level if it is
+			  satisfied by guaranteed performance level.
+			active
+			  Use amd_pstate_epp driver instance as the scaling driver,
+			  driver provides a hint to the hardware if software wants
+			  to bias toward performance (0x0) or energy efficiency (0xff)
+			  to the CPPC firmware. then CPPC power algorithm will
+			  calculate the runtime workload and adjust the realtime cores
+			  frequency.
+			guided
+			  Activate guided autonomous mode. Driver requests minimum and
+			  maximum performance level and the platform autonomously
+			  selects a performance level in this range and appropriate
+			  to the current workload.
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -7059,20 +7082,3 @@
 				xmon commands.
 			off	xmon is disabled.
 
-	amd_pstate=	[X86]
-			disable
-			  Do not enable amd_pstate as the default
-			  scaling driver for the supported processors
-			passive
-			  Use amd_pstate as a scaling driver, driver requests a
-			  desired performance on this abstract scale and the power
-			  management firmware translates the requests into actual
-			  hardware states (core frequency, data fabric and memory
-			  clocks etc.)
-			active
-			  Use amd_pstate_epp driver instance as the scaling driver,
-			  driver provides a hint to the hardware if software wants
-			  to bias toward performance (0x0) or energy efficiency (0xff)
-			  to the CPPC firmware. then CPPC power algorithm will
-			  calculate the runtime workload and adjust the realtime cores
-			  frequency.

Documentation/admin-guide/pm/amd-pstate.rst

@@ -303,13 +303,18 @@ efficiency frequency management method on AMD processors.
 AMD Pstate Driver Operation Modes
 =================================
 
-``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
-CPPC non-autonomous(passive) mode.
-active mode and passive mode can be chosen by different kernel parameters.
-When in Autonomous mode, CPPC ignores requests done in the Desired Performance
-Target register and takes into account only the values set to the Minimum requested
-performance, Maximum requested performance, and Energy Performance Preference
-registers. When Autonomous is disabled, it only considers the Desired Performance Target.
+``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
+non-autonomous (passive) mode and guided autonomous (guided) mode.
+Active/passive/guided mode can be chosen by different kernel parameters.
+
+- In autonomous mode, platform ignores the desired performance level request
+  and takes into account only the values set to the minimum, maximum and energy
+  performance preference registers.
+- In non-autonomous mode, platform gets desired performance level
+  from OS directly through Desired Performance Register.
+- In guided-autonomous mode, platform sets operating performance level
+  autonomously according to the current workload and within the limits set by
+  OS through min and max performance registers.
 
 Active Mode
 ------------
@@ -338,6 +343,15 @@ to the Performance Reduction Tolerance register. Above the nominal performance l
 processor must provide at least nominal performance requested and go higher if current
 operating conditions allow.
 
+Guided Mode
+-----------
+
+``amd_pstate=guided``
+
+If ``amd_pstate=guided`` is passed to kernel command line option then this mode
+is activated.  In this mode, driver requests minimum and maximum performance
+level and the platform autonomously selects a performance level in this range
+and appropriate to the current workload.
 
 User Space Interface in ``sysfs`` - General
 ===========================================
@@ -358,6 +372,9 @@ control its functionality at the system level.  They are located in the
 	"passive"
 		The driver is functional and in the ``passive mode``
 
+	"guided"
+		The driver is functional and in the ``guided mode``
+
 	"disable"
 		The driver is unregistered and not functional now.
 

Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml

@@ -20,12 +20,20 @@ properties:
     oneOf:
       - description: v1 of CPUFREQ HW
         items:
+          - enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm8150-cpufreq-hw
           - const: qcom,cpufreq-hw
 
       - description: v2 of CPUFREQ HW (EPSS)
         items:
           - enum:
               - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
               - qcom,sc7280-cpufreq-epss
               - qcom,sc8280xp-cpufreq-epss
               - qcom,sm6375-cpufreq-epss
@@ -36,14 +44,14 @@ properties:
           - const: qcom,cpufreq-epss
 
   reg:
-    minItems: 2
+    minItems: 1
     items:
       - description: Frequency domain 0 register region
       - description: Frequency domain 1 register region
       - description: Frequency domain 2 register region
 
   reg-names:
-    minItems: 2
+    minItems: 1
     items:
       - const: freq-domain0
       - const: freq-domain1
@@ -85,6 +93,111 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        reg-names:
+          minItems: 1
+          maxItems: 1
+
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+        interrupt-names:
+          minItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm6375-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        # On some SoCs the Prime core shares the LMH irq with Big cores
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
@@ -235,7 +348,7 @@ examples:
       #size-cells = <1>;
 
       cpufreq@17d43000 {
-        compatible = "qcom,cpufreq-hw";
+        compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
         reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
         reg-names = "freq-domain0", "freq-domain1";