mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.

Fixes: 066ecde ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Author: hkallweit

drivers/mmc/host/meson-gx-mmc.c

@@ -435,7 +435,8 @@ static int meson_mmc_clk_init(struct meson_host *host)
 	clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
 	clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
 	clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
-	clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
+	if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+		clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
 	writel(clk_reg, host->regs + SD_EMMC_CLOCK);
 
 	/* get the mux parents */
@@ -948,16 +949,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 {
 	struct meson_host *host = dev_id;
 	struct mmc_command *cmd;
-	u32 status, raw_status;
+	u32 status, raw_status, irq_mask = IRQ_EN_MASK;
 	irqreturn_t ret = IRQ_NONE;
 
+	if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+		irq_mask |= IRQ_SDIO;
 	raw_status = readl(host->regs + SD_EMMC_STATUS);
-	status = raw_status & (IRQ_EN_MASK | IRQ_SDIO);
+	status = raw_status & irq_mask;
 
 	if (!status) {
 		dev_dbg(host->dev,
-			"Unexpected IRQ! irq_en 0x%08lx - status 0x%08x\n",
-			 IRQ_EN_MASK | IRQ_SDIO, raw_status);
+			"Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
+			 irq_mask, raw_status);
 		return IRQ_NONE;
 	}
 
@@ -1204,6 +1207,11 @@ static int meson_mmc_probe(struct platform_device *pdev)
 		goto free_host;
 	}
 
+	mmc->caps |= MMC_CAP_CMD23;
+
+	if (mmc->caps & MMC_CAP_SDIO_IRQ)
+		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
 	host->data = (struct meson_mmc_data *)
 		of_device_get_match_data(&pdev->dev);
 	if (!host->data) {
@@ -1277,11 +1285,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&host->lock);
 
-	mmc->caps |= MMC_CAP_CMD23;
-
-	if (mmc->caps & MMC_CAP_SDIO_IRQ)
-		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
-
 	if (host->dram_access_quirk) {
 		/* Limit segments to 1 due to low available sram memory */
 		mmc->max_segs = 1;