PCI: qcom: Drop manual pipe_clk_src handling

Manual reparenting of pipe_clk_src is being replaced with the parking of
the clock with clk_disable()/clk_enable() in the PHY driver. Drop
redundant code switching of the pipe clock between the PHY clock source
and the safe bi_tcxo.

Link: https://lore.kernel.org/r/20220608105238.2973600-6-dmitry.baryshkov@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

Author: lumag

drivers/pci/controller/dwc/pcie-qcom.c

@@ -164,9 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk_src;
-	struct clk *phy_pipe_clk;
-	struct clk *ref_clk_src;
 };
 
 union qcom_pcie_resources {
@@ -192,7 +189,6 @@ struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
-	unsigned int pipe_clk_need_muxing:1;
 	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
 	unsigned int has_aggre0_clk:1;
@@ -1188,20 +1184,6 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
-	if (pcie->cfg->pipe_clk_need_muxing) {
-		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
-		if (IS_ERR(res->pipe_clk_src))
-			return PTR_ERR(res->pipe_clk_src);
-
-		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
-		if (IS_ERR(res->phy_pipe_clk))
-			return PTR_ERR(res->phy_pipe_clk);
-
-		res->ref_clk_src = devm_clk_get(dev, "ref");
-		if (IS_ERR(res->ref_clk_src))
-			return PTR_ERR(res->ref_clk_src);
-	}
-
 	return 0;
 }
 
@@ -1219,10 +1201,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	/* Set TCXO as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
-
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
@@ -1284,18 +1262,8 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
 	clk_bulk_disable_unprepare(res->num_clks, res->clks);
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-}
 
-static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	/* Set pipe clock as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
-
-	return 0;
+	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1476,7 +1444,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1485,7 +1452,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
@@ -1530,22 +1496,19 @@ static const struct qcom_pcie_cfg sm8250_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre0_clk = true,
 	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 };
 
 static const struct qcom_pcie_cfg sc8180x_cfg = {