HID: i2c-hid: Do panel follower work on the system_wq

Turning on an i2c-hid device can be a slow process. This is why
i2c-hid devices use PROBE_PREFER_ASYNCHRONOUS. Unfortunately, when
we're a panel follower the i2c-hid power up sequence now blocks the
power on of the panel. Let's fix that by scheduling the work on the
system_wq.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.10.I962bb462ede779005341c49320740ed95810021d@changeid

Author: dianders

drivers/hid/i2c-hid/i2c-hid-core.c

@@ -110,7 +110,9 @@ struct i2c_hid {
 
 	struct i2chid_ops	*ops;
 	struct drm_panel_follower panel_follower;
+	struct work_struct	panel_follower_prepare_work;
 	bool			is_panel_follower;
+	bool			prepare_work_finished;
 };
 
 static const struct i2c_hid_quirks {
@@ -1062,26 +1064,65 @@ static int __do_i2c_hid_core_initial_power_up(struct i2c_hid *ihid)
 	return ret;
 }
 
-static int i2c_hid_core_panel_prepared(struct drm_panel_follower *follower)
+static void ihid_core_panel_prepare_work(struct work_struct *work)
 {
-	struct i2c_hid *ihid = container_of(follower, struct i2c_hid, panel_follower);
+	struct i2c_hid *ihid = container_of(work, struct i2c_hid,
+					    panel_follower_prepare_work);
 	struct hid_device *hid = ihid->hid;
+	int ret;
 
 	/*
 	 * hid->version is set on the first power up. If it's still zero then
 	 * this is the first power on so we should perform initial power up
 	 * steps.
 	 */
 	if (!hid->version)
-		return __do_i2c_hid_core_initial_power_up(ihid);
+		ret = __do_i2c_hid_core_initial_power_up(ihid);
+	else
+		ret = i2c_hid_core_resume(ihid);
 
-	return i2c_hid_core_resume(ihid);
+	if (ret)
+		dev_warn(&ihid->client->dev, "Power on failed: %d\n", ret);
+	else
+		WRITE_ONCE(ihid->prepare_work_finished, true);
+
+	/*
+	 * The work APIs provide a number of memory ordering guarantees
+	 * including one that says that memory writes before schedule_work()
+	 * are always visible to the work function, but they don't appear to
+	 * guarantee that a write that happened in the work is visible after
+	 * cancel_work_sync(). We'll add a write memory barrier here to match
+	 * with i2c_hid_core_panel_unpreparing() to ensure that our write to
+	 * prepare_work_finished is visible there.
+	 */
+	smp_wmb();
+}
+
+static int i2c_hid_core_panel_prepared(struct drm_panel_follower *follower)
+{
+	struct i2c_hid *ihid = container_of(follower, struct i2c_hid, panel_follower);
+
+	/*
+	 * Powering on a touchscreen can be a slow process. Queue the work to
+	 * the system workqueue so we don't block the panel's power up.
+	 */
+	WRITE_ONCE(ihid->prepare_work_finished, false);
+	schedule_work(&ihid->panel_follower_prepare_work);
+
+	return 0;
 }
 
 static int i2c_hid_core_panel_unpreparing(struct drm_panel_follower *follower)
 {
 	struct i2c_hid *ihid = container_of(follower, struct i2c_hid, panel_follower);
 
+	cancel_work_sync(&ihid->panel_follower_prepare_work);
+
+	/* Match with ihid_core_panel_prepare_work() */
+	smp_rmb();
+	if (!READ_ONCE(ihid->prepare_work_finished))
+		return 0;
+
 	return i2c_hid_core_suspend(ihid, true);
 }
 
@@ -1173,6 +1214,7 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 
 	init_waitqueue_head(&ihid->wait);
 	mutex_init(&ihid->reset_lock);
+	INIT_WORK(&ihid->panel_follower_prepare_work, ihid_core_panel_prepare_work);
 
 	/* we need to allocate the command buffer without knowing the maximum
 	 * size of the reports. Let's use HID_MIN_BUFFER_SIZE, then we do the