mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask

NXP ESDHC supports setting data timeout using uSDHCx_SYS_CTRL register
DTOCV bits (bits 16-19).
Currently the driver accesses those bits by 32-bit write using
SDHCI_TIMEOUT_CONTROL (0x2E) defined in drivers/mmc/host/sdhci.h.
This is offset by two bytes relative to uSDHCx_SYS_CTRL (0x2C).
The driver also defines ESDHC_SYS_CTRL_DTOCV_MASK as first 4 bits, which
is correct relative to SDHCI_TIMEOUT_CONTROL but not relative to
uSDHCx_SYS_CTRL. The definition carrying control register in its name is
therefore inconsistent.

Update the bitmask definition for bits 16-19 to be correct relative to
control register base.
Update the esdhc_set_timeout function to set timeout value at control
register base, not timeout offset.

This solves a purely cosmetic problem.

Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241101-imx-emmc-reset-v3-2-184965eed476@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Author: Josua-SR

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -30,7 +30,7 @@
 #include "sdhci-esdhc.h"
 #include "cqhci.h"
 
-#define ESDHC_SYS_CTRL_DTOCV_MASK	0x0f
+#define ESDHC_SYS_CTRL_DTOCV_MASK	GENMASK(19, 16)
 #define ESDHC_SYS_CTRL_IPP_RST_N	BIT(23)
 #define	ESDHC_CTRL_D3CD			0x08
 #define ESDHC_BURST_LEN_EN_INCR		(1 << 27)
@@ -1391,8 +1391,8 @@ static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 
 	/* use maximum timeout counter */
 	esdhc_clrset_le(host, ESDHC_SYS_CTRL_DTOCV_MASK,
-			esdhc_is_usdhc(imx_data) ? 0xF : 0xE,
-			SDHCI_TIMEOUT_CONTROL);
+			esdhc_is_usdhc(imx_data) ? 0xF0000 : 0xE0000,
+			ESDHC_SYSTEM_CONTROL);
 }
 
 static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask)