drm/msm/hdmi: switch to pm_runtime_resume_and_get()

The pm_runtime_get_sync() function is a bad choise for runtime power
management. Switch HDMI driver to pm_runtime_resume_and_get() and add
proper error handling, while we are at it.

Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/651713/
Link: https://lore.kernel.org/r/20250505-fd-hdmi-hpd-v5-7-48541f76318c@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

Author: lumag

drivers/gpu/drm/msm/hdmi/hdmi_bridge.c

@@ -21,7 +21,7 @@ static void msm_hdmi_power_on(struct drm_bridge *bridge)
 	const struct hdmi_platform_config *config = hdmi->config;
 	int ret;
 
-	pm_runtime_get_sync(&hdmi->pdev->dev);
+	pm_runtime_resume_and_get(&hdmi->pdev->dev);
 
 	ret = regulator_bulk_enable(config->pwr_reg_cnt, hdmi->pwr_regs);
 	if (ret)

drivers/gpu/drm/msm/hdmi/hdmi_hpd.c

@@ -85,7 +85,12 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
 	if (hdmi->hpd_gpiod)
 		gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
 
-	pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "runtime resume failed: %d\n", ret);
+		goto fail;
+	}
+
 	ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
 	if (ret)
 		goto fail;
@@ -178,7 +183,10 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
 	u32 hpd_int_status = 0;
 	int ret;
 
-	pm_runtime_get_sync(&hdmi->pdev->dev);
+	ret = pm_runtime_resume_and_get(&hdmi->pdev->dev);
+	if (ret)
+		goto out;
+
 	ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
 	if (ret)
 		goto out;

drivers/gpu/drm/msm/hdmi/hdmi_phy.c

@@ -58,7 +58,11 @@ int msm_hdmi_phy_resource_enable(struct hdmi_phy *phy)
 	struct device *dev = &phy->pdev->dev;
 	int i, ret = 0;
 
-	pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret) {
+		DRM_DEV_ERROR(dev, "runtime resume failed: %d\n", ret);
+		return ret;
+	}
 
 	ret = regulator_bulk_enable(cfg->num_regs, phy->regs);
 	if (ret) {