Merge tag 'v5.11' into rdma.git for-next

Linux 5.11

Merged to resolve conflicts with RDMA rc commits

- drivers/infiniband/sw/rxe/rxe_net.c
  The final logic is to call rxe_get_dev_from_net() again with the master
  netdev if the packet was rx'd on a vlan. To keep the elimination of the
  local variables requires a trivial edit to the code in -rc

Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Author: jgunthorpe

.clang-format

@@ -122,6 +122,7 @@ ForEachMacros:
   - 'drm_for_each_bridge_in_chain'
   - 'drm_for_each_connector_iter'
   - 'drm_for_each_crtc'
+  - 'drm_for_each_crtc_reverse'
   - 'drm_for_each_encoder'
   - 'drm_for_each_encoder_mask'
   - 'drm_for_each_fb'
@@ -203,14 +204,13 @@ ForEachMacros:
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
   - 'for_each_member'
-  - 'for_each_mem_region'
-  - 'for_each_memblock_type'
   - 'for_each_memcg_cache_index'
   - 'for_each_mem_pfn_range'
   - '__for_each_mem_range'
   - 'for_each_mem_range'
   - '__for_each_mem_range_rev'
   - 'for_each_mem_range_rev'
+  - 'for_each_mem_region'
   - 'for_each_migratetype_order'
   - 'for_each_msi_entry'
   - 'for_each_msi_entry_safe'
@@ -276,10 +276,8 @@ ForEachMacros:
   - 'for_each_reserved_mem_range'
   - 'for_each_reserved_mem_region'
   - 'for_each_rtd_codec_dais'
-  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
   - 'for_each_rtd_cpu_dais'
-  - 'for_each_rtd_cpu_dais_rollback'
   - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
@@ -298,6 +296,7 @@ ForEachMacros:
   - '__for_each_thread'
   - 'for_each_thread'
   - 'for_each_unicast_dest_pgid'
+  - 'for_each_vsi'
   - 'for_each_wakeup_source'
   - 'for_each_zone'
   - 'for_each_zone_zonelist'
@@ -330,6 +329,7 @@ ForEachMacros:
   - 'hlist_for_each_entry_rcu_bh'
   - 'hlist_for_each_entry_rcu_notrace'
   - 'hlist_for_each_entry_safe'
+  - 'hlist_for_each_entry_srcu'
   - '__hlist_for_each_rcu'
   - 'hlist_for_each_safe'
   - 'hlist_nulls_for_each_entry'
@@ -378,6 +378,7 @@ ForEachMacros:
   - 'list_for_each_entry_safe_continue'
   - 'list_for_each_entry_safe_from'
   - 'list_for_each_entry_safe_reverse'
+  - 'list_for_each_entry_srcu'
   - 'list_for_each_prev'
   - 'list_for_each_prev_safe'
   - 'list_for_each_safe'
@@ -411,6 +412,8 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcl_for_each_chunk'
+  - 'pcl_for_each_segment'
   - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'

.mailmap

@@ -9,9 +9,6 @@
 #
 # Please keep this list dictionary sorted.
 #
-# This comment is parsed by git-shortlog:
-# repo-abbrev: /pub/scm/linux/kernel/git/
-#
 Aaron Durbin <adurbin@google.com>
 Adam Oldham <oldhamca@gmail.com>
 Adam Radford <aradford@gmail.com>
@@ -40,6 +37,7 @@ Andrew Murray <amurray@thegoodpenguin.co.uk> <amurray@embedded-bits.co.uk>
 Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
+Andrey Ryabinin <ryabinin.a.a@gmail.com> <aryabinin@virtuozzo.com>
 Andy Adamson <andros@citi.umich.edu>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@bootlin.com>
 Antoine Tenart <atenart@kernel.org> <antoine.tenart@free-electrons.com>
@@ -55,6 +53,8 @@ Bart Van Assche <bvanassche@acm.org> <bart.vanassche@wdc.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>
+Björn Töpel <bjorn@kernel.org> <bjorn.topel@gmail.com>
+Björn Töpel <bjorn@kernel.org> <bjorn.topel@intel.com>
 Boris Brezillon <bbrezillon@kernel.org> <b.brezillon.dev@gmail.com>
 Boris Brezillon <bbrezillon@kernel.org> <b.brezillon@overkiz.com>
 Boris Brezillon <bbrezillon@kernel.org> <boris.brezillon@bootlin.com>
@@ -180,6 +180,8 @@ Kees Cook <keescook@chromium.org> <kees.cook@canonical.com>
 Kees Cook <keescook@chromium.org> <keescook@google.com>
 Kees Cook <keescook@chromium.org> <kees@outflux.net>
 Kees Cook <keescook@chromium.org> <kees@ubuntu.com>
+Keith Busch <kbusch@kernel.org> <keith.busch@intel.com>
+Keith Busch <kbusch@kernel.org> <keith.busch@linux.intel.com>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <khlebnikov@yandex-team.ru>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
@@ -200,6 +202,8 @@ Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
 Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
+Manivannan Sadhasivam <mani@kernel.org> <manivannanece23@gmail.com>
+Manivannan Sadhasivam <mani@kernel.org> <manivannan.sadhasivam@linaro.org>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
 Mark Brown <broonie@sirena.org.uk>
@@ -245,6 +249,7 @@ Morten Welinder <welinder@anemone.rentec.com>
 Morten Welinder <welinder@darter.rentec.com>
 Morten Welinder <welinder@troll.com>
 Mythri P K <mythripk@ti.com>
+Nathan Chancellor <nathan@kernel.org> <natechancellor@gmail.com>
 Nguyen Anh Quynh <aquynh@gmail.com>
 Nicolas Ferre <nicolas.ferre@microchip.com> <nicolas.ferre@atmel.com>
 Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org>
@@ -335,6 +340,8 @@ Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
+Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.org>
+Viresh Kumar <viresh.kumar@linaro.org> <viresh.kumar@linaro.com>
 Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
 Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>

Documentation/ABI/testing/sysfs-class-devlink

@@ -5,8 +5,8 @@ Description:
 		Provide a place in sysfs for the device link objects in the
 		kernel at any given time.  The name of a device link directory,
 		denoted as ... above, is of the form <supplier>--<consumer>
-		where <supplier> is the supplier device name and <consumer> is
-		the consumer device name.
+		where <supplier> is the supplier bus:device name and <consumer>
+		is the consumer bus:device name.
 
 What:		/sys/class/devlink/.../auto_remove_on
 Date:		May 2020

Documentation/ABI/testing/sysfs-devices-consumer

@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../consumer:<consumer> are symlinks to device
 		links where this device is the supplier. <consumer> denotes the
-		name of the consumer in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the consumer in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.

Documentation/ABI/testing/sysfs-devices-supplier

@@ -4,5 +4,6 @@ Contact:	Saravana Kannan <saravanak@google.com>
 Description:
 		The /sys/devices/.../supplier:<supplier> are symlinks to device
 		links where this device is the consumer. <supplier> denotes the
-		name of the supplier in that device link. There can be zero or
-		more of these symlinks for a given device.
+		name of the supplier in that device link and is of the form
+		bus:device name. There can be zero or more of these symlinks
+		for a given device.

Documentation/ABI/testing/sysfs-driver-ufs

@@ -916,21 +916,25 @@ Date:		September 2014
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
 		runtime power management level. The current driver
-		implementation supports 6 levels with next target states:
+		implementation supports 7 levels with next target states:
 
 		==  ====================================================
-		0   an UFS device will stay active, an UIC link will
+		0   UFS device will stay active, UIC link will
 		    stay active
-		1   an UFS device will stay active, an UIC link will
+		1   UFS device will stay active, UIC link will
 		    hibernate
-		2   an UFS device will moved to sleep, an UIC link will
+		2   UFS device will be moved to sleep, UIC link will
 		    stay active
-		3   an UFS device will moved to sleep, an UIC link will
+		3   UFS device will be moved to sleep, UIC link will
 		    hibernate
-		4   an UFS device will be powered off, an UIC link will
+		4   UFS device will be powered off, UIC link will
 		    hibernate
-		5   an UFS device will be powered off, an UIC link will
+		5   UFS device will be powered off, UIC link will
 		    be powered off
+		6   UFS device will be moved to deep sleep, UIC link
+		    will be powered off. Note, deep sleep might not be
+		    supported in which case this value will not be
+		    accepted
 		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
@@ -954,21 +958,25 @@ Date:		September 2014
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
 		system power management level. The current driver
-		implementation supports 6 levels with next target states:
+		implementation supports 7 levels with next target states:
 
 		==  ====================================================
-		0   an UFS device will stay active, an UIC link will
+		0   UFS device will stay active, UIC link will
 		    stay active
-		1   an UFS device will stay active, an UIC link will
+		1   UFS device will stay active, UIC link will
 		    hibernate
-		2   an UFS device will moved to sleep, an UIC link will
+		2   UFS device will be moved to sleep, UIC link will
 		    stay active
-		3   an UFS device will moved to sleep, an UIC link will
+		3   UFS device will be moved to sleep, UIC link will
 		    hibernate
-		4   an UFS device will be powered off, an UIC link will
+		4   UFS device will be powered off, UIC link will
 		    hibernate
-		5   an UFS device will be powered off, an UIC link will
+		5   UFS device will be powered off, UIC link will
 		    be powered off
+		6   UFS device will be moved to deep sleep, UIC link
+		    will be powered off. Note, deep sleep might not be
+		    supported in which case this value will not be
+		    accepted
 		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state

Documentation/Makefile

@@ -75,7 +75,7 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
       cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media $2 && \
 	PYTHONDONTWRITEBYTECODE=1 \
 	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
-	$(PYTHON) $(srctree)/scripts/jobserver-exec \
+	$(PYTHON3) $(srctree)/scripts/jobserver-exec \
 	$(SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \
 	$(SPHINXBUILD) \
 	-b $2 \

Documentation/admin-guide/cgroup-v2.rst

@@ -1029,7 +1029,7 @@ All time durations are in microseconds.
 	one number is written, $MAX is updated.
 
   cpu.pressure
-	A read-only nested-key file which exists on non-root cgroups.
+	A read-write nested-keyed file.
 
 	Shows pressure stall information for CPU. See
 	:ref:`Documentation/accounting/psi.rst <psi>` for details.
@@ -1475,7 +1475,7 @@ PAGE_SIZE multiple when read back.
 	reduces the impact on the workload and memory management.
 
   memory.pressure
-	A read-only nested-key file which exists on non-root cgroups.
+	A read-only nested-keyed file.
 
 	Shows pressure stall information for memory. See
 	:ref:`Documentation/accounting/psi.rst <psi>` for details.
@@ -1714,7 +1714,7 @@ IO Interface Files
 	  8:16 rbps=2097152 wbps=max riops=max wiops=max
 
   io.pressure
-	A read-only nested-key file which exists on non-root cgroups.
+	A read-only nested-keyed file.
 
 	Shows pressure stall information for IO. See
 	:ref:`Documentation/accounting/psi.rst <psi>` for details.

Documentation/admin-guide/device-mapper/dm-integrity.rst

@@ -177,14 +177,20 @@ bitmap_flush_interval:number
 	The bitmap flush interval in milliseconds. The metadata buffers
 	are synchronized when this interval expires.
 
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
 fix_padding
 	Use a smaller padding of the tag area that is more
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-allow_discards
-	Allow block discard requests (a.k.a. TRIM) for the integrity device.
-	Discards are only allowed to devices using internal hash.
+legacy_recalculate
+	Allow recalculating of volumes with HMAC keys. This is disabled by
+	default for security reasons - an attacker could modify the volume,
+	set recalc_sector to zero, and the kernel would not detect the
+	modification.
 
 The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
 allow_discards can be changed when reloading the target (load an inactive

Documentation/admin-guide/media/rkisp1.rst

@@ -13,6 +13,22 @@ This file documents the driver for the Rockchip ISP1 that is part of RK3288
 and RK3399 SoCs. The driver is located under drivers/staging/media/rkisp1
 and uses the Media-Controller API.
 
+Revisions
+=========
+
+There exist multiple smaller revisions to this ISP that got introduced in
+later SoCs. Revisions can be found in the enum :c:type:`rkisp1_cif_isp_version`
+in the UAPI and the revision of the ISP inside the running SoC can be read
+in the field hw_revision of struct media_device_info as returned by
+ioctl MEDIA_IOC_DEVICE_INFO.
+
+Versions in use are:
+
+- RKISP1_V10: used at least in rk3288 and rk3399
+- RKISP1_V11: declared in the original vendor code, but not used
+- RKISP1_V12: used at least in rk3326 and px30
+- RKISP1_V13: used at least in rk1808
+
 Topology
 ========
 .. _rkisp1_topology_graph: