thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values

According to the msm-3.18 vendor kernel from Qualcomm [1], mdm9607 uses
a non-standard slope value of 3000 (instead of 3200) for all sensors.
Fill it properly similar to the 8939 code added recently.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LE.UM.4.3.2.r1-04200-9x07/arch/arm/boot/dts/qcom/mdm9607.dtsi#L875

Fixes: a2149ab ("thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230508-msm8909-tsens-v5-2-5eb632235ba7@kernkonzept.com

Author: stephan-gh

drivers/thermal/qcom/tsens-v0_1.c

@@ -234,6 +234,16 @@ static int __init init_8939(struct tsens_priv *priv) {
 	return init_common(priv);
 }
 
+static int __init init_9607(struct tsens_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < priv->num_sensors; ++i)
+		priv->sensor[i].slope = 3000;
+
+	return init_common(priv);
+}
+
 /* v0.1: 8226, 8916, 8939, 8974, 9607 */
 
 static struct tsens_features tsens_v0_1_feat = {
@@ -345,9 +355,15 @@ struct tsens_plat_data data_8974 = {
 	.fields	= tsens_v0_1_regfields,
 };
 
+static const struct tsens_ops ops_9607 = {
+	.init		= init_9607,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_common,
+};
+
 struct tsens_plat_data data_9607 = {
 	.num_sensors	= 5,
-	.ops		= &ops_v0_1,
+	.ops		= &ops_9607,
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
 };