intel_idle: Add AlderLake-N support

Similar to the other other AlderLake platforms, the C1 and C1E states on
ADL-N are mutually exclusive. Only one of them can be enabled at a time.

C1E is preferred on ADL-N for better energy efficiency.

C6S is also supported on this platform. Its latency is far bigger than
C6, but really close to C8 (PC8), thus it is not exposed as a separate
state.

Suggested-by: Baieswara Reddy Sagili <baieswara.reddy.sagili@intel.com>
Suggested-by: Vinay Kumar <vinay.kumar@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Author: zhang-rui

drivers/idle/intel_idle.c

@@ -928,6 +928,51 @@ static struct cpuidle_state adl_l_cstates[] __initdata = {
 		.enter = NULL }
 };
 
+static struct cpuidle_state adl_n_cstates[] __initdata = {
+	{
+		.name = "C1",
+		.desc = "MWAIT 0x00",
+		.flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_UNUSABLE,
+		.exit_latency = 1,
+		.target_residency = 1,
+		.enter = &intel_idle,
+		.enter_s2idle = intel_idle_s2idle, },
+	{
+		.name = "C1E",
+		.desc = "MWAIT 0x01",
+		.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
+		.exit_latency = 2,
+		.target_residency = 4,
+		.enter = &intel_idle,
+		.enter_s2idle = intel_idle_s2idle, },
+	{
+		.name = "C6",
+		.desc = "MWAIT 0x20",
+		.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 195,
+		.target_residency = 585,
+		.enter = &intel_idle,
+		.enter_s2idle = intel_idle_s2idle, },
+	{
+		.name = "C8",
+		.desc = "MWAIT 0x40",
+		.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 260,
+		.target_residency = 1040,
+		.enter = &intel_idle,
+		.enter_s2idle = intel_idle_s2idle, },
+	{
+		.name = "C10",
+		.desc = "MWAIT 0x60",
+		.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 660,
+		.target_residency = 1980,
+		.enter = &intel_idle,
+		.enter_s2idle = intel_idle_s2idle, },
+	{
+		.enter = NULL }
+};
+
 static struct cpuidle_state spr_cstates[] __initdata = {
 	{
 		.name = "C1",
@@ -1309,6 +1354,10 @@ static const struct idle_cpu idle_cpu_adl_l __initconst = {
 	.state_table = adl_l_cstates,
 };
 
+static const struct idle_cpu idle_cpu_adl_n __initconst = {
+	.state_table = adl_n_cstates,
+};
+
 static const struct idle_cpu idle_cpu_spr __initconst = {
 	.state_table = spr_cstates,
 	.disable_promotion_to_c1e = true,
@@ -1379,6 +1428,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&idle_cpu_icx),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		&idle_cpu_adl),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&idle_cpu_adl_l),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N,		&idle_cpu_adl_n),
 	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&idle_cpu_spr),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL,	&idle_cpu_knl),
 	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM,	&idle_cpu_knl),
@@ -1816,6 +1866,7 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv)
 		break;
 	case INTEL_FAM6_ALDERLAKE:
 	case INTEL_FAM6_ALDERLAKE_L:
+	case INTEL_FAM6_ALDERLAKE_N:
 		adl_idle_state_table_update();
 		break;
 	}