Skip to content

Commit 6928a3c

Browse files
ChiYuan Huangbroonie
ChiYuan Huang
authored and
broonie
committed
regulator: Add Richtek RT4803 boost regulator
RT4803 is a boost converter that integrates an internal bypass FET. It will automatically transform the operation mode between bypass and boost based on the voltage difference of the input and output voltage. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1680050606-461-2-git-send-email-cy_huang@richtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
1 parent e126cda commit 6928a3c

3 files changed

Lines changed: 227 additions & 0 deletions

File tree

‎drivers/regulator/Kconfig‎

Lines changed: 10 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -1082,6 +1082,16 @@ config REGULATOR_RT4801
10821082
This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
10831083
The device supports two regulators (DSVP/DSVN).
10841084

1085+
config REGULATOR_RT4803
1086+
tristate "Richtek RT4803 boost regualtor"
1087+
depends on I2C
1088+
select REGMAP_I2C
1089+
help
1090+
This adds support for RT4803 boost converter that integrates the
1091+
bypass switch. If the input voltage is low than the required voltage,
1092+
RT4803 will enter boost mode. Otherwise, enable internal bypass
1093+
switch to enter bypass mode.
1094+
10851095
config REGULATOR_RT4831
10861096
tristate "Richtek RT4831 DSV Regulators"
10871097
depends on MFD_RT4831

‎drivers/regulator/Makefile‎

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -130,6 +130,7 @@ obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
130130
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
131131
obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o
132132
obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o
133+
obj-$(CONFIG_REGULATOR_RT4803) += rt4803.o
133134
obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o
134135
obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
135136
obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o

‎drivers/regulator/rt4803.c‎

Lines changed: 216 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,216 @@
1+
// SPDX-License-Identifier: GPL-2.0-only
2+
/*
3+
* Copyright (C) 2023 Richtek Technology Corp.
4+
*
5+
* Author: ChiYuan Huang <cy_huang@richtek.com>
6+
*/
7+
8+
#include <linux/i2c.h>
9+
#include <linux/kernel.h>
10+
#include <linux/mod_devicetable.h>
11+
#include <linux/module.h>
12+
#include <linux/property.h>
13+
#include <linux/regmap.h>
14+
#include <linux/regulator/driver.h>
15+
#include <linux/regulator/of_regulator.h>
16+
17+
#define RT4803_AUTO_MODE 1
18+
#define RT4803_FPWM_MODE 2
19+
20+
#define RT4803_REG_CONFIG 0x01
21+
#define RT4803_REG_VSELL 0x02
22+
#define RT4803_REG_VSELH 0x03
23+
#define RT4803_REG_ILIM 0x04
24+
#define RT4803_REG_STAT 0x05
25+
26+
#define RT4803_MODE_MASK GENMASK(1, 0)
27+
#define RT4803_VSEL_MASK GENMASK(4, 0)
28+
#define RT4803_ILIM_MASK GENMASK(3, 0)
29+
#define RT4803_TSD_MASK BIT(7)
30+
#define RT4803_HOTDIE_MASK BIT(6)
31+
#define RT4803_FAULT_MASK BIT(1)
32+
#define RT4803_PGOOD_MASK BIT(0)
33+
34+
#define RT4803_VOUT_MINUV 2850000
35+
#define RT4803_VOUT_STEPUV 50000
36+
#define RT4803_VOUT_NUM 32
37+
38+
static int rt4803_set_mode(struct regulator_dev *rdev, unsigned int mode)
39+
{
40+
struct regmap *regmap = rdev_get_regmap(rdev);
41+
unsigned int modeval;
42+
43+
switch (mode) {
44+
case REGULATOR_MODE_NORMAL:
45+
modeval = RT4803_AUTO_MODE;
46+
break;
47+
case REGULATOR_MODE_FAST:
48+
modeval = RT4803_FPWM_MODE;
49+
break;
50+
default:
51+
return -EINVAL;
52+
}
53+
54+
modeval <<= ffs(RT4803_MODE_MASK) - 1;
55+
56+
return regmap_update_bits(regmap, RT4803_REG_CONFIG, RT4803_MODE_MASK, modeval);
57+
}
58+
59+
static unsigned int rt4803_get_mode(struct regulator_dev *rdev)
60+
{
61+
struct regmap *regmap = rdev_get_regmap(rdev);
62+
unsigned int modeval;
63+
int ret;
64+
65+
ret = regmap_read(regmap, RT4803_REG_CONFIG, &modeval);
66+
if (ret)
67+
return REGULATOR_MODE_INVALID;
68+
69+
modeval >>= ffs(RT4803_MODE_MASK) - 1;
70+
71+
switch (modeval) {
72+
case RT4803_AUTO_MODE:
73+
return REGULATOR_MODE_NORMAL;
74+
case RT4803_FPWM_MODE:
75+
return REGULATOR_MODE_FAST;
76+
default:
77+
return REGULATOR_MODE_INVALID;
78+
}
79+
}
80+
81+
static int rt4803_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
82+
{
83+
struct regmap *regmap = rdev_get_regmap(rdev);
84+
unsigned int state, events = 0;
85+
int ret;
86+
87+
ret = regmap_read(regmap, RT4803_REG_STAT, &state);
88+
if (ret)
89+
return ret;
90+
91+
if (state & RT4803_PGOOD_MASK)
92+
goto out_error_flag;
93+
94+
if (state & RT4803_FAULT_MASK)
95+
events |= REGULATOR_ERROR_FAIL;
96+
97+
if (state & RT4803_HOTDIE_MASK)
98+
events |= REGULATOR_ERROR_OVER_TEMP_WARN;
99+
100+
if (state & RT4803_TSD_MASK)
101+
events |= REGULATOR_ERROR_OVER_TEMP;
102+
103+
out_error_flag:
104+
*flags = events;
105+
return 0;
106+
}
107+
108+
static int rt4803_set_suspend_voltage(struct regulator_dev *rdev, int uV)
109+
{
110+
struct regmap *regmap = rdev_get_regmap(rdev);
111+
unsigned int reg, vsel;
112+
113+
if (rdev->desc->vsel_reg == RT4803_REG_VSELL)
114+
reg = RT4803_REG_VSELH;
115+
else
116+
reg = RT4803_REG_VSELL;
117+
118+
vsel = (uV - rdev->desc->min_uV) / rdev->desc->uV_step;
119+
vsel <<= ffs(RT4803_VSEL_MASK) - 1;
120+
121+
return regmap_update_bits(regmap, reg, RT4803_VSEL_MASK, vsel);
122+
}
123+
124+
static const struct regulator_ops rt4803_regulator_ops = {
125+
.list_voltage = regulator_list_voltage_linear,
126+
.set_voltage_sel = regulator_set_voltage_sel_regmap,
127+
.get_voltage_sel = regulator_get_voltage_sel_regmap,
128+
.set_mode = rt4803_set_mode,
129+
.get_mode = rt4803_get_mode,
130+
.get_error_flags = rt4803_get_error_flags,
131+
.set_suspend_voltage = rt4803_set_suspend_voltage,
132+
};
133+
134+
static unsigned int rt4803_of_map_mode(unsigned int mode)
135+
{
136+
switch (mode) {
137+
case RT4803_AUTO_MODE:
138+
return REGULATOR_MODE_NORMAL;
139+
case RT4803_FPWM_MODE:
140+
return REGULATOR_MODE_FAST;
141+
default:
142+
return REGULATOR_MODE_INVALID;
143+
}
144+
}
145+
146+
static const struct regmap_config rt4803_regmap_config = {
147+
.reg_bits = 8,
148+
.val_bits = 8,
149+
.max_register = RT4803_REG_STAT,
150+
};
151+
152+
static int rt4803_probe(struct i2c_client *i2c)
153+
{
154+
struct device *dev = &i2c->dev;
155+
struct regmap *regmap;
156+
struct regulator_desc *desc;
157+
struct regulator_config cfg = {};
158+
struct regulator_dev *rdev;
159+
bool vsel_act_high;
160+
int ret;
161+
162+
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
163+
if (!desc)
164+
return -ENOMEM;
165+
166+
regmap = devm_regmap_init_i2c(i2c, &rt4803_regmap_config);
167+
if (IS_ERR(regmap))
168+
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
169+
170+
/* Always configure the input current limit to max 5A at initial */
171+
ret = regmap_update_bits(regmap, RT4803_REG_ILIM, RT4803_ILIM_MASK, 0xff);
172+
if (ret)
173+
return dev_err_probe(dev, ret, "Failed to config ILIM to max\n");
174+
175+
vsel_act_high = device_property_read_bool(dev, "richtek,vsel-active-high");
176+
177+
desc->name = "rt4803-regulator";
178+
desc->type = REGULATOR_VOLTAGE;
179+
desc->owner = THIS_MODULE;
180+
desc->ops = &rt4803_regulator_ops;
181+
desc->min_uV = RT4803_VOUT_MINUV;
182+
desc->uV_step = RT4803_VOUT_STEPUV;
183+
desc->n_voltages = RT4803_VOUT_NUM;
184+
desc->vsel_mask = RT4803_VSEL_MASK;
185+
desc->of_map_mode = rt4803_of_map_mode;
186+
if (vsel_act_high)
187+
desc->vsel_reg = RT4803_REG_VSELH;
188+
else
189+
desc->vsel_reg = RT4803_REG_VSELL;
190+
191+
cfg.dev = dev;
192+
cfg.of_node = dev_of_node(dev);
193+
cfg.init_data = of_get_regulator_init_data(dev, dev_of_node(dev), desc);
194+
195+
rdev = devm_regulator_register(dev, desc, &cfg);
196+
return PTR_ERR_OR_ZERO(rdev);
197+
}
198+
199+
static const struct of_device_id rt4803_device_match_table[] = {
200+
{ .compatible = "richtek,rt4803" },
201+
{}
202+
};
203+
MODULE_DEVICE_TABLE(of, rt4803_device_match_table);
204+
205+
static struct i2c_driver rt4803_driver = {
206+
.driver = {
207+
.name = "rt4803",
208+
.of_match_table = rt4803_device_match_table,
209+
},
210+
.probe = rt4803_probe,
211+
};
212+
module_i2c_driver(rt4803_driver);
213+
214+
MODULE_DESCRIPTION("Richtek RT4803 voltage regulator driver");
215+
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
216+
MODULE_LICENSE("GPL");

0 commit comments

Comments
 (0)