power: supply: Add STC3117 fuel gauge unit driver

Adds initial support for the STC3117 fuel gauge.

The driver provides functionality to monitor key parameters including:
Voltage, Current, State of Charge (SOC), Temperature, Status

Co-developed-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Link: https://lore.kernel.org/r/20241220084958.32367-3-bhavin.sharma@siliconsignals.io
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Author: S-Bhavin

MAINTAINERS

@@ -22165,6 +22165,14 @@ T:	git git://linuxtv.org/media.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
 F:	drivers/media/i2c/st-mipid02.c
 
+ST STC3117 FUEL GAUGE DRIVER
+M:	Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
+M:	Bhavin Sharma <bhavin.sharma@siliconsignals.io>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
+F:	drivers/power/supply/stc3117_fuel_gauge.c
+
 ST STM32 FIREWALL
 M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
 S:	Maintained

drivers/power/supply/Kconfig

@@ -918,6 +918,15 @@ config FUEL_GAUGE_SC27XX
 	  Say Y here to enable support for fuel gauge with SC27XX
 	  PMIC chips.
 
+config FUEL_GAUGE_STC3117
+       tristate "STMicroelectronics STC3117 fuel gauge driver"
+       depends on CRC8
+       depends on I2C
+	select REGMAP_I2C
+       help
+         Say Y here to enable support for fuel gauge with STC3117
+         chip.
+
 config CHARGER_UCS1002
 	tristate "Microchip UCS1002 USB Port Power Controller"
 	depends on I2C

drivers/power/supply/Makefile

@@ -108,6 +108,7 @@ obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o
 obj-$(CONFIG_CHARGER_CROS_PCHG)	+= cros_peripheral_charger.o
 obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o
 obj-$(CONFIG_FUEL_GAUGE_SC27XX)	+= sc27xx_fuel_gauge.o
+obj-$(CONFIG_FUEL_GAUGE_STC3117)       += stc3117_fuel_gauge.o
 obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
 obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
 obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o