Merge tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, mostly DT fixes for the major Arm platforms from Qualcomm
  and NXP, plus a bit for Rockchips and others:

  The qualcomm fixes mainly deal with their higher-end arm64 devices
  trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
  regression for the DSI phy.

  NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
  the imx93 "anatop" module and the CSI interface. On the 32-bit side,
  there are functional fixes for RTC, display and SD card intefaces.

  Rockchip fixes are for wifi support on certain boards, a eMMC
  stability and DT build warnings.

  On TI OMAP, a regulator is described in DT to avoid problems with the
  ethernet phy initialization.

  The code changes include a missing MMIO serialization on OMAP, plus a
  few minor fixes on ASpeed and AMD/Zynq chips"

* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
  ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
  soc: aspeed: socinfo: Add kfree for kstrdup
  soc: aspeed: uart-routing: Use __sysfs_match_string
  ARM: dts: integrator: fix PCI bus dtc warnings
  arm64: dts: imx93: Fix anatop node size
  arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
  ARM: dts: imx: Set default tuning step for imx6sx usdhc
  arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
  arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
  ARM: dts: imx: Set default tuning step for imx7d usdhc
  ARM: dts: imx6: phytec: fix RTC interrupt level
  ARM: dts: imx6sx: Remove LDB endpoint
  arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
  ARM: zynq: Explicitly include correct DT includes
  arm64: dts: qcom: sa8775p-ride: Update L4C parameters
  arm64: dts: rockchip: minor whitespace cleanup around '='
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: add missing space before { on indiedroid nova
  ...

Author: torvalds

arch/arm/boot/dts/arm/integratorap.dts

@@ -158,7 +158,7 @@
 		valid-mask = <0x003fffff>;
 	};
 
-	pci: pciv3@62000000 {
+	pci: pci@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
 		device_type = "pci";
 		#interrupt-cells = <1>;

arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi

@@ -182,7 +182,7 @@
 		pinctrl-0 = <&pinctrl_rtc_int>;
 		reg = <0x68>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/nxp/imx/imx6sx.dtsi

@@ -863,7 +863,6 @@
 							reg = <0>;
 
 							ldb_from_lcdif1: endpoint {
-								remote-endpoint = <&lcdif1_to_ldb>;
 							};
 						};
 
@@ -1010,6 +1009,8 @@
 					 <&clks IMX6SX_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -1022,6 +1023,8 @@
 					 <&clks IMX6SX_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -1034,6 +1037,8 @@
 					 <&clks IMX6SX_CLK_USDHC3>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
 				status = "disabled";
 			};
 
@@ -1309,11 +1314,8 @@
 					power-domains = <&pd_disp>;
 					status = "disabled";
 
-					ports {
-						port {
-							lcdif1_to_ldb: endpoint {
-								remote-endpoint = <&ldb_from_lcdif1>;
-							};
+					port {
+						lcdif1_to_ldb: endpoint {
 						};
 					};
 				};

arch/arm/boot/dts/nxp/imx/imx7s.dtsi

@@ -1184,6 +1184,8 @@
 					<&clks IMX7D_USDHC1_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1196,6 +1198,8 @@
 					<&clks IMX7D_USDHC2_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1212,8 @@
 					<&clks IMX7D_USDHC3_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi

@@ -145,6 +145,8 @@
 			/* MDIO */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE7)
 		>;
 	};
 
@@ -153,6 +155,8 @@
 			/* MDIO reset value */
 			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
 			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* Added to support GPIO controlled PHY reset */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
@@ -215,6 +219,7 @@
 	baseboard_eeprom: baseboard_eeprom@50 {
 		compatible = "atmel,24c256";
 		reg = <0x50>;
+		vcc-supply = <&ldo4_reg>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -377,6 +382,10 @@
 
 	ethphy0: ethernet-phy@0 {
 		reg = <0>;
+		/* Support GPIO reset on revision C3 boards */
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <300>;
+		reset-deassert-us = <6500>;
 	};
 };
 

arch/arm/mach-zynq/pm.c

@@ -8,8 +8,8 @@
  */
 
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_device.h>
 #include "common.h"
 
 /* register offsets */

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -1221,10 +1221,9 @@
 				compatible = "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e30000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
-						  <&clk IMX8MM_CLK_CSI1_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
-							  <&clk IMX8MM_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
 				clock-frequency = <333000000>;
 				clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
 					 <&clk IMX8MM_CLK_CSI1_ROOT>,

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -1175,10 +1175,8 @@
 				compatible = "fsl,imx8mm-mipi-csi2";
 				reg = <0x32e30000 0x1000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>,
-						  <&clk IMX8MN_CLK_CSI1_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>,
-							  <&clk IMX8MN_SYS_PLL2_1000M>;
+				assigned-clocks = <&clk IMX8MN_CLK_CAMERA_PIXEL>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>;
 				assigned-clock-rates = <333000000>;
 				clock-frequency = <333000000>;
 				clocks = <&clk IMX8MN_CLK_DISP_APB_ROOT>,

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -340,7 +340,7 @@
 
 			anatop: anatop@44480000 {
 				compatible = "fsl,imx93-anatop", "syscon";
-				reg = <0x44480000 0x10000>;
+				reg = <0x44480000 0x2000>;
 			};
 
 			adc1: adc@44530000 {

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -121,7 +121,7 @@
 			};
 		};
 
-		pm8150l-thermal {
+		pm8150l-pcb-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;