dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string

The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
So remove the workaround safely.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240424064508.1886764-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

Author: 1991Joyzou

drivers/dma/fsl-edma-common.c

@@ -76,18 +76,10 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
 
 	flags = fsl_edma_drvflags(fsl_chan);
 	val = edma_readl_chreg(fsl_chan, ch_sbr);
-	/* Remote/local swapped wrongly on iMX8 QM Audio edma */
-	if (flags & FSL_EDMA_DRV_QUIRK_SWAPPED) {
-		if (!fsl_chan->is_rxchan)
-			val |= EDMA_V3_CH_SBR_RD;
-		else
-			val |= EDMA_V3_CH_SBR_WR;
-	} else {
-		if (fsl_chan->is_rxchan)
-			val |= EDMA_V3_CH_SBR_RD;
-		else
-			val |= EDMA_V3_CH_SBR_WR;
-	}
+	if (fsl_chan->is_rxchan)
+		val |= EDMA_V3_CH_SBR_RD;
+	else
+		val |= EDMA_V3_CH_SBR_WR;
 
 	if (fsl_chan->is_remote)
 		val &= ~(EDMA_V3_CH_SBR_RD | EDMA_V3_CH_SBR_WR);

drivers/dma/fsl-edma-common.h

@@ -194,8 +194,6 @@ struct fsl_edma_desc {
 #define FSL_EDMA_DRV_HAS_PD		BIT(5)
 #define FSL_EDMA_DRV_HAS_CHCLK		BIT(6)
 #define FSL_EDMA_DRV_HAS_CHMUX		BIT(7)
-/* imx8 QM audio edma remote local swapped */
-#define FSL_EDMA_DRV_QUIRK_SWAPPED	BIT(8)
 /* control and status register is in tcd address space, edma3 reg layout */
 #define FSL_EDMA_DRV_SPLIT_REG		BIT(9)
 #define FSL_EDMA_DRV_BUS_8BYTE		BIT(10)

drivers/dma/fsl-edma-main.c

@@ -348,13 +348,6 @@ static struct fsl_edma_drvdata imx8qm_data = {
 	.setup_irq = fsl_edma3_irq_init,
 };
 
-static struct fsl_edma_drvdata imx8qm_audio_data = {
-	.flags = FSL_EDMA_DRV_QUIRK_SWAPPED | FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3,
-	.chreg_space_sz = 0x10000,
-	.chreg_off = 0x10000,
-	.setup_irq = fsl_edma3_irq_init,
-};
-
 static struct fsl_edma_drvdata imx8ulp_data = {
 	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_CHCLK | FSL_EDMA_DRV_HAS_DMACLK |
 		 FSL_EDMA_DRV_EDMA3,
@@ -396,7 +389,6 @@ static const struct of_device_id fsl_edma_dt_ids[] = {
 	{ .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data},
 	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
 	{ .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data},
-	{ .compatible = "fsl,imx8qm-adma", .data = &imx8qm_audio_data},
 	{ .compatible = "fsl,imx8ulp-edma", .data = &imx8ulp_data},
 	{ .compatible = "fsl,imx93-edma3", .data = &imx93_data3},
 	{ .compatible = "fsl,imx93-edma4", .data = &imx93_data4},