Merge tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes

Drop some not-specified properties, fix phy-supply properties,
fix edp clock on Gru, fix usb port on BPI-R2-Pro, fix license typo,
fix wlan-wake-pin on Gru-Bob and lower the sd-card speed on Quartz64-B

* tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
  arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
  arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
  arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
  arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
  arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
  arm64: dts: rockchip: Fix typo in lisense text for PX30.Core
  arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob
  arm64: dts: rockchip: Lower sd speed on quartz64-b

Link: https://lore.kernel.org/r/2645885.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Author: arndb

arch/arm64/boot/dts/rockchip/px30-engicam-px30-core.dtsi

@@ -2,8 +2,8 @@
 /*
  * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
  * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutons
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions
+ * Copyright (c) 2020 Amarula Solutions(India)
  */
 
 #include <dt-bindings/gpio/gpio.h>

arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts

@@ -88,3 +88,8 @@
 		};
 	};
 };
+
+&wlan_host_wake_l {
+	/* Kevin has an external pull up, but Bob does not. */
+	rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+};

arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi

@@ -244,6 +244,14 @@
 &edp {
 	status = "okay";
 
+	/*
+	 * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
+	 * set this here, because rk3399-gru.dtsi ensures we can generate this
+	 * off GPLL=600MHz, whereas some other RK3399 boards may not.
+	 */
+	assigned-clocks = <&cru PCLK_EDP>;
+	assigned-clock-rates = <24000000>;
+
 	ports {
 		edp_out: port@1 {
 			reg = <1>;
@@ -578,6 +586,7 @@ ap_i2c_tp: &i2c5 {
 	};
 
 	wlan_host_wake_l: wlan-host-wake-l {
+		/* Kevin has an external pull up, but Bob does not */
 		rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 	};
 };

arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi

@@ -62,7 +62,6 @@
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
-		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts

@@ -189,7 +189,6 @@
 
 	vcc3v3_sd: vcc3v3_sd {
 		compatible = "regulator-fixed";
-		enable-active-low;
 		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc_sd_h>;

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -506,7 +506,7 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-	sd-uhs-sdr104;
+	sd-uhs-sdr50;
 	vmmc-supply = <&vcc3v3_sd>;
 	vqmmc-supply = <&vccio_sd>;
 	status = "okay";

arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts

@@ -678,7 +678,7 @@
 };
 
 &usb_host0_xhci {
-	extcon = <&usb2phy0>;
+	dr_mode = "host";
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts

@@ -656,7 +656,7 @@
 };
 
 &usb2phy0_otg {
-	vbus-supply = <&vcc5v0_usb_otg>;
+	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts

@@ -581,7 +581,7 @@
 };
 
 &usb2phy0_otg {
-	vbus-supply = <&vcc5v0_usb_otg>;
+	phy-supply = <&vcc5v0_usb_otg>;
 	status = "okay";
 };