riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC

Add the quad spi controller node for the StarFive JH7110 SoC.

Co-developed-by: Ziv Xu <ziv.xu@starfivetech.com>
Signed-off-by: Ziv Xu <ziv.xu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Author: littleqyp

arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi

@@ -185,6 +185,42 @@
 	status = "okay";
 };
 
+&qspi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		cdns,read-delay = <5>;
+		spi-max-frequency = <12000000>;
+		cdns,tshsl-ns = <1>;
+		cdns,tsd2d-ns = <1>;
+		cdns,tchsh-ns = <1>;
+		cdns,tslch-ns = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spl@0 {
+				reg = <0x0 0x80000>;
+			};
+			uboot-env@f0000 {
+				reg = <0xf0000 0x10000>;
+			};
+			uboot@100000 {
+				reg = <0x100000 0x400000>;
+			};
+			reserved-data@600000 {
+				reg = <0x600000 0x1000000>;
+			};
+		};
+	};
+};
+
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins>;

arch/riscv/boot/dts/starfive/jh7110.dtsi

@@ -676,6 +676,25 @@
 			status = "disabled";
 		};
 
+		qspi: spi@13010000 {
+			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x13010000 0x0 0x10000>,
+			      <0x0 0x21000000 0x0 0x400000>;
+			interrupts = <25>;
+			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
+				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
+				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
+			clock-names = "ref", "ahb", "apb";
+			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
+				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
+				 <&syscrg JH7110_SYSRST_QSPI_REF>;
+			reset-names = "qspi", "qspi-ocp", "rstc_ref";
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			status = "disabled";
+		};
+
 		spi3: spi@12070000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0x12070000 0x0 0x10000>;