Merge series "Initial Fairphone 4 support" from Luca Weiss <luca@z3ntu.xyz>:

This series adds basic support for the recently announced Fairphone 4
smartphone, based on the Snapdragon 750G (sm7225).

This adds support for UART, power & volume buttons, screen based on
simple-framebuffer, regulators and USB.

v2 fixes some stylistic problems in dts and corrects the situation with
pm6350 regulator supplies.

Luca Weiss (11):
  clk: qcom: add select QCOM_GDSC for SM6350
  dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350
  regulator: qcom-rpmh: Add PM6350 regulators
  dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350
  pinctrl: qcom: spmi-gpio: Add compatible for PM6350
  arm64: dts: qcom: Add PM6350 PMIC
  arm64: dts: qcom: sm6350: add debug uart
  dt-bindings: arm: cpus: Add Kryo 570 CPUs
  dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board
  arm64: dts: qcom: Add SM7225 device tree
  arm64: dts: qcom: sm7225: Add device tree for Fairphone 4

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml      |   2 +
 .../regulator/qcom,rpmh-regulator.yaml        |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6350.dtsi          |  54 +++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  31 ++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 320 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225.dtsi          |  16 +
 drivers/clk/qcom/Kconfig                      |   1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   1 +
 drivers/regulator/qcom-rpmh-regulator.c       |  32 ++
 12 files changed, 467 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi

--
2.33.0

Author: broonie

Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml

@@ -35,6 +35,7 @@ description: |
     PMIC. Supported regulator node names are
       For PM6150, smps1 - smps5, ldo1 - ldo19
       For PM6150L, smps1 - smps8, ldo1 - ldo11, bob
+      For PM6350, smps1 - smps5, ldo1 - ldo22
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
@@ -52,6 +53,7 @@ properties:
     enum:
       - qcom,pm6150-rpmh-regulators
       - qcom,pm6150l-rpmh-regulators
+      - qcom,pm6350-rpmh-regulators
       - qcom,pm7325-rpmh-regulators
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators

drivers/regulator/qcom-rpmh-regulator.c

@@ -1047,6 +1047,34 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pm6350_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, NULL),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps510, NULL),
+	/* smps3 - smps5 not configured */
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo,      NULL),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_nldo,      NULL),
+	/* ldo17 not configured */
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo20",  "ldo%s20", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo21",  "ldo%s21", &pmic5_nldo,      NULL),
+	RPMH_VREG("ldo22",  "ldo%s22", &pmic5_nldo,      NULL),
+};
+
 static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	RPMH_VREG("smps1",   "smp%s1",    &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",   "smp%s2",    &pmic5_hfsmps510, "vdd-s2"),
@@ -1201,6 +1229,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm6150l-rpmh-regulators",
 		.data = pm6150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm6350-rpmh-regulators",
+		.data = pm6350_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmc8180-rpmh-regulators",
 		.data = pm8150_vreg_data,