Commit 7e842d7
memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode
HyperFlash devices fail to probe:
rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed
In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits
(SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived
from half of the transfer size, cfr. the rpcif_bits_set() helper
function. However, rpcif_reg_{read,write}() does not take the bus size
into account, and does not double all Manual Mode Data Register access
sizes when communicating with a HyperFlash or Octal-SPI Flash device.
Fix this, and avoid the back-and-forth conversion between transfer size
and Transfer Data Enable bits, by explicitly storing the transfer size
in struct rpcif, and using that value to determine access size in
rpcif_reg_{read,write}().
Enforce that the "high" Manual Mode Read/Write Data Registers
(SM[RW]DR1) are only used for 8-byte data accesses.
While at it, forbid writing to the Manual Mode Read Data Registers,
as they are read-only.
Fixes: fff53a5 ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be
Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>1 parent 67e473a commit 7e842d7
2 files changed
Lines changed: 47 additions & 14 deletions
| Original file line number | Diff line number | Diff line change | |
|---|---|---|---|
| |||
164 | 164 | | |
165 | 165 | | |
166 | 166 | | |
167 | | - | |
168 | | - | |
| 167 | + | |
| 168 | + | |
169 | 169 | | |
170 | 170 | | |
171 | 171 | | |
172 | 172 | | |
173 | 173 | | |
174 | | - | |
175 | | - | |
176 | | - | |
177 | | - | |
| 174 | + | |
| 175 | + | |
| 176 | + | |
| 177 | + | |
| 178 | + | |
178 | 179 | | |
179 | 180 | | |
180 | | - | |
| 181 | + | |
| 182 | + | |
181 | 183 | | |
182 | 184 | | |
183 | | - | |
| 185 | + | |
| 186 | + | |
| 187 | + | |
| 188 | + | |
| 189 | + | |
| 190 | + | |
| 191 | + | |
184 | 192 | | |
185 | 193 | | |
| 194 | + | |
| 195 | + | |
| 196 | + | |
| 197 | + | |
| 198 | + | |
| 199 | + | |
186 | 200 | | |
187 | 201 | | |
188 | 202 | | |
| |||
193 | 207 | | |
194 | 208 | | |
195 | 209 | | |
196 | | - | |
197 | | - | |
198 | | - | |
199 | | - | |
| 210 | + | |
| 211 | + | |
| 212 | + | |
| 213 | + | |
200 | 214 | | |
201 | 215 | | |
202 | | - | |
| 216 | + | |
| 217 | + | |
203 | 218 | | |
204 | 219 | | |
205 | | - | |
| 220 | + | |
| 221 | + | |
| 222 | + | |
| 223 | + | |
| 224 | + | |
| 225 | + | |
| 226 | + | |
206 | 227 | | |
207 | 228 | | |
| 229 | + | |
| 230 | + | |
| 231 | + | |
| 232 | + | |
| 233 | + | |
| 234 | + | |
| 235 | + | |
| 236 | + | |
| 237 | + | |
208 | 238 | | |
209 | 239 | | |
210 | 240 | | |
| |||
469 | 499 | | |
470 | 500 | | |
471 | 501 | | |
| 502 | + | |
472 | 503 | | |
473 | 504 | | |
474 | 505 | | |
| |||
533 | 564 | | |
534 | 565 | | |
535 | 566 | | |
| 567 | + | |
536 | 568 | | |
537 | 569 | | |
538 | 570 | | |
| |||
| Original file line number | Diff line number | Diff line change | |
|---|---|---|---|
| |||
72 | 72 | | |
73 | 73 | | |
74 | 74 | | |
| 75 | + | |
75 | 76 | | |
76 | 77 | | |
77 | 78 | | |
| |||
0 commit comments