Merge tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for Maxim MAX77714 PMIC

  Removed Drivers:
   - Remove support for ST-Ericsson AB8500 DebugFS

  New Device Support:
   - Add support for Silergy SY7636A to Simple MFD I2C
   - Add support for MediaTek MT6366 PMIC to MT6358 IRQ
   - Add support for Charger to Intel PMIC CRC
   - Add support for Raptor Lake to Intel LPSS PCI

  New Functionality:
   - Add support for Reboot to Rockchip RK808

  Fix-ups:
   - Device Tree changes (includcing YAML conversion) for
     silergy,sy7636a, maxim,max77843, google,cros-ec, maxim,max14577,
     maxim,max77802, maxim,max77714, qcom,tcsr, qcom,spmi-pmic,
     stericsson,ab8500, stericsson,db8500-prcmu,
     samsung,exynos5433-lpass, mt6397, syscon, brcm,cru
   - Visible to menuconfig; simple-mfd-i2c
   - Clean-up or clarify code; max77686, intel_soc_pmic_crc
   - Improve error handling; mc13xxx-core, stmfx, asic3
   - Pass device information to child devices; iqs62x, intel-lpss-acpi
   - Individually identify IRQ domains; intel_soc_pmic_core
   - Remove superfluous code; dbx500-prcmu, exynos-lpass
   - Staticify and constify; arizona-i2c
   - Mark sometimes used data as __maybe_unused; atmel-flexcom
   - Account for different ACPI tables on AOSP/Windows platforms; arizona-spi
   - Use provided (platform) APIs; ab8500-core
   - Trivial (whitespace, spelling); rohm-bd9576"

* tag 'mfd-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits)
  dt-bindings: mfd: syscon: Add microchip,lan966x-cpu-syscon compatible
  mfd: bd9576: fix typos in comments
  mfd: Use platform_get_irq() to get the interrupt
  mfd: db8500-prcmu: Remove unused inline function
  mfd: arizona-spi: Add Android board ACPI table handling
  mfd: arizona-spi: Split Windows ACPI init code into its own function
  mfd: asic3: Add missing iounmap() on error asic3_mfd_probe
  MAINTAINERS: Rectify entry for ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
  mfd: intel-lpss: Provide an SSP type to the driver
  dt-bindings: mfd: brcm,cru: Rename pinctrl node
  dt-bindings: Add compatibles for undocumented trivial syscons
  mfd: atmel-flexcom: Fix compilation warning
  dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC
  dt-bindings: mfd: samsung,exynos5433-lpass: Convert to dtschema
  mfd: exynos-lpass: Drop unneeded syscon.h include
  mfd: intel-lpss: Add Intel Raptor Lake PCH-S PCI IDs
  mfd: ab8500: Drop debugfs module
  mfd: sta2x11: Use GFP_KERNEL instead of GFP_ATOMIC
  mfd: ab8500: Rewrite bindings in YAML
  mfd: qcom-spmi-pmic: Add pm8953 compatible
  ...

Author: torvalds

Documentation/devicetree/bindings/leds/maxim,max77693.yaml

@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false